a. the mole of substance
b.a standard solution
in analytical chemistry standard solution is a solution containing a precisely known concentration of an element or a substance.
A known mass of solute is dissolved to make a specific volume. it is prepared using a standard solution,such as a primary standard.
hope this helps you
Which term describes the molecule shown below?
H H
C=C
H
H
O A. Saturated alkene
O B. Unsaturated alkane
O C. Unsaturated alkene
O D. Saturated alkane
Answer:
The answer is C
Explanation:
unsaturated hydrocarbons have multiple carbon bonds
Unsaturated alkene describes the molecule shown below as the atoms are attached by double bonds.
An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether it is solid,liquid , gas consists of atoms . Each atom has a nucleus which is contains protons and neutrons and shells in which the electrons revolve.
The protons are positively charged particles and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged particles and hence the atom as a whole is neutral particle and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not change the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/30898688
#SPJ7
Equation for the hydrolysis of glyceryl triethanoate.
The equation for the hydrolysis of glyceryl triethanoate is C3H5(OH)3 + 3CH3COOH = C3H3(OCOCH3)3 + HOCH2CH(OH)CH2OH
What is Hydrolysis?Hydrolysis is a chemical reaction which water molecule break down one or more chemical bonds. This is use for substitution, elimination, and solubility.
Hydrolysis depend on the pH, solubility and chemical constituent of the substance.
Therefore, The equation for the hydrolysis of glyceryl triethanoate is C3H5(OH)3 + 3CH3COOH = C3H3(OCOCH3)3 + HOCH2CH(OH)CH2OH
Learn more about Hydrolysis below.
https://brainly.com/question/1403345
Flame __________ __________ is an instrumental method of analysing metal ions in solutions. What are the 2 missing words in this sentence?
Answer:
emission spectroscope
Explanation:
The flame emission spectroscope is a scientific instrument based on flame testing.
How does a noncompetitive inhibitor decrease the rate of an enzyme-catalyzed reaction?.
Answer:
In fact, the inhibitor and substrate don't affect one another's binding to the enzyme at all. However, when the inhibitor is bound, the enzyme cannot catalyze its reaction to produce a product. Thus, noncompetitive inhibition acts by reducing the number of functional enzyme molecules that can carry out a reaction.
c) Which one of the following compounds will react with perrhenic acid? Tick one box.
ethane
hydrochloric acid
potassium carbonate
sodium chloride
Answer:
I believe is the correct answer
Explanation:
hydrochloric
which phrase explains the apparent motions of planets in the night sky?
The east to west daily motions of stars, planets, the Moon, and the Sun are caused by the rotation of the Earth on its axis. The Earth and all the planets revolve around the Sun on circular orbits. This produces the change in constellations observed from one time of year to the next.
hope it helps..!!!
NO LINKS PLEASE! Why does dye dropped into a cup of water eventually spread throughout the water?
A. The water has lattice vectors.
B. The water undergoes a phase transition.
C. The water particles and dye particles exhibit Brownian motion.
D. The water exerts pressure on the container.
Answer:
C
Explanation:
okay, you need to look at the structures of the particles of matter in the solid, liquid and gas.
particles in a solid are in fixed positions, where they can only vibrate in those positions ( take a look at ice, or rather, a brick)liquids have very small or rather, no spaces between them, but they can slide or rub against each other, like people in a really tight crowd I guessgas particles have very large spaces between them and they move randomly. these exibit what's called brownian motion.since water particles (and all other liquid particles) have negligible spacings and limited movement, that allows the dye particles to move from a region of high concentration to that of a low concentration. the aim for this is for the mixture/solution to reach an equilibrium, that is the mixture must get to a point where all regions have the same concentration of the dye.you can refer to your coursebooks :)
correct where wrong please:)
How does pathogen infection result in the occurrence of fevers in a host?
Edema caused by the pathogen raises the body temperature..
The pathogens break down the host's hypothalmus..
Pyrogens produced by the pathogen alter the host thermostat.
The interaction between PAMPs and PRPs causes a respiratory burst.
Answer:
The answer is Edema caused by the pathogen raises the body temperature. :)
Have an amazing day!!!
Please rate and mark brainliest!!
during lanslides rock and soil are?
Answer:
Getting carried down a moutain side or a cliff and they are relocated.
Explanation:
Glaciers are responsible for moving rocks from one place to another
I will mark brainlist
If the colored spheres represent different solute particles, based on the principles of osmosis, in which overall direction is water (not pictured) most likely to move?
A.
Water will move into the cell.
B.
Water will not move into or out of the cell.
C.
Water will move into and out of the cell equally.
D.
Water will move out of the cell.
Water will move into the cell because of lower concentration of water inside the cell as compared to outside.
Why water moves inside or outside of the cell?Water has a tendency to move across a membrane from a lower osmolarity to a higher osmolarity which means from higher concentration region to the lower concentrated region.
So we can conclude that water will move into the cell due to lower concentration of water inside the cell as compared to outside.
Learn more about cell here: https://brainly.com/question/13123319
Answer:
If you're from study island, the answer is D. Water will move out of the cell.
Explanation:
I got it on study island and this was right.
complete and balance the following equation b. na2 co3
the question isnt clear where are the products ir the reactants like __ = ___ + ___
If you have a closed container that has a pressure of 2.35atm, and a volume of 1.2L, and contains 76.33g Cl2, what is the resulting temperature in K
The resulting temperature of a closed container that has a pressure of 2.35atm, and a volume of 1.2L, and contains 76.33g Cl2 is 31.8K.
How to calculate temperature?The temperature of a given gas can be calculated by using the ideal gas law equation:
PV = nRT
Where;
P = pressure V = volume n = number of molesR = gas law constantT = temperatureno of moles of Cl2 = 76.33g ÷ 70.91g/mol = 1.08mol
2.35 × 1.2 = 1.08 × 0.0821 × T
2.82 = 0.088T
T = 2.82/0.088
T = 31.8K
Therefore, the resulting temperature of a closed container that has a pressure of 2.35atm, and a volume of 1.2L, and contains 76.33g Cl2 is 31.8K.
Learn more about temperature at: https://brainly.com/question/11464844
6. Cu + FeSO4
single replacement
Answer:
CuSO4 + Fe
Explanation:
this is because Cu will displace Fe from it's position
Solid calcium carbonate reacts with hydrochloric acid, forming aqueous calcium chloride, carbon dioxide
gas, liquid water
help balance
Answer:
When hydrochloric acid comes into contact with calcium carbonate, the following chemical reaction ensues: CaCO3 + 2HCl → CaCl + CO2 + H2O, which provides acid neutralization alongside the formation of byproducts
Answer:
C) liquid
Explanation:
edge 2023
What part of defense would likely be affected if the pathogen contained a mutation in it's pathogen-associated molecular patterns (PAMPs)?
the pathogen would secrete greater amounts of toxins...
the pathogen would not be able to penetrate the host's physical barriers.
the pathogen might not be recognized by the host.
the pathogen would be easily recognized by the host's TLRs.
Answer:
The pathogen might not be recodnised by the host :)
Here is a link to learn more!!
https://brainly.com/question/13859016
Have an amazing day!!
Please rate and mark brainliest!!
At the wavelengths included in Study 1, as the
wavelength of light increases, the reflectance of
Cyanide:
A.
increases only.
B.
decreases only.
C.
increases, then decreases.
D.
decreases, then increases.
Based on the research in Study 1, as the wavelength of light increases, the reflectance of Cyanide: C. increases, then decreases.
What is wavelength?Wavelength is simply defined as the distance (in meters) between two (2) successive crests or troughs of a wave. Thus, wavelength refers to the horizontal distance between two adjacent crests or troughs of a wave.
