Answer:
Organisms and their environment
Sally accelerates a 250 kg cart at 3 m/s/s. What must be
the net force?
What is this question asking you to find?
What is the acceleration of a 50kg object pushed with a force of 500 newtons?
Answer:
10
Explanation:
Acceleration = Force / Mass
500 N / 50 Kg = 10
A.they are farther apart
B.they have increased in size
C.they have lost energy
D.they are moving slower
Answer:
c
Explanation:
A bicycle has a mass of 10kg and an acceleration of 2m/s². What is the net force of the bicycle?
20 m/s
20 m/s
5 N
5 N
0.2 m/s
0.2 m/s
20 N
Answer:
The answer is 20 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
Force = mass × accelerationFrom the question
mass = 10 kg
acceleration = 2 m/s²
We have
Force = 10 × 2
We have the final answer as
20 NHope this helps you
Explain the free motion of particles.
Answer:
D : An electron may act with either particle-like or wave-like characteristics.
Explanation:
This is the whole basis of the Schrödinger equation.
The other options are correct, but they do not state the dual nature of the electron.
Max and Jimmy continue jumping on a trampoline. When they jump at the same time, Max makes a wave crest and Jimmy makes a wave trough. What type of wave interaction occurred?
Answer:
The type of wave interaction occurred is destructive interference
Explanation:
Given that,
Max and Jimmy jump at same time.
Wave crest makes by Max and wave trough makes by Jimmy.
We need to find the type of wave interaction occurred
According to given data,
We know that,
If the wave crest and wave trough are interacted to each other then the interaction is destructive interference.
If the wave crest and wave trough are interacted with crest and trough then the interaction is constructive interference.
So, we can say that if the wave crest and wave trough are interacted to each other then the interaction is called destructive interference
Hence, The type of wave interaction occurred is destructive interference
Answer:
destructive interference
Explanation:
marks
An object can travel a distance of 20 meters at the same time that it has a displacement of zero.
A. True
B. False
Answer:
Yes
Explanation:
Yes, displacement can be zero even if the distance is not zero. For example, when a body is thrown vertically upwards from a point A on the ground, after some time it comes back to the same point A.
3. What is the acceleration of a 10 kg mass pushed by a 5 N force?
Answer:
F=ma
Plug it in:
5=10a
5/10=(10a)/10
.5m/s²=a
Explanation:
Brainliest?
Answer:
[tex]\frac{1}{2} \frac{m}{s^2}[/tex]
Explanation:
Recall the equation F = ma. We want to find a, and we already know F and m, so we can plug those in. [tex]5N = 10kg \cdot a -> a = 5N/10kg = \frac{1}{2} \frac{m}{s^2}[/tex]
Currently, the world population is about:
A. 7 billion
B. 450 million
C. 1.2 trillion
D. 700 million
Besides the leaves, what else do the trees release in the autumn?
Answer:
Tress can also release acorns and pinecones and such
Explanation:
Which describes one event that causes an eclipse?
Earth’s rotation on its axis
shadows from clouds covering Earth
Earth’s shadow covering the moon
the gravity from the moon and Sun pulling in the same direction
Answer:
Earths shadow covering the moon would create a lunar eclipse.
Explanation:
because i just know
A lunar eclipse is occur when Earth’s shadow is covering the moon.
What is eclipse?An eclipse happens when one astronomical body like Earth or moon blocks light from or to another.
What is lunar eclipse?A lunar eclipse is caused by Earth blocking sunlight from reaching the moon and causing a shadow across the lunar surface.
What is solar eclipse?Sometimes when the Moon orbits Earth, the Moon moves between the Sun and Earth. When this happens, the Moon blocks the light of the Sun from reaching Earth. This causes an eclipse of the Sun, or a solar eclipse.
To know more about eclipse here
https://brainly.com/question/4279342
#SPJ2
A box has pushed across the floor for 5.2 M with a 48 N force how much work is done?
an object falls from a high building and hits the ground in 9.0 seconds.ignoeing air resistance,what is the distance that it fell?
Answer:
kinematic eq. d = Vi*t + 1/2a*[tex]t^{2}[/tex]
Explanation:
Vi=0
d=1/2 a*[tex]t^{2}[/tex]
d= 1/2(9.8)[tex]0.9^{2}[/tex]
d=3.969 m
The distance from which the object falls is 393.9 meters.
