Answer:
A chlorinated swimming pool would be a homogenous mixture because chlorine and water diffuse through each other and cannot be separated out as distinct materials. It is impossible to separate the chlorine from water as they homogenously mix and cannot be separated into their pure forms.
Explanation:
A population’s exponential growth is the number of offspring produced over a given time period.True or false
A spring with a rest length of 0.7 m has a spring constant of 70 N/m. It is stretched and now has a length of 2.5 m. What is the potential energy stored in the spring?
____ J
Answer:
113.4 J
Explanation:
Elastic Potential Energy
Is the energy stored in an elastic material like a spring of constant k, in which case the energy is proportional to the square of the change of length Δx and the constant k.
[tex]\displaystyle PE = \frac{1}{2}k(\Delta x)^2[/tex]
The spring has a natural length of 0.7 m and a spring constant of k=70 N/m. When the spring is stretched to a length of 2.5 m, the change of length is
Δx = 2.5 m - 0.7 m = 1.8 m
The energy stored in the spring is:
[tex]\displaystyle PE = \frac{1}{2}70(1.8)^2[/tex]
PE = 113.4 J
A soccer player kicks a soccer ball (m = 0.42 kg) accelerating from rest to 32.5m/s in 0.21s. Determine the force that sends soccer ball towards the goal.
Plis I need Help:(
Answer:
F=65 N
Explanation:
Uniform Acceleration
When an object changes its velocity at the same rate, the acceleration is constant.
The relation between the initial and final speeds is:
[tex]v_f=v_o+a.t[/tex]
Solving for a:
[tex]\displaystyle a=\frac{v_f-v_o}{t}[/tex]
Where:
vf = Final speed
vo = Initial speed
a = Constant acceleration
t = Elapsed time
The ball is kicked from rest vo=0 to vf=32.5 m/s in t=0.21 s. Computing the acceleration:
[tex]\displaystyle a=\frac{32.5-0}{0.21}[/tex]
[tex]a=154.8\ m/s^2[/tex]
Note: We have shown this result rounded to the nearest tenth, but we kept all the decimals in a scientific calculator for further calculations.
The force needed to accelerate the soccer ball is calculated by:
F = ma
The ball has a mass of m=0.42 kg, thus:
F=0.42*154.8
F=65 N
As mentioned, this result can only be obtained by keeping full precision in the above calculations.
A soccer player kicks a soccer ball (m = 0.42 kg) accelerating from rest to 32.5m/s in 0.21s. Determine the force that sends soccer ball towards the goal.
Help:(
Answer:
65 N
Explanation:
m = Mass of ball = 0.42 kg
u = Initial velocity = 0
v = Final velocity = 32.5 m/s
a = Acceleration = [tex]\dfrac{v-u}{t}[/tex]
t = Time = 0.21 s
Force is given by
[tex]F=ma[/tex]
[tex]\Rightarrow F=m\dfrac{v-u}{t}[/tex]
[tex]\Rightarrow F=0.42\times \dfrac{32.5-0}{0.21}[/tex]
[tex]\Rightarrow F=65\ \text{N}[/tex]
The force that sends soccer ball towards the goal is 65 N.
A woman lives on the eighth floor of an apartment building. She works in a high-rise office building 6.5 blocks away from her apartment on the same street. Her office is on the 14th floor. Assume each story of her apartment building is 4.0 m, each story of her office building is 5.5 m, and a block is 146.6 m long.
Required:
a. Sketch her path.
b. Estimate the distance she travels to work.
c. Find the magnitude of her displacement.
Answer:
b) d = 997.9 m , c) D = (952.9 i ^ +45 k ^) m , D = 953.6 m and θ = 2.7º
Explanation:
In this exercise we must add the distance traveled, remembering that the displacement is a vector and the distance a scalar.
a) The displacement scheme is the woman walks in her building A to descend to the lower floor 4.0 m, we assume that this includes the vertical displacement, until reaching the street level, the displacement is vertical in this part.
Being on the street, she travels the 6.5 blocks to reach the building where she works, they indicate that each block is 146.6 m, this movement is horizontal.
