Do I look good yes or no

Answer:

nature of the material

hope this help you

Part A - The apparent displacement of the mark is 4 cm.

The refractive index of a material, n = real depth, D/apparent depth, L.

So, n = D/L

Since the refractive index of the triangular glass prism is 1.5, n = 1.5. Also, the triangular glass prism is 12 cm thick and placed on a mark on a piece of paper resting on a horizontal bench. So, the real depth of the mark on the piece of paper through the triangular prism is D = 12 cm and its apparent depth is L.

Since n = D/L,

making L, subject of the formula, we have

L = D/n

Substituting the values of the variables into the equation, we have

L = D/n

L = 12 cm/1.5

L = 8 cm

so, the apparent depth of the mark is 8 cm.

So, the apparent displacement of the mark is d = D - L = 12 cm - 8 cm = 4 cm

Thus the apparent displacement of the mark is 4 cm.

Part B - The refractive index of water, n = 1.33.

The refractive index of a material, n = real depth, D/apparent depth, L.

So, n = D/L

Since the depth of water in the jar is 24 cm, the real depth, D = 24 cm.

Also, the bottom of the jar appears to be raised by 6 cm. So, the apparent depth, L = 24 cm - 6 cm = 18 cm

Since n = D/L, the refractive index of water n = D/L

Substituting the values of the variables into the equation, we have

n = D/L

= 24 cm/18 cm

= 1.33

So, the refractive index of water, n = 1.33.

Learn more about refractive index here:

https://brainly.com/question/12768121

Answer: Remove your foot from the gas pedal and slow down

Explanation:

Hydroplaning also refers to aquaplaning and this refers to the scenario whereby there's a layer of water that builds between the tyres of a car and the surface of the road which then brings about a loss of traction which eventually leads to a situation whereby the car doesn't respond to control inputs.

This lack of traction with the pavement takes away your control of the vehicle and to regain control of the vehicle, one should remove your foot from the gas pedal and slow down.

Answer: The correct answer is B- The ions are free to move in water and carry an electric charge.

Answer:

Explanation:

i) frequency is the square root of the quotient of Tension over linear density/ all divided by two times the length.

linear density and tension are constant, so the numerator remains constant

The length is doubled, so the frequency is halved.

f = 128 Hz

ii) Doubling the tension increases the frequency by √2

f = 256√2 = 362 Hz

2) If other factors remain constant, increasing tension increases frequency.

Answer:

이 질문입니까?

Explanation:

평균 공기 밀도가 1.25kg/m³이고 수은 밀도가 13600kg/m³이고 g=10N/kg인 경우 산 기슭의 기압은 수은의 75.0cm이고 정상의 수은은 60cm입니다. 산의 높이를 계산?

The air pressure at the base of the mountain is 75.0 cm of mercury while at the top is 60 cm of mercury. The height of the mountain is approximately 0.1468 meters.

The pressure difference (∆P) between the base and the top of the mountain is given by:

∆P = ρgh

Where:

ρ is the density of the fluid (mercury) = 13,600 kg/m³

g is the acceleration due to gravity = 10 N/kg

h is the height of the fluid column (mountain)

We have the pressure difference: ∆P = 75.0 - 60.0 = 15.0 cmHg.

To convert cmHg to pascals (Pa), we use the conversion factor: 1 cmHg = 1333.22 Pa.

∆P = 15.0 × 1333.22

∆P = 19,998.3 Pa

h = ∆P ÷ (ρg)

h = 19,998.3 ÷ (13,600 × 10)

h = 0.1468 m

Therefore, the height of the mountain is approximately 0.1468 meters.

To know more about the air pressