Answer:
gravity
Explanation:
What is the role of the brain in helping an animal interact with its environment?
Answer:
The nature of the environment and the animal's interaction with it determines much of the character of the brain.
Explanation:
In fact, most of what we would use to describe ourselves to others reflects this sort of information storage. Much of this information is unique to the individual and hence may involve different mechanisms from those used for species-typical information storage.
What causes different colors to appear in the sky.
Answer:
The colors of the sunset result from a phenomenon called scattering. Molecules and small particles in the atmosphere change the direction of light rays, causing them to scatter. ... The short-wavelength blue and violet are scattered by molecules in the air much more than other colors of the spectrum.
Explanation:
Answer:
The scattering and reflection of light by dust particles.
FIGURE 1 shows a horizontal human arm lifting a dumbbell. The forearm is
in equilibrium under the action of the weight of the dumbbell, the tension
in the tendon connected to the biceps muscle, and the force exerted on the
forearm itself. (For clarity, the point A where the tendon is attached is drawn
farther from the elbow than its actual position) Given the weight of the forearm
is 20 N and the mass of the dumbbell is 20 kg. The angle between the tension
force and the horizontal, is 80°. The length of the horizontal arm is 0.30 m.
The horizontal distance between elbow pivot and point A is 0.050 m. Find and
the vector and draw free body diagram for this case
Answer:
Explanation:
See attached file for answer.
You may have noticed runaway truck lanes while driving in the mountains. These gravel-filled lanes are designed to stop trucks that have lost their brakes on mountain grades. Typically, such a lane is horizontal (if possible) and about 36.0 m36.0 m long. Think of the ground as exerting a frictional drag force on the truck. A truck enters a typical runaway lane with a speed of 50.5 mph50.5 mph ( 22.6 m/s22.6 m/s ). Use the work-energy theorem to find the minimum coefficient of kinetic friction between the truck and the lane to be able to stop the truck.
Answer:
The coefficient of kinetic friction [tex]\mu_k = 0.724[/tex]
Explanation:
From the question we are told that
The length of the lane is [tex]l = 36.0 \ m[/tex]
The speed of the truck is [tex]v = 22.6\ m/s[/tex]
Generally from the work-energy theorem we have that
[tex]\Delta KE = N * \mu_k * l[/tex]
Here N is the normal force acting on the truck which is mathematically represented as
[tex]\Delta KE[/tex] is the change in kinetic energy which is mathematically represented as
[tex]\Delta KE = \frac{1}{2} * m * v^2 [/tex]
=> [tex]\Delta KE = 0.5 * m * 22.6^2 [/tex]
=> [tex]\Delta KE = 255.38m [/tex]
[tex] 255.38m = m * 9.8 * \mu_k * 36.0 [/tex]
=> [tex] 255.38 = 352.8 * \mu_k [/tex]
=> [tex]\mu_k = 0.724[/tex]
Use the drop-down menus to order the steps for writing chemical formulas.
- Identify the elements in the compound.
- Write the chemical symbols in the order shown in the name.
- Use the periodic table to find the symbols of elements in the compound.
- Use prefixes to determine the number of each type of atom in the compound.
- Use subscripts to show the number of each type of atom in the compound.
Answer:
1,3,2,4,5
Explanation:
Because I had right
Following these steps will help write chemical formulas by identifying the elements, finding their symbols, arranging them in order, and determining the appropriate prefixes representing them with subscripts.
Here is the correct order for writing chemical formulas :
1) Identify the elements in the compound.
2) Use the periodic table to find the symbols of elements in the compound.
3) Write the chemical symbols in the order shown in the name.
4) Use prefixes to determine the number of each type of atom in the compound.
5) Use subscripts to show the number of each type of atom in the compound.
Therefore, Following these steps will help you correctly write chemical formulas by identifying the elements, finding their symbols, arranging them in the correct order, determining the appropriate prefixes for the number of atoms, and representing them with subscripts.
To know more about the chemical formulas:
https://brainly.com/question/32018188
#SPJ4
A hiker walks 4.30 km east, turns 90.0º due south and walks an additional 2.48 km. What distance did the hiker travel? *
24.64 km
6.78 km
1.82 km
4.96 km
Answer:
6.78 km
Explanation:
Length of path due east = 4.3km
Length of path south = 2.48km
Unknown:
Distance covered = ?
Solution:
The distance covered is the total length of path from start to finish. It takes cognizance of the turns and every direction moved.
Unlike displacement which only considers the net direction from start to finish, distance sums up the total path.
So;
Distance = 4.3km + 2.48km = 6.78km
a car is moving at 2 m/s when it accelerates at 4 m/s^2 for 2 seconds. His new velocity is?
Answer:
10m/s
Explanation:
solution:
a= v-u / t
or,4= v-2 / 2
or,8= v-2
or,8+2= v
or,v = 10
SOS Physics
Projectile Simulator Lab
Answer:
i will try out give me some time to solve this
A 250 kg motorcycle starts at rest at a stoplight. When the light turns green the motorcycle accelerates to 20 m/s in 4 seconds. Calculate the force applied by the motorcycle if there is also 200 N of friction. Please show work. Any help would be appreciated
Laws of motion are important for the study of objects that are not in motion and objects in motion. Is it true or false?