Upon reaching building B, she goes up to his office on the 14th floor where she travels 5.5m on each floor, it is assumed that the distance to go up to the upper floor is included, this displacement is vertical
b and c) Let's find the distance traveled and the displacement
in building A
Zₐ = 8 * 4.0
Zₐ = -32.0 m k ^
the vector k ^ indicates that the displacement is vertical and the negative sign that it is descending
on the street
[tex]X_{ab}[/tex] = 6.5 146.6
X_{ab} = 952.9 m i ^
the vector i ^ indicates that the displacement is the x-axis, we assume that the axis is in the direction of the displacement
in building B
[tex]Z_{b}[/tex] = 14 * 5.5
Z_{b} = 77 m k ^
displacement in the vertical axis and in the positive direction
now we calculate the distance traveled,
d = Zₐ + X_{ab} + Z_{b}
d = -32 + 952.9 + 77
d = 997.9 m
note that this value is a scalar
Let's calculate the displacement,
Z axis
[tex]Z_{total}[/tex] = Zₐ + Z_{b}
Z_{total} = -32 + 77
Z_{total} = 45 m k ^
X axis
X_{total} = X_{ab}
X_{total} = 952.9 m i ^
we can give the result in two ways
a) D = X_total i ^ + Z_total k ^
D = (952.9 i ^ +45 k ^) m
b) in module form and angles
Let's use the Pythagorean theorem
D² = [tex]X_{total}^2[/tex] + [tex]Z_{total}^2[/tex]
D = √(952.9² + 45²)
D = 953.6 m
We use trigonometry
tan θ = Z / X
θ = tan⁻¹ (Z / X)
θ = tan⁻¹ (45 / 952.9)
θ = 2.7º
this angle is measured from the positive side of the x axis towards the z axis
hii Happy New year can you all please answer this
Answer:
truuuuuuuuuuuuueeeeeeeee
3.7. A dog searching for a bone walks 3.50 m south, then 8.20 m at an angle 23.1 degrees north of east, and finally 15.0 m west. (a) What is the magnitude of the dog’s total displacement? (b) What is the direction of the dog’s total displacement where directly east is taken as zero degrees and counter-clockwise is positive?
Answer:
Explanation:
We shall represent displacement of dog in vector form , in terms of i , j , i representing east and j representing north .
Dog travels 3.5 m south .
Displacement D₁ = - 3.5 j
then dog travels 8.2 m , 23.1 degree north of east
Displacement D₂ = 8.2 cos23.1 i + 8.2 sin23 j
D₂ = 8.2 cos23.1 i + 8.2 sin23.1 j
= 7.54 i + 3.22 j
Third displacement
D₃ = - 15i
Total displacement = D₁ + D₂ + D₃
= - 3.5 j + 7.54 i + 3.22 j -15i
= - 7.46 i - 0.28 j
Magnitude of displacement = √ ( 7.46² + .28²)
= √(55.65 + .08 )
= 7.46 m
b ) Direction of displacement
If Ф be angle , displacement makes with west direction
TanФ = .08 / 55.65 = .00143
Ф = .082 degree south of west or almost west .
From east , this angle = 180 + .082 = 180.082 , counterclockwise .
What's the effect of mass and speed on kinetic energy
Answer:
The relationship between Kinetic energy, mass and speed indicates that kinetic energy and mass are proportional. This proportionality implies that if the mass is doubled, its kinetic energy is doubled too. More generally, if two objects move with the same speed the most massive one has the higher kinetic energy
Explanation:
Which is not part of a DC motor?
Answer:
The correct answer to the question will be compass i.e compass is not a part of a DC motor. Various parts of a DC motor are coil of wire, armature, field magnets, brushes and commutator. The coil of wire plays a vital role in DC motor.
Explanation:
A roller coaster car accelerates uniformly covers a distance of 50 m while increasing its speed
from 5.0 m/s to 25 m/s. How long does it take for this to occur? What is its average velocity over
this distance? (3.3 s. 15 m/s)
Proof please
Answer:
Explanation:
Given parameters:
Distance covered = 50m
Initial velocity = 5m/s
Final velocity = 25m/s
Unknown:
Time taken to cover the distance = ?
