Answer:
Frequencia = 1.25 Hz
Explanation:
Dados los siguientes datos;
Velocidad = 50 m/s Longitud de onda = 40 metrosPara encontrar la frecuencia de la onda;
Matemáticamente, la velocidad de una onda viene dada por la fórmula;
[tex] Velocidad = Longitud \; de \; onda * Frequencia [/tex]
Haciendo de la frecuencia el tema de la fórmula, tenemos;
[tex] Frequencia = \frac {Velocidad}{Longitud \; de \; onda} [/tex]
Sustituyendo en la fórmula, tenemos;
[tex] Frequencia = \frac {50}{40} [/tex]
Frequencia = 1.25 Hz
Explain how a submarine
floats on the water surface
and dives down into water.
Answer:
A submarine uses tanks that are filled with compressed air and when it is needed the air is released and takes on water which increase the density making it sink but when the water is pushed out the sub marine density is decreased making it float
How is the potential difference same in capacitors arranged in parallel combination?
Answer:
Potential difference across capacitors in parallelTwo or more capacitors are said to be connected in parallel if each one of them is connected across the same two points. In a parallel combination of capacitors potential difference across each capacitor is same but each capacitor will store different charge.
(6). A car travels in a straight line from city A to city B at a speed of 60kmh-1
. Then return
from city B to city A along the original route at a speed of 40kmh-1
. The distance between
the two cities is 120 km. What is the average speed of the vehicle?
1. 30kmh-1
2. 45kmh-1
3. 48kmh-1
4. 60kmh-1
The hair dryer has a plastic case so there is no need for an earth wire connection in the plug ,explain why the hair dryer is still safe to use.
Answer:
plastics are unable to conduct electricity and heat due to there being no free flowing electrons, meaning they are safe to use.
Explanation:
Which two statements are true about a system?
a)A system is a group of objects analyzed as one unit.
b)Energy that moves across system boundaries is conserved.
c)There’s only one way to define the boundaries of a system.
d)All systems are made by humans.
Highlight 2 factors which shows that heat from the sun does reach the earth surface by convection
the force between the earth and the body which is at a distance r from the center of the earth is F. What must be this distance for the force to be doubled.
Answer:
Explanation:
The gravitational force between the earth and another body is F = -GM_em/r^2 r where G = 6.67 times 10^-11 Nm^2/kg^2 is the gravitational constant, M_e = 5.97 times 10^24 kg is the mass of the earth, m is the mass of the other body, and r is the position vector of the second body with respect to the centre of the earth.
10. Match the following varibles to their relationship in Newton's 2nd Law. Questions 1. Force and Acceleration 2. Mass and Acceleration 3. Speed and Distance Answer Choices A. Direct Relationship B. Inverse Relationship C. Not in Newton's 2nd Law
Explanation:
based on the above information
1.A
2.B
3. C
a skydiver of mass 80kg jumpes from a plane. Taking g=m/s^2 write down the weight of skydiver
Answer:
800N
Explanation:
as we know that
weight = mass × acceleration due to gravity
= 80kg × 10 m/s^2
= 800N.
A 15.0 cm object is 12.0 cm from a convex mirror that has a focal length of -6.0 cm. What is the height of the image produced by the mirror?
• -5.0 cm
• 7.5 cm
• -7.5 cm
• 5.0 cm
Answer:
5.0cm
Explanation:
To get the height of the image, we will use the magnification formula as shown:
m = Hi/H = v/u
Hi is the image height
H is the object height
v is the image distance
u is the object distance
First, we need to get the image distance v
Using the mirror formula;
1/f = 1/v+ 1/u
1/-6 = 1/v + 1/12
1/v = -1/12 - 1/6
1/v = -1-2/12
1/v = -3/12
v = 12/-3cm
v = -4cm
Next is to get the image height Hi
Using the expression;
Hi/H = v/u
Hi/15 = 4/12
Hi/15 = 1/3
3Hi = 15
Hi = 15/3
Hi = 5.0cm
Hence the image height is 5.0cm
Answer:
D. 5.0 cm
Explanation:
got it correct on the test
how much would a 70 kg mean weight on the Moon what should be its mass on the earth and on the moon
Answer:
I don't know sorry' please
Who would most likely be required to work with sodium hydroxide?
Answer:
a plumber
Explanation:
Using deductive reasoning, write the converse, inverse, and contra positive of an if-then statement. Part I: Write an if-then statement below. (1 point)
Converse:
if q , then p
Inverse:
If not p , the not q.
Contra Positive:
If not q, then not p.
If then statement is a conditional statement. In this statement there is some condition at the first part of the sentence and then in the second part there is a conclusion.
The example of if then sentence is as follows,
If this camel is thirsty, then it will drink water from the well.
In this example there is a condition in first part that if camel is thirsty, in the second part there is conclusion which states that then it will drink water from well.
Learn more at https://brainly.com/question/24294393
Two forces of equal magnitude F
have a resultant of the same
magnitude F. The angle between the
two forces is
45°
120°
O 60°
O 35°
Answer:
the ans is 120 degree hope it will help
Resistivity of metallic wire
depends on
*
It's length
It's shape
It's thickness
Nature of material
Answer:
nature of material
hope this help you
What is an effect of continental drift?
Answer: An effect of continental drift is causing tectonic plates resting upon the convecting mantle to move which results in natural disasters like earthquakes, volcanic eruptions, and more.
What did Ernest Rutherford's experiment of a beam of alpha particles aimed
at a sheet of gold foil lead him to conclude?
A. The theory that atoms were the building block of all matter was
correct.
B. The majority of the atom's mass and its positive charge are
concentrated in the atom's center.
C. An electron has a larger mass than the alpha particles, causing
them to reflect upon collision.
D. J.J. Thomson's theory of electrons suspended in a sea of
positively charged particles was correct.
Answer:
B - Only a concentration of mass in the nucleus could explain the deflection of the incident particles.
Group elements number 11 to 20 as either metallic, non metallic or metalloid.
Answer:
The elements are grouped into the different substances by color. As you can see, Lithium, Beryllium, Sodium, Magnesium, Aluminum, Potassium, and Calcium are metals out of the first 20 elements.
Hydrogen, Helium, Carbon, Nitrogen, Oxygen, Fluorine, Neon, Phosphorus, Sulfur, Chlorine, and Argon, are non-metals within the first 20 elements.
Boron and Silicon count as Metalloids in the Periodic Table (properties of both metals and non-metals)
reference- socatric q and a
Explanation:
Answer:
(11-13) - Metals
(14) - Metalloid
(15-18) - Non- metals
(19-20) - Metals
Explanation:
The elements from 11 to 13 are metals. They are Sodium(Na), Magnesium(Mg) and Aluminum(Al) respectively.
The element 14 is a metalloid. It’s Silicon(Si).
The elements from 15 to 18 are non metals. The 18th element is a noble gas known as Argon(Ar).
The elements from 15 to 17 are Phosphorus(P), Sulphur(S) and Chlorine(Cl).
The elements from 19 to 20 are metals. They are Potassium(K) and Calcium(Ca).
A race car sits on the starting line on a racetrack. when the race starts, the car's tires exert a force on the track. According to newton's third law of motion, what causes the car to accelerate forward?
A. the track surface exerts a force that is larger and in the same direction as the force exerted by th tires.
B. a normal force that is equal in a magnitude to gravity pushes up on the car
C. the force of friction between the car tires and the track pulls the car forward
D. the track exerts a force that is equal and in the opposite direction as the force exerted by the tires
Answer:
D. the track exerts a force that is equal and in the opposite direction as the force exerted by the tires
Explanation:
Newton's third law of motion states that for every action, there is an equal and opposite reaction. This speaks of equality in magnitude of force applied but in an opposite direction to one another.
According to this reaction, a car's tires exert a force on the track, this means that in accordance to Newton's third law, the track must exert an equal but opposite force on the car's tires. This causes the car to accelerate forward.
Câu 1. Con lắc lò xo treo thẳng đứng, dao động điều hòa với biên độ 2cm và tần số góc 20 rad/s. Chiều dài tự nhiên của lò xo là 30cm. Chiều dài nhỏ nhất và lớn nhất của lò xo trong quá trình dao động là bao nhiêu? Lấy g = 10m/s2.
Answer:
28 cm and 32 cm
Explanation:
1. The spring pendulum hangs vertically, oscillates harmonic with amplitude 2cm and angular frequency 20 rad/s. The natural length of
a spring is 30cm. What is the minimum and maximum length of the spring during the oscillation? Take g = 10m/s2.
As the amplitude is 2 cm and the natural length is 30 cm. So, it oscillates between 30 -2 = 28 cm to 30 + 2 = 32 cm.
So, the minimum length is 28 cm and the maximum length is 32 cm.
Many people believe that if the human race continues to use energy as we are now, without change, we'll witness a significant worldwide environmental impact in this century. Research this topic and discuss this possibility. Include concrete examples of specific environmental consequences of global warming.
Answer:
It is correct to say that if the human race continues to use energy as it is now, without change, we will witness negative environmental impacts around the world in this century.
As a concrete example, we can cite the means of transport that use fossil fuels, such as cars and buses, which release polluting gases into the atmospheric layer and cause the greenhouse effect, contributing to global warming.
To solve these problems, it is necessary to raise the awareness of individuals, so that there is more and more interest and search for environmentally responsible solutions, such as the large-scale production of electric cars, which do not pollute the environment.
the masses of your hand and your notebook are quite small, so the force of attraction between them is
How does the electric field intensity vary with the increase of distance of the point from the centre of a charged conducting sphere? Explain with graph.
Answer:
(i) Electric field outside the shell:
For point r>R; draw a spherical gaussian surface of radius r.
Using gauss law, ∮E.ds=q0qend
Since E is perpendicular to gaussian surface, angle betwee E is 0.