Generally, there is a linear relationship between the wavelength of light and reflectance. Thus, as the wavelength of light increases, the reflectance of Cyanide in Study 1 increases, before it then decreases.
Find more information on wavelength here: brainly.com/question/23460034
Helpppppppppppppppppp
Answer:
Ch4-Methane ( 5 atoms )
CO2- Carbon Dioxide ( 3 atoms )
H2O- Water ( 3 atoms )
2O2- Oxygen ( 2 atoms )
How long would it take for a sound impulse to travel through an aluminum rod 1,500 meters long?
0.45 sec
4.5 sec
3.4 sec
0.29 sec
Answer:
As per Provided Information
Distance travelled by sound impulse through an aluminium rod is 1500 metres .
We have been asked to determine the time taken by the sound impulse to travel through aluminium rod .
As we know
Speed of sound in aluminium rod is 5100m/s .
Using Formulae
[tex] \boxed{\bf \: Time \: taken_{(Sound \: impulse)} = \cfrac{distance \: travelled \: by \: sound \: impulse}{speed \: of \: sound \: impluse}}[/tex]
Substituting the value and we obtain
[tex] \sf \qquad \longrightarrow \: Time \: taken_{(Sound \: impulse)} = \dfrac{1500}{5100} \\ \\ \\ \sf \qquad \longrightarrow \: Time \: taken_{(Sound \: impulse)} = \cancel\dfrac{1500}{5100} \\ \\ \\ \sf \qquad \longrightarrow \: Time \: taken_{(Sound \: impulse)} = 0.29 \: s[/tex]
Therefore ,
0.29 second sound impulse takes to travelled.So, your answer is 0.29 s .
Why do chemist prefer to use kipp’s apparatus for the production of hydrogen sulphide instead of woulf’s bottle??
Chemist prefer to use kipp’s apparatus for the production of hydrogen sulphide instead of woulf’s bottle because they produce gas without generating heat.
What is kipp's appratus & woulf's bottle?Kipp's appratus and woulf's bottle both are the laborartory appratus and used in the analytical process of any reactions.
Hydrogen sulphide gas will be produced in the laborartory by using both given appratus but we prefer the use of kipp's apparatus because in this apparatus small amount of gas is produced in the controlled heat condition by the reaction between the liquid sulphuric acid and solid iron sulphide.
Hence we prefer kipp's appratus as it produces gas without heat.
To know more about kipp's appratus, visit the below link:
https://brainly.com/question/14140471
#SPJ1
The major product of the given reaction has the molecular formula c10h16o3. Draw its structure in the most stable tautomeric form.
Tautomers are isomers composed of the same atoms but with different electronic and molecular structures. The most stable tautomeric form is attached.
What is tautomery?
Tautomery is a special case of isomery produced by the change in the position of one or more atoms in the molecule. This change in position modifies the molecular electronic distribution, and hence, the molecular structure.
In solution, isomeres called tautomers are in equilibrium, and the constant interconversion is called tautomerization. Both molecules have the same type and quantity of atoms.
In the proposed example, the product has the molecular formula C₁₀H₁₆O₃. Isomeric molecules must have 6C, 16H, and 3O. However, the distribution of these atoms varies, leading to a change in the product molecule structure.
In the attached files you will find an example. You should check if this is the same example as yours.
You can learn more about tautomeric forms at
https://brainly.com/question/13776462
https://brainly.com/question/6344293
https://brainly.com/question/15411301
https://brainly.com/question/25880668
Predict the sign of delta H for water condensing. Is this reaction spontaneous?
A) + and spontaneous
B) - and uncertain
C) + and uncertain
D) - and spontaneous
Answer:
A + and spontqneous
Explanation:
i hope this helps.
The enthalpy change of condensation of water is negative and here the entropy change also negative and the process is nonspontaneous.