Given that, an object falls from a high building and hits the ground in 9.0 seconds and air resistance = 0
So the distance can be calculated by the formula given below.
[tex]s = vt + \dfrac{1}{2} at^2[/tex]
Where, [tex]s[/tex] is the distance in meters, [tex]t[/tex] is time (in seconds) taken by the object in motion, [tex]a[/tex] is the acceleration of the object in meter per second square and [tex]v[/tex] is the final velocity in meter per second.
In this case, object falls from high building to the ground so the final velocity would be zero. Gravitational acceleration is -9.8 meter per second square.
Substituting the values in the above formula,
[tex]s = (9.0\times0) + \dfrac{1}{2}(-9.8\times(9.0)^2)\\s = 0 + (-9.8\times81\times0.5)\\s = 396.9 \;\rm m[/tex]
The distance from which the object falls is 393.9 meters.
For more details, follow the link given below.
https://brainly.com/question/8898885.
3. Bamey is walking with all his good friends. If he began walking away from Lucy 12 seconds ago at an average speed of 1.5 m/s and is now 25 m from Lucy, the how far from her was he when he began walking?
Answer:
7 meters away
Explanation:
12 x 1.5 = 18
25 - 18 = 7
match the term with its definition
Which of the following objects has the most gravity? A. a semi-truck B. A grain of sand C. Jupiter D. All of these have equal gravity
Answer:
C. Jupiter
Explanation:
Gravity is the force by which a planet or other body draws objects toward its center. The force of gravity keeps all of the planets in orbit around the sun.
plz mark brainloest
36 In the given circuit, A, B, C and D are four lamps connected with a battery of
60V.
Analyse the circuit to answer the following questions.
(i) What kind of combination are the lamps arranged in (series or parallel)?
(ii) Explain with reference to your above answer, what are the advantages (any
two) of this combination of lamps?
(iii) Explain with proper calculations which lamp glows the brightest?
(iv) Find out the total resistance of the circuit.
A parallel circuit, is one which the conductors leading into the bulbs are joined together on one side of the bulbs, and the conductors coming out of the bulbs are joined together on the other side of the bulb
The correct arrangement, advantages, lamp and resistance values are;
(i) The lamps are arranged in parallel(ii) Improved reliability Optimum performance of the bulbs(iii) Lamp C(iv) The total resistance is 4 ΩThe reason the above values are correct are as follows:
(i) From the diagram attached, the lamps are arrange in parallel
This is so because, each lamp is directly connected across the terminals of the the voltage source
(ii) The advantages of the bulbs arranges in parallel are;
The other lamps will continue working if one lamp becomes faultyThe voltage is applied directly to each lamp, such that the lamps are lit with the maximum power available in the circuit(iii) The brightness of the lamp is given by the power of the lamp
The lamp with the highest wattage, or power glows the most
Power, P = Voltage, V × Current, I
The power for lamp A, [tex]P_A[/tex] = 60 V × 3 A = 180 W
The power for lamp B, [tex]P_B[/tex] = 60 V × 4 A = 240 W
The power for lamp C, [tex]P_C[/tex] = 60 V × 5 A = 300 W (Brightest)
The power for lamp D, [tex]P_D[/tex] = 60 V × 3 A = 180 W
Therefore, lamp C has the highest power and glows the brightest
(iv) The total resistance is given by the voltage, divided by the total current
Total current, I = 3 A + 4 A + 5 A + 3 A = 15 A
[tex]Total \ resistance, \ R_{tot} = \dfrac{V}{I_{tot}}[/tex]
Therefore;
[tex]Total \ resistance, \ R_{tot} = \dfrac{60 \, V}{15 \, A }}=4 \, \Omega[/tex]
The total resistance, R = 4 Ω
Learn more about series and parallel circuits here:
https://brainly.com/question/12140473
It takes a force of 50 N to give a body an acceleration of 10 m/s2. What is the mass of the body?
Answer:
The answer is 5 kgExplanation:
The mass of the body can be found by using the formula
[tex]m = \frac{f}{a} \\ [/tex]
f is the force
a is the acceleration
We have
[tex]m = \frac{50}{10} \\ [/tex]
We have the final answer as
5 kgHope this helps you
Three resistors are placed in series. They have the following resistances: R1 = 20 ohms, R2 = 20 ohms, R3 = 10 ohms. What
current would be moved through this circuit by a 5-V power supply?