Also E being constant, can be taken out of integral.
So, E(4πr2)=q0q
So, E=4πε01r2q
How does the comets energy change as it moves from point a to point d
Answer:
At point A, the comet has the least kinetic energy because the comet is resting. 3. From point B to point D its orbit's potential energy is decreasing and its kinetic energy is increasing meaning it's moving more and more
What is the relation between the weight of a body and acceleraton due to gravity?
Answer:
All objects on Earth, regardless of their mass, accelerate due to gravity at the same rate - that is, 9.8 m/sec2. The weight of an object can be calculated using the formula for force - F = m * a - where F equals the weight of the object and now the acceleration (a) is the acceleration of gravity (g).
: Chuyển động Một vật xuất phát từ A chuyển động đều về B cách A 240 m với vận tốc 10 m/s. Cùng lúc đó, một vật khác chuyển động đều từ B về A. Sau 15 s hai vật gặp nhau. Tìm vận tốc của vật thứ hai và vị trí hai vật gặp nhau.
Which solution has the greatest number of hydrogen ions?
blood, pH = 7.2
lemon juice, pH = 2
soda, pH = 3.5
bleach, pH = 13.5
Answer:
lemon
Explanation:
the lower the number the hier hydrogen ions
Answer: B
Explanation:
How long can a tow rope or chain be?
1. 20 feet 2. 15 feet
3. 5 feet
4. 10 feet
Answer:
"For towing, a tow chain should be of a length that keeps both vehicles within the maximum 4.5 meter distance, also tow chains an be any length 20 foot chains are often chosen"
Explanation:
- https://letstowthat.com
Also Quick note the feet of tow rope or chain varies on the situation but most longest or 20 feet.
Describe the laws of liquid pressure and Explain the term fluid. (Please give the correct answer, it's really urgent)
Answer:
The laws of liquid pressure are
(i) Pressure inside the liquid increases with the depth from the free surface of the liquid.
(ii) Pressure is same at all points on a horizontal plane, in case of stationary liquid.
(iii) Pressure is same in all directions about a point inside the liquid.
(iv) Pressure at same depth is different in different liquids. It increases with the increase in the density of the liquid.
(v) A liquid will always seek its own level.
A Fluid is any liquid or gas or generally any material that cannot sustain a tangential, or shearing, force when at rest.
Explanation:
A 0.36 kg object, attached to a spring with constant k=10n/m, is moving on a horizontal frictionless surface in simple harmonic motion of amplitude 0.082 m. What is it speed when it’s displacement is 0.041 m
Answer:
The speed of the object when displacement is 0.041 meters is 0.375 meters per second.
Explanation:
First, we need to determine the angular frequency of the system ([tex]\omega[/tex]), in radians per second:
[tex]\omega = \sqrt{\frac{k}{m} }[/tex] (1)
Where:
[tex]k[/tex] - Spring constant, in newtons per meter.
[tex]m[/tex] - Mass, in kilograms.
If we know that [tex]k = 10\,\frac{N}{m}[/tex] and [tex]m = 0.36\,kg[/tex], then the angular frequency of the system is:
[tex]\omega = \sqrt{\frac{10\,\frac{N}{m} }{0.36\,kg} }[/tex]
[tex]\omega \approx 5.270\,\frac{rad}{s}[/tex]
The kinematic formulas for the position ([tex]x(t)[/tex]), in meters, velocity ([tex]\dot x(t)[/tex]), in meters per second, and acceleration of the object ([tex]\ddot x(t)[/tex]), in meters per square second, are:
[tex]x(t) = A\cdot \cos \omega t[/tex] (2)
[tex]\dot x(t) = -\omega \cdot A \cdot \sin \omega t[/tex] (3)
[tex]\ddot x(t) = -\omega^{2}\cdot A \cdot \cos \omega t[/tex] (4)
Where [tex]A[/tex] is the amplitude of the motion, in meters.
From (2) we determine the time associated with position [tex]x(t) = 0.041\,m[/tex] ([tex]\omega \approx 5.270\,\frac{rad}{s}[/tex], [tex]A = 0.082\,m[/tex]):
[tex]t = \frac{1}{\omega}\cdot \cos^{-1} \left(\frac{x(t)}{A} \right)[/tex] (5)
[tex]t = \frac{1}{5.270\,\frac{rad}{s} }\cdot \cos^{-1}\left(\frac{0.041\,m}{0.082\,m} \right)[/tex]
[tex]t = 0.199\,s[/tex]
And the speed of the object is:
[tex]\dot x(t) = -\left(5.270\,\frac{rad}{s} \right)\cdot (0.082\,m)\cdot \sin \left[\left(5.270\,\frac{rad}{s} \right)\cdot (0.199\,s)\right][/tex]
[tex]\dot x(t) \approx -0.375\,\frac{m}{s}[/tex]
The speed of the object when displacement is 0.041 meters is 0.375 meters per second.