Average velocity = ?
Solution:
To solve this problem, we use the expression below:
x = [tex](\frac{v + u}{2}) t[/tex]
x is the distance
v is the final velocity
u is the initial velocity
t is the time
50 = [tex]\frac{5 + 25}{2}[/tex] x t
50 = 15 x t
t = 3.3s
Average velocity = [tex]\frac{v + u}{2}[/tex] = [tex]\frac{5+25}{2}[/tex] = 15m/s
A tow truck applies a force of 2600 N on a 2100 Kg car for a period of 9 seconds. What is the magnitude of the change in the car’s momentum?
Answer:
P = 23400 [kg*m/s]
Explanation:
Momentum is defined as the product of force by the time of force duration. It can be determined by means of the following equation.
[tex]P=F*t[/tex]
where:
P = momentum [kg*m/s]
F = force = 2600 [N]
t = time = 9 [s]
Now replacing:
[tex]P=2600*9\\P=23400 [kg*m/s][/tex]
Egg A is dropped from a height of 1m onto the floor. Egg B is dropped from a height of 1m into a bucket of water. Which statement
correctly describes why Egg B does not break?
Answer:
maybe it's because a bucket of water has more density than egg B
Answer:
Egg B experiences less force over a shorter time
Explanation:
I throw a thin uniform circular disc (think of a frisbee) into the air so that it spins with angular velocity ω about an axis which makes an angle α with the axis of the disc. Show that the magnitude of ω is constant.
Answer:
| w | = w√ ( sin^2 ∝ + cos^2∝ ) shows that w is independent of time hence it is constant
Explanation:
prove that the magnitude of w is constant
attached below is a detailed solution of the question
A ray of light is incident from air into diamond at the surface with an angle of 70 degree. what is the angle it makes in the diamond if the refraction index of diamond is 2.42.
Answer: Angle is 18.66°
Explanation: When an incident light passes through two different media, the ray of light is refracted. Refraction is the bending of the light that happens when the wave changes its velocity while passing through a different surface.
The incident light makes an angle with the normal to the surface at a point. This angle is called Angle of Incidence. After going through the other medium, the wave makes a different angle with the normal. That angle is called Angle of Refraction.
Light changes velocity when passing through different media because each material has different index of refraction. For air, index of refraction is n = 1.
The incident angle, the refracted angle and index of refraction is related by the following formula, known as Snell's Law:
[tex]n_{1}sin\theta_{1}=n_{2}sin\theta_{2}[/tex]
where
n₁ is index of refraction of the incident medium
θ₁ is angle of incidence
n₂ is index of refration of the refracted medium
θ₂ is angle of refraction
For the ray of light incident from air into a diamond, the angle of refraction is
[tex]sin\theta_{2}=\frac{n_{1}sin\theta_{1}}{n_{2}}[/tex]
[tex]sin\theta_{2}=\frac{1*sin70}{2.42}[/tex]
[tex]sin\theta_{2}=0.32[/tex]
[tex]\theta_{2}=arcsin 0.32[/tex]
[tex]\theta_{2}=[/tex] 18.66
The angle light makes in the diamond is 18.66°.
6. Balsa wood with an average density of 130 kg/m3 is floating in pure water. What percentage of the wood is submerged
Answer:
The percentage of the submerged wood is 13%.
Explanation:
Given;
density of the Balsa wood, [tex]\rho _{wood}[/tex] = 130 kg/m³
density of pure water, [tex]\rho_{water}[/tex] = 1000 kg/m³
The percentage of the submerged wood is calculated as;
[tex]Percentage \ of \ submerged \ wood = \frac{130 \ kg/m^3}{1000 \ kg/m^3} \ \times \ 100 \% \\\\Percentage \ of \ submerged \ wood = 13 \ \%[/tex]
Therefore, the percentage of the submerged wood is 13%.
What is buoyancy? How is it related to the force of gravity?
Answer:
buoyancy is the ability to float on water or other liquids. this relates to the force of gravity because the stronger that force, the more likely it is to sink.
Explanation:
A force of 6.7 N acts on a 30 kg body initially at rest. Compute the work done by the force in (a) the first, (b) the second, and (c) the third seconds and (d) the instantaneous power due to the force at the end of the third second.
Answer:
(a) 0.748 J
(b) 2.245 J
(c) 3.74 J
(d) 4.482 W
Explanation:
(a) Work done W = Force × distance
W = F×d,
Where d = 1/2(at²)
Therefore,
W =1/2(F×at²)................ Equation 1
Where a = acceleration, t = time.
But,
a = F/m...................... Equation 2
Where m = mass.
Substitute equation 1 into equation 2
W = 1/2(F²t²/m)................. Equation 3
Given: F = 6.7 N, t = 1 s, m = 30 kg
Substitute into equation 3
W₁ = 1/2(6.7²×1²/30)
W = 0.748 J.
(b) Similarly,
The work done in the second seconds is
Where t₂ = 2 s
W₂ = 1/2(F²t₂²/m)- W₁
W = 1/2(6.7²×2²/30)-0.748
W = 2.245 J
(c) The work done in the third seconds is
Where t₃ = 3 s
W₃ = 1/2(F²t₃²/m)-(W₂+W₃)
W = 1/2(6.7²×3²/30)-(2.993)
W = 3.74 J.
(d) P = Fv ............... Equation 4
Where v = velocity.
and,
v = at..................... Equation 5
Substitute equation 5 into equation 4
P = Fat................... Equation 6
Given: F = 6.7 N, a = 6.7/30 = 0.223 m/s², t = 3 s
Substitute into equation 6
P = 6.7×0.223×3
P = 4.482 W.
Can a golf ball bounce like a rubber ball? Due in 1 hour. 15 points.
Answer:
So, I tested it out and came to a conclusion.
The rubber ball is quite bouncy due to the fact that it is made of rubber which is what makes it bounce back and high, but although the golfball does in fact bounce back it does not bounce as high as the rubber ball due to the fact that it is made of plastic.
Explanation:
Hope this helps you out!
A man rides a bicycle that is connected to an electrical generator. If he rides as hard as he can, his body can produce a mechanical power of 500 W, but the generator is only 40% efficient at converting mechanical energy into electrical energy.How many 100 W incandescent light bulbs can he power
Answer: the man can power 2 incandescent light bulbs
Explanation:
Given that;
power produced by the body while riding = 500 W
Efficiency of generator = 40% = 0.4
First we need to convert the mechanical energy to electric energy;
which efficiency of generator multiply by power input, so
⇒ 0.4 × 500 = 200 W
Now, if 1 incandescent light bulbs is 100 W
x incandescent light bulbs bulbs is 200 W
100x W= 200 W
x = 200 W / 100 W
x = 2
Therefore, the man can power 2 incandescent light bulbs
A steady-state temperature difference of 85 K is impressed across a fiberglass layer of 13 cm thickness. The thermal conductivity of the fiberglass is 0.035 W/m K. Compute the heat transferred through the material per hour per meter squared.
Answer:
21.54W/m²
Explanation:
Heat transferred through the material is expressed as;
Q =K∆T/∆x
Given
Thermal conductivity k = 0.035W/mK
∆T is the change in temperature = 80K
∆x is the thickness = 13cm = 0.13m
Substitute the given values into the formula
Q = 0.035(80)/0.13
Q = 2.8/0.13
Q = 21.54W/m²
Hence the heat transferred through the material is 21.54W/m²
An object moving in simple harmonic motion has an amplitude of 0.02m and a maximum acceleration of 40m/s2 . what is the frequency of the system (in Hz)
Answer:
f = 7.11 Hz
Explanation:
Given that,
The amplitude of object in SHM, A = 0.02 m
The maximum acceleration of the object, a = 40 m/s²
We need to find the frequency of the system.
The maximum acceleration of the object in SHM is given by :
[tex]a=\omega ^2 A[/tex]
Where [tex]\omega[/tex] is angular frequency
[tex]\omega^2=\dfrac{a}{A}\\\\\omega=\sqrt{\dfrac{a}{A}} \\\\=\sqrt{\dfrac{40}{0.02}} \\\\\omega=44.721\ rad/s[/tex]
We know that,
[tex]f=\dfrac{\omega}{2\pi}\\\\f=\dfrac{44.721}{2\pi}\\\\f=7.11\ Hz[/tex]
So, the frequency of the system is 7.11 Hz.
what is mechanics physics
The energy lost during transformation is always in the form of:
chemical
heat
sunlight
mechanical
Answer:
heat
answer already there but yea just for da points
The rate of change of work with respect to time is called
1) power
2) momentum
3) energy
4)force
Answer:
Power
Explanation:
Power, by definition, is the rate of doing work (aka, work with respect to time).
PLEASE ANSWER ASAP BEFORE MY TEACHER AND MY MOM KILLES ME PLEASE ASAP
The first person with the right answer gets to be a brainlest
In the attachment there is a density column where there is colour
Question: tell me why is the red at the bottom of the density column if it is the least dense
Answer:
because it’s on the bottom, and to get to that part of it, think of it like that scene from moana when they go down into the realm of monsters they go through the thick parts to get to the thin parts, soo the cube wouldn’t be nearly able to reach that level
Explanation:
Answer:
the red at the bottom should not count, but the red at the top is the least dense because it floats upon the other liquids
Explanation:
hope this helps
Explain why this is synthesis reaction
Answer:
This is a synthesis reaction because two substances react to produce one substance.
Explanation:
Got it straight off plato.
Answer:
This is a synthesis reaction because two substances react to produce one substance.
Explanation:
who was the first president of America
Answer:George Washington
Explanation:On April 30, 1789, George Washington, standing on the balcony of Federal Hall on Wall Street in New York, took his oath of office as the first President of the United States.
Answer:
George Washington
Explanation:
Hope this helps out
A 2 kg toy car moves at a speed of 5 m/s.? If a child applies a 3 N force for 2 m in the same direction the car is already moving, how much work isdone on the car?
Answer:
its A
Explanation:
avocados from Mexico avocados from Mexico avocados from Mexico avocados from Mexico avocados from Mexico avocados from Mexico avocados from Mexico avocados from Mexico avocados from Mexico avocados from Mexico avocados from Mexico avocados from Mexico avocados from Mexico avocados from Mexico avocados from Mexico avocados from Mexico avocados from Mexico avocados from Mexico avocados from Mexico avocados from Mexico avocados from Mexico avocados from Mexico avocados from Mexico.
Calculate the momentum of a 1,500 kg car traveling at 6 m/s.
A military airplane sometimes needs to refuel in mid-air, and another plane flies above it to add the fuel. If a plane with a mass of 7,800 kg is traveling with a velocity of 30 m/s and refuels by adding an additional 800 kg of jet fuel, what will its new velocity be? (Hint: This is a multi-step problem).
Answer:
See the answers below.
Explanation:
Momentum is defined as the product of mass by velocity, in this way we have the following equation.
[tex]P=m*v[/tex]
where:
P = momemtum [kg*m/s]
m = mass = 1500 [kg]
v = velocity = 6 [m/s]
[tex]P = 1500*6\\P=9000 [kg*m/s][/tex]
Now we have to calculate the momentum of the plane when it travels at 30 [m/s].
[tex]P_{airplane}=m_{plane}*v_{plane}\\P_{airplane}=7800*30\\P_{airplane}=234000[kg*m/s][/tex]
Now this same momentum must be conserved, in such a way that the mass is increased but the velocity must decrease for the momentum to be conserved.
[tex]P=m_{new}*v_{new}\\234000=(7800+800)*v_{new}\\234000=8600*v_{new}\\v_{new}=27.2[m/s][/tex]
Answer:
1. 9000 kg-m/s
2. 27.2 m/s
4. True or False. Improving your muscular endurance can improve your
power *
Answer:
it's true
Explanation:
A strong body allows you to perform movements and activities that require power without getting tired.