Energy is always conserved. It cannot be created or destroyed. It can,
however be transferred from on form to another. Which of the following
is true of the relationship between kinetic and potential energy? *
A: When a system loses kinetic energy, It loses potential energy
B: as kinetic energy decreases, potential energy decreases
C: When a system gains kinetic energy, it loses potential energy
D: As kinetic energy increases, potential energy increases
Answer:
the answer is C
Explanation:
hope it helped!!!
Which of the following is a human connective tissue?
Muscle
Skin
Blood
None of the above
Please help, Thanks if you do!!! :)
Answer:
The Elements are arranged from left to right and top to bottom in order of increasing atomic number, and aslo
The arrangement of the periodic table was formulated in order to give a very informative representation of the chemical elements
Please help I don’t know how to do this
Answer:
2.2 m/sExplanation:
formula to be used is: a = ∆v/∆t
where:
a = 0.09 m/s²
∆t = 10 s
∆v = a*∆t
= (0.09 m/s²)(10 s)
= 0.9 m/s
Vivian's final speed:
= initial speed + change in speed
= 1.3 m/s + 0.9 m/s
= 2.2 m/s
A ball is thrown upwards which, which quantity remains constant among speed, kinetic energy, acceleration and velocity
Answer:
So uhh.... Acceleration means to accel or to go higher or like better. So not that one and velocity is speed too so, it has to be kinetic energy or something lke that.
Explanation:
A car is at velocity of 20 km/h. If the car traveled 120 km in 3 hours at constant acceleration, what is its final velocity?
what are the 3 sub particles of an atom
Answer:
Subatomic particles include electrons, the negatively charged, almost massless particles that nevertheless account for most of the size of the atom, and they include the heavier building blocks of the small but very dense nucleus of the atom, the positively charged protons and the electrically neutral neutrons.
Answer:
Neutron, Proton and Electron
Explanation:
The current in the wires of a circuit is 180.0 milliamps. If the resistance of the circuit were doubled ( with no change in voltage), then its new current would be
Answer:
I = 0.09[amp] or 90 [milliamps]
Explanation:
To solve this problem we must use ohm's law, which tells us that the voltage is equal to the product of the voltage by the current.
V = I*R
where:
V = voltage [V]
I = current [amp]
R = resistance [ohm]
Now, we replace the values of the first current into the equation
V = 180*10^-3 * R
V = 0.18*R (1)
Then we have that the resistance is doubled so we have this new equation:
V = I*(2R) (2)
The voltage remains constant therefore 1 and 2 are equals and we can obtain the current value.
V = V
0.18*R = I*2*R
I = 0.09[amp] or 90 [milliamps]
A 57 kg paratrooper falls through the air. How much force is pulling him down?
Answer:
Explanation:
Force = Mass * acceleration due to gravity.
Given
Mass of the paratrooper = 57kg
Acceleration due to gravity = 9.81m/s²
Required
Force pulling him down
Substitute unto formula;
F = 57 * 9.81
Force = 559.17 N
Hence the force pulling him down is 559.17N
The force pulling the paratrooper as he falls down is 558.6 N.
The given parameters;
mass of the paratrooper, m = 57 kgacceleration due to gravity, g = 9.8 m/s²The force pulling the paratrooper is force of gravity and the magnitude can be determined by applying Newton's second law of motion as shown below;
F = mg
F = 57 x 9.8
F = 558.6 N
Thus, the force pulling the paratrooper as he falls down is 558.6 N.
Learn more here:https://brainly.com/question/19887955
The gravitational constant G was first measured accurately by Henry Cavendish in 1798. He used an exquisitely sensitive balance to measure the force between two lead spheres whose centers were 0.27 m apart. One of the spheres had a mass of 188 kg, while the mass of the other sphere was 0.93 kg.
What was the ratio of the gravitational force between these spheres to the weight of the lighter sphere?
The gravitational force between the spheres is
[tex]F_{\rm g}=\dfrac{G(188\,\mathrm{kg})(0.93\,\mathrm{kg})}{(0.27\,\mathrm m)^2}\approx1.6\times10^{-7}\,\mathrm N[/tex]
where G = 6.674 x 10⁻¹¹ N m²/kg².
The weight of the lighter sphere is
[tex]F_{\rm w}=(0.93\,\mathrm{kg})g\approx9.1\,\mathrm N[/tex]
where g = 9.80 m/s².
The ratio between the two forces is then
[tex]\dfrac{F_{\rm g}}{F_{\rm w}}\approx1.8\times10^{-8}[/tex]
You are sitting still at a stoplight. The light turns green and you
accelerate to 35 m/s and it takes you 3.2 sec. What is your acceleration? *
Answer:
Your accleration would be 3.2 seconds because it takes you that long to reach 35 miles per hour.
Explanation:
I really hopes this helps.
Explain how hypothesis are related to theories
A hypothesis is a prediction made prior to conducting research. It is constructed in such a way that it can be tested to see if it is true. A theory is a principle developed to explain what has already been observed in data.
What is hypothesis?A hypothesis is an explanation proposed for a phenomenon. The scientific method requires that a hypothesis be testable in order for it to be considered a scientific hypothesis.
Scientists typically base scientific hypotheses on previous observations that cannot be adequately explained by existing scientific theories.
Theories are frequently used by scientists, researchers, and psychologists to guide their research and develop hypotheses.
A theory must be supported by evidence, whereas a hypothesis guides research and aids in the collection of evidence.
A theory is a tested, well-substantiated, unifying explanation for a set of verified, proven factors in science. A theory is always supported by evidence, whereas a hypothesis is only a possible outcome that can be tested and falsified.
Thus, this way one can concluded that the hypothesis and theories are related.
For more details regarding hypothesis, visit:
https://brainly.com/question/17173491
#SPJ2
what is the initial position
Answer:
Initial position of a body is the position of the body before accelerating or increasing its velocity the position changes and then that position is the final position.
hope it is helpful...
2. When our sun expands and cools, it will turn into a.
Answer:
Red giant star
Explanation:
5. Two buses X and Y started moving in opposite directions
from a point. After 5 minute Xcovered distance of 250mm
and y covered the distance of 300m. Calculate the relative
velocity.
Answer:
v = 0.166 [mm/min]
Explanation:
To solve this problem we must calculate the speed of each bus by means of the following formula that relates the displacement with time.
V = displacement / time
displacement = 250 [mm]
time = 5[min] = 300 [s]
Vx = 250/300 = 0.833[mm/min]
Vy = 300/300 = 1 [mm/min]
The relative velocity is the subtraction of the velocities, since the velocities are in opposite directions.
v = (1 - 0.833) = 0.166 [mm/min]
you describe a friend's position by including distance direction and what other term
Answer:
How would you describe where you are right now? You
might say that you are sitting one meter to the left of your
friend. You might explain that you are at home, which is two
houses north of your school.
Explanation:
Hope this helps!
Consider a pair of charged particles, particles 1 and 2, separated by a distance r. 6) Which options below are true? [Enter your answer as a string of the letter options you believe are correct. For instance, if you think options A, D, and E are correct, then enter "ADE"] A) Particle 2's electric field contributes to the electric force on particle 1. B) Particle 1's electric field does not contribute to the electric force on particle 1. C) If particle 2 were removed, there would still be a non-zero electric field at its location. D) If particle 2's distance from particle 1 is tripled, particle 1's electric field at 2's new location is no different than before since the field does not depend on the the properties of particle 2. E) None of the above
Answer:
A, B and C
Explanation:
Option A is correct because, the force on particle 1 depends on the electric field due to particle 2. Since the electric field due to particle 2 is the force per unit charge acting at the point of particle 1, the force at the point of particle 1 is the product of that electric field due to particle 2 and the charge on particle 1. So, Particle 2's electric field contributes to the electric force on particle 1.
Option B is correct because the force on a charge can only be exerted due to an external electric field. So, Particle 1's electric field does not contribute to the electric force on particle 1
Option C is correct since an electric field is always present in the region surrounding a charge irrespective of whether there is a charge in the region of the electric field or not. So, If particle 2 were removed, there would still be a non-zero electric field at its location.
The coefficient of friction for an object sliding across a rough floor is 0.7. A 125 N horizontal force causes the object to accelerate at 1.2 m/s2 . What is the objects weight
Answer:
152 N
Explanation:
From the question,
F-F' = ma................. Equation 1
Where F = Horizontal force, F' = Frictional force, m = mass of the object, a = accleration of the object.
But,
F' = mgμ............... Equation 2
Where g = acceleration due to gravity, μ = coefficient of friction.
make m the subject of the equation
Substitute equation 2 into equation 1
F-mgμ = ma.
make m the subject of the equation
m = F/(gμ+a).............. Equation 3
Given: F = 125 N, g = 9.8 m/s², μ = 0.7, a = 1.2 m/s²
Substitute these value into equation 3
m = 125/[(9.8×0.7)+1.2)
m = 125/8.06
m = 15.51 kg.
But,
W = mg.............. Equation 4
Where W = weight of the object.
W = 15.51(9.8)
W = 152 N
A binary star system that is detected from the drop in luminosity as one star passes in front of the other is called ___________. Group of answer choices
Answer:
eclipsing binary star system
Explanation:
The eclipsing timing method is one of the indirect methods Astronomers use to detect extrasolar planets. Eclipsing binary star system is detected from the drop in luminosity as one star passes in front of the other. The orbit plane of the two stars lies so nearly in the line, when viewed from Earth.
Thus, A binary star system that is detected from the drop in luminosity as one star passes in front of the other is called eclipsing binary star system.
What happens when light hits a transparent material like water or glass? What is
the phenomenon called?
HELP