Answer:
0.10 A
Explanation:
Name 2 types of electric circuits based on their connection pattern
Answer:
When there are two or more electrical devices in a circuit with an energy source, there are a couple of basic ways by which we connect them. They can either be connected in series or parallel
[tex]\huge\bold\green{Answer:-}[/tex]
Series Circuit:-A series circuit has only one path for electricity to flow from one point to another. The amount of electricity in the circuit is consistent throughout any component in the circuit. When electricity flows through a series circuit, its rate of flow (speed) will never fluctuate. The total resistance of a series circuit equals the sum of individual resistances. The more resistors that a series circuit has, the more difficult it is for electrons to flow.
Parallel circuit:-A parallel circuit has multiple paths for electricity to flow from one point to another. According to website All About Circuits, “all components are connected between the same set of electrically common points.” Often, resistors and sources will be connected between two sets of electrically common points. In a parallel circuit, electricity can flow in multiple directions horizontally and vertically. The components of a parallel circuit will have the same voltage across their ends and will have identical polarities.
FOLLOW ME ♥️A granite monument has a volume of 25,365.4 cm. The density of granite is 2.7 g/cms. Use this information to calculate the mass of the monument to the nearest tenth. The mass of the granite monument is
Answer:
m = 68,486,6 g is the answer.
Explanation:
To calculate mass you use formula:
m= V*r
To avoid remembering this formula you can see the type of unit on each given variable. We can see that we have g/cm^3 and cm^3. If we multiply them, we negate cm^3 and cm^3 and we are left with g which is unit for mass.
Hope I helped! ☺
Select the correct answer. What are the units for the spring constant, k?
A. newton meters
B. newton seconds
C. newtons/meter
D. newtons/second
E. newtons/seconds
Answer:
The spring constant,k is measured in newtons per meter
Answer:
C. NEWTON / METRE is the correct answer .Thank your ☺️☺️
Please someone answer, I will mark them who answers as brainliest,
How much energy is needed to heat 100 kg of paraffin from 10 degree Celsius to 30 degree Celsius. The specific heat capacity of paraffin is. 2200 unit.
Answer:
40,000J
Explanation:
The heat energy required to raise the temperature of unit mass of substance through unit degree is called specific heat of substance . As given 2000J energy is needed to heat 1 kg of paraffin through 1
o
C, therefore specific heat of paraffin will be 2000J/kg−
o
C.
Now, heat energy required to raise the temperature of mass m of substance (specific heat c) through Δt is given by ,
Q=mcΔt,
Given: m=10kg,Δt=2
o
C,c=2000J/kg−
o
C
Q=10×2000×2=40,000J
Calculate the mass of a lorry that has a momentum of 4600 kg m/s and a velocity of 15m/s. Give your answer to two decimal places
PLZZZ HELP
A boat moving at a constant speed travels 15 meters in 8 seconds. How far does it travel
in 40 seconds?
75 meters
53 meters
335 meters
480 meters
The real advantage to hydrostatic weighing is that it __________.
A.
can be done anywhere with no equipment
B.
gives one of the most accurate measurements of body fat
C.
uses calipers to measure body fat
Answer:
B. gives one of the most accurate measurements of body fat
Answer:
B. ) gives one of the most accurate measurements of body fat
the smooth and accurate execution of movement as conceived in the mind and executed by the body parts
The smooth and accurate execution of movement as conceived in the mind and executed by the body parts describes ; The central nervous system.
Although your question is incomplete an answer is provided which falls within the scope of your question
The human brain receives, interprets and transfer signals it deduces from the impulses it received to the various sense organs ( body parts ) for execution. and this process involves coordination within the nervous system.
The central nervous system is a category of the Nervous system of a human and it consists of the spinal cord and the human brain. and the peripheral nervous system
Hence we can conclude the smooth and accurate execution of movement as conceived in the mind and executed by the body parts describes, The central nervous system.
Learn more : https://brainly.com/question/21155242
an object has volume of 5cm and a mass of 20 g what is the density of the object
Which statement best describes the general movement of air masses?
A.
They move from areas of high humidity to areas of low humidity.
B.
They move from areas of high altitude to areas of low altitude.
C.
They move from areas of low temperature to areas of high temperature.
D.
They move from areas of high pressure to areas of low pressure.
Answer:
d
Explanation:
i looked it up
I need help with all these. Number them pleaseee