What is enthalpy change?The enthalpy change of a reaction or a phase change is the change in heat energy absorbed or evolved. The change in enthalpy is dependant on the nature of process as well on temperature of the system.
Condensation of water is the change of its liquid state into solid state. Thus water freezes to form ice. In this process, the system is getting more ordered structure in the solid state and thus, the entropy of the system decreases means the entropy change is negative.
Now, when converting liquid to solid heat is released by the system. Hence, enthalpy change, delta H is negative. A process becomes spontaneous only f its Gibbs energy is negative.
Here we have both negative entropy and enthalpy so make Gibbs energy negative higher temperature is needed.
Condensation of a substances is taking place at very low temperature and thus gibbs energy become positive. Therefore the process is nonspontaneous.
To find more about enthalpy change, refer the link below:
https://brainly.com/question/4526346
#SPJ2
Calculate the concentration of solution containing :
a. 0.2 mole of sodium hydroxide, NaOH, dissolved in water and made up to 100 cm3.
b. 9.8 grams od sulfuric acid, HF, dissolved in water and made up to 500 cm3.
Answer:
the answer for a is 2mol/dm3
Explanation:
n=0.2mol of NaOH
v=100cm3
[tex]v = \frac{100}{1000} \\ v = 0.1 {dm}^{3} \\ concentration = \frac{n}{v} \\ = \frac{0.2}{0.1} \\ = 2mol {dm}^{3} [/tex]
Predict: How do you think you could use the Gizmo to make the color gray? _____________
_________________________________________________________________________
Observe: Change the Red, Green, and Blue values to 90. What color does this produce?
_________________________________________________________________________
Grey basically is formed by combining black and white colors together.
In this case, one would have to explore other options.
What kind of colors will form grey?The following color combinations can form grey:
By adjusting the other colors, variations of hue will be observed. It is to be noted that the Gizmo is unaccessible on this platform hence the general answer.
Read more about colors at:
https://brainly.com/question/4431200
Explain in complete sentences why
how the oceans are fundamental to all life on Earth
Answer:
The oceans are the very foundation of human life. life itself arose from the oceans. The oceans are vast, covering about 140 million square miles, some covering 72 percent of the earth's surface.
Explanation:
i need help balancing the equation and number 4
Explanation:
I hope this helps answer your questions
(Science)
(Quarter 4)
Solve the puzzle game's to have 5 point's
(BEGIN)
( •O•)!?
| |
| |
| |______|________
|________|_____ |
| |
(FINISH)
(real question)
can you know why Sam is nosebleeding
_ ~
(> ㅍuㅍ)>
Explanation:
because of blood pressure
what are the products for the following equation?
NaCl + H2O ->
Answer:
NaOH + HCI
Explanation:
yesssssssssssss
Giving brainiest and 55 points!
Answer:
C
Explanation:
Hot and humid weather, accompanied by thunderstorms, is generally due to maritime tropical air massoriginate in the tropical oceans of both the hemispherescharacterized by high temperatures and are rich in moisture contentair mass during winter moves towards the land areas in the form of wind breeze affecting placesexperiences hot and humid weather during the summer seasonhelp! this is science, Palmas is closer to the equator than Neuquén. Which location has a warmer air temperature and why?
Answer:
Palmas, because more energy is transferred from the sun directly to the surface and then from the surface to the air.
Explanation:
Hope this helps:)....if not then sorry for wasting your time and may God bless you:)
Denatured alcohol vs isopropyl alcohol for cleaning.
Denatured alcohol and isopropyl alcohol are as similar as they as different. They are both used for cleaning and harmful to people if ingested. But isopropyl seems to be more effective than denatured alcohol. Denatured alcohol has been found to be more toxic and can harm our skin. But when it comes to cleaning, denatured alcohol can be used, but should not be used over isopropyl as it can leave behind residue, especially when it comes to electronic devices. Isopropyl, especially 70%, is more effective because it has more water, which can help it dissolve more slowly, penetrate cells, and kill bacteria.