Answer:
You need to start slowing down, it's dangerous and illegal to drive around or under an active crossing gate.
Explanation:
No matter what even if u are impatient when those lights start flashing u need to just immediately stop and just wait for it to pass. that's how many crashed have happen cause people want to play "let's race the train and see if i can make it". just because the train looks slow and looks as if it isn't moving that fast it's going atleast 190-200 mph if it's a high speed and no matter what u cant escape it. We want u home in one piece, just wait !!
Liz is creating a moving fluid system. Which of the following describes what she will need to install to create motion?
Answer:
Actuator
Explanation: Just did an assignment And got correct!
Answer:
acutator
Explanation:
What is the first component to install in steel stud framing system?
fast shipping ,high quality product, fastan the floor and ceiling tracks ,
When using a Drill Press the speed of the drill should be
O a. slowed to be neat and safe
b. made faster to finish quicker
c. left alone, the speed does not matter
d. adjusted based on the hardness of the material
The denominator of a fraction is 4 more than the numenator. If 4 is added to the numenator and 7 is added to the denominator, the value of the fraction 1 half find the original fraction.
Answer:
[tex]\frac{3}{7}[/tex]
Explanation:
Lets take the numerator of the fraction to be = x
So the denominator of the fraction is 4 more than the numerator = x+4
The fraction is ;[tex]\frac{x}{4+x}[/tex]
Now add 4 to the numerator and add 7 to the denominator as;
[tex]\frac{x+4}{4+x+7} =\frac{x+4}{x+11}[/tex]
This new fraction is equal to 1 half =1/2
write the equation as;
[tex]\frac{x+4}{x+11} =\frac{1}{2}[/tex]
perform cross-product
2(x+4 )=1( x+11 )
2x+8 = x + 11
2x-x = 11-8
x=3
The original fraction is;
[tex]\frac{x}{4+x} =\frac{3}{3+4} =\frac{3}{7}[/tex]
When your car is broken down on the side of the road, you should make your vehicle as _____ as possible.
A. visible
B. comfortable
C. cooled
D. loud
Answer:
Visible
Explanation:
If your car is not visible you will get hit
A vernier caliper will measure in what ( URGENT)
What is 7-?=4 i need help
Answer:
3
Explanation:
7-3=4
Answer:
3
Explanation:
Because when you do 7 - 3 it gives you 4. You check this by adding 4 to 3 and you will get 7. Also you can figure it out the number by subtracting 7 and 4 to get your answer.
Your answer will be 3.
I hope this helped. I am sorry if you get this wrong. Have a wonderful day.
Which best describes the charting method of note-taking?
O It requires more writing than other note-taking methods.
O It shows the most relevant information in a clear way.
O It does not show connections between facts and details.
O It does not rely on awareness of the categories covered.
The practice of taking notes is the process of capturing information from many sources and platforms. The correct option is B.
What is Note-taking?The practice of taking notes is the process of capturing information from many sources and platforms. By taking notes, the writer captures the substance of the material, relieving their mind of the burden of recalling everything.
The best description of the charting method of note-taking is that it shows the most relevant information in a clear way.
Hence, the correct option is B.
Learn more about Note-taking:
https://brainly.com/question/26039794
#SPJ2
Which option identifies the type of engineer described in the following scenario?
A team of engineers is working on a project to design a new medical drink to fight the AIDS epidemic in Africa.
electrical
mechanical
chemical
agricultural
Answer:
i do believe that would be chemical
Explanation:
Annie has been designing a new pool filter for pools of over 5,000 gallons. The prototype she designed works well, but only on pools of less than 3,000 gallons. Which statement explains why Annie is not frustrated?
A. Engineers still need to design filters for smaller pools; this prototype can be distributed to other clients.
B. Engineers work in a cyclical process; she can just begin a totally new project.
C. Engineers can always take an existing idea and expand on it.
D. Engineers will not allow failures to stop them; a previous failure can be a practical solution for a new problem.
Answer:
C. Engineers can always take an existing idea and expand on it.
Explanation:
Engineers are problem solvers. When they identify a challenge, they design solutions and test the ideas using a prototype. When the prototype performs the desired output, they go ahead to implement a full design. This is to say, they take the existing idea that works in certain parameters and expand it to fit the intended solution.
Answer choices A,B, and D are true but not correct because the issue of frustration is not indicated. They are true because they explain the general form of working of engineers which is: continuing designing everyday to solve new problems, the work done by engineers has stages and processes and finally because engineers seek to give solutions, failure is not failing but a new problem that needs a new idea as a solution.
Answer:
c
Explanation:
A team of engineers is tasked with designing a hydraulic engine for a motorboat that is as efficient as possible. Identify three of the
seven design phases, and explain why they are individually important in the design process.
Help ASAP!
Answer:
Driving surface area as subject to differential pressuresHow to achieve continuous rotationMechanical connectionsExplanation:
The general stages of thinking when designing a system are;
First understanding the problem that requires you to design a solutionDefining the problem that needs to be solved. In this case is to design an efficient hydraulic engine for a motorboatResearch to find any available solutions for similar problemsIdea of the solutionA prototype to try solve the challengeSelecting and adjusting the prototype as you implement the solution.For a hydraulic engine design, the following designing parts are vital;
Driving surface area as subject to differential pressuresHow to achieve continuous rotationMechanical connectionPressures are important due to motor displacements. Fuel burns in the cylinder to cause power through fuel gases burning and expansion which is the four-stroke cycle. Continuous rotation will come in the design considerations through reciprocating motions of pistons into rotary motions. Mechanical connections are vital especially in crank shaft turns, gear box that turns horizontal motions to spinning motions and finally the propeller that drives the boat on the water.
Answer:
Which of the following describes efficiency?
the ability to increase heat production
the ability to increase productivity
the ability to complete fuel extraction safely
the ability to produce something without waste
Explanation:
What is matrix ? answer plzzz 27 point you got answer
Answer:
A matrix is a convenient and useful way of representing a graph to a computer. ... Matrices lend themselves easily to mechanical manipulations. Besides, many known results of matrix algebra can be readily applied to study the structural properties of graphs from an algebraic point of view.
The correct name for a “shooting star” is a:
Answer:
There is no "correct" name, but the scientific name could be meteorite.
Answer:
Meteor
Explanation:
Which of the following are benefits of the Python programming
language? Check all that apply.
It is free to use.
It saves programmers time.
It is known for its symbols.
It is relatively easy to learn.
Answer: A) it is free to use
B) It saves programmers time
D) It is relatively easy to learn.
Explanation:
Answer:
A, B, and D
Explanation:
I need to drop 10 V to feed an LED from a 12 V power supply. The resistor value is 490 Ω. How much of my battery power will be wasted in the resistor?
Answer:
P = 0.204 W
Explanation:
Given that,
Voltage drop is 10 V to feed an LED from a 12 V power supply. The resistor value is 490 Ω.
We need to find how much of my battery power will be wasted in the resistor. The power of a battery is given in terms of voltage and resistance is given by :
[tex]P=\dfrac{V^2}{R}[/tex]
V is the voltage drop to feed an LED
Putting all the values,
[tex]P=\dfrac{(10)^2}{490}\\\\P=0.204\ W[/tex]
So, 0.204 W of power will be wasted in the resistor.
Securing doors and windows are necessary when leaving your vehicle.
Select one:
TRUE
FALSE
Answer:
True
Explanation:
Which option identifies the type of engineer most likely to be in charge in the following scenario?
A cell phone company wants to offer expanded coverage in the Andes Mountains in South America. The company hires a team of engineers to prepare a feasibility study.
civil
mechanical
agricultural
electrical
Answer:
civil engineering
Explanation:
they have survey and do construction
Answer:
its civil engineering
The engineer who would be held accountable for a design flaw in a bridge
5 points
Chemical Engineer
Mechanical Engineer
Electrical Engineer
Civil Engineer
Answer:
product safety engineers
Explanation:
fax.
Answer:
B. Civil Engineers
Explanation:
took the test
Which of the following might a biomedical engineer be involved in?
study of lions in the African grasslands
analysis of how organisms work
biological modeling of neural networks
study of environmental depletion
C: biological modeling of neural networks
Neuroengineering is a discipline that falls under the BME field.
Why is it important to keep hand tools free of oil and grease?
Answer:
keeps it from rusting
Explanation:
Fred wants to help his customer understand his vision for constructing the office interior. Which visual representation will best explain Fred’s ideas?
A.
structural
B.
perspective projection
C.
auxiliary view
D.
cutting-plane view
E.
elevation drawing
Answer:
D. cutting-plane view
Explanation:
When using the cutting plane view, cutting plane lines are utilized to show a plane or planes in which a sectional view is shown. Section views give a clear indication of interior views of an object or structure including hidden parts or features which are not directly visible through convectional ways such as direct observation.
how has technology changed since the introduction of semiconductors.
Answer:
It has raised and evolved by being able to create different valuabes
and functionsExplanation:
Vs = 9 V, I = 13.6 mA. What is R?
Answer:
661.7 ohm
Explanation:
The base formula for the solution is
[tex]i = \frac{v}{r} [/tex]
so the I is equal to V divided by R and so we can change the formula according to the given stats so we change it to
[tex]r = \frac{v}{i} [/tex]
just put the stats in V and I and you will get the answer, don forget to change the milliampere to ampere!!
Give an example of how the fields of science, technology, and mathematics are commonly used when building a highway
Answer:
Engineering is the application of science and math to solve problems. ... Engineers use science and math to come up with practical solutions to problems. ... Station, but they are also building maps to the human genome and better, ... work in businesses related to their areas of specialization;
Example
hope this helps
3. All of the following are wire protection devices except:
(A) heat shrink tubing.
(B) Flux
(C)liquid electrical tape,
(D) wiring harness,
Answer:
c is the onr correct answer
Answer:
liquid electrical tape
Explanation:
Which option should the engineers focus on as they develop the train in the following scenario?
Richmond, Virginia, has recently approved the construction of a metro system throughout part of the city. As engineers study other
metro lines, they notice that there is an extreme amount of energy lost as the trains start and stop.
Engineers can design a train with additional valves to increase energy.
O Engineers can design a train with additional fluid pumps to increase efficiency
Engineers can design a train with a regenerative braking system.
Engineers can design a train involving larger hydraulic power systems.
lol
Answer:
Engineers can design a train with a regenerative braking system
Explanation:
Assuming the point of the question is that the engineers want to focus on using energy efficiently when starting and stopping, they would likely want to consider a regenerative braking system. Such a system can store energy during braking so that it can be used during starting, reducing the amount of energy that must be supplied by an outside power source.
Answer:
Engineers can design a train with a regenerative braking system
Explanation:
ur mom last night
Hand-held cutoff wheels can be powered by electricity or air.
True or false
Answer:
True!
Explanation:
What equipment is generally used in the tool room to cut high speed tool bits?
Group of answer choices
Abrasive saw
Band saw
Torch
Hack saw
Answer:
The answer is A Abrasive Saw
Explain how an enhanced fluid power system improved efficiency in the following scenario.
Oliver has designed a new dump truck that is emitting 50 percent less carbon and needs 60 percent less fuel to run. The savings will
allow his construction company to purchase two more vehicles.
HELP !!
Answer:
He can go a few places instead doing to many pit stops
Explanation:
Answer:
The correct answer is that the system may be equipped with microstructures to reduce the friction of the fluid.
Explanation:
Oliver may have implemented a regenerative braking system, decreasing the amount of energy lost in the braking process. He also may have eliminated valves. Valves are highly susceptible to wear in a fluid power system. He may have used an actuator instead.
A material's Unwillingness to
be drawn, stretched or formed.
Breaks easily
Answer:
Brittle
Explanation:
A brittle material is one that shows unwillingness to be drawn, stretched or formed. These materials are opposite of ductile ones{copper & aluminum} that can be formed into sheets or drawn into wires. A brittle material is hard but liable to break easily. Example of material include : cast iron, ceramics and concrete.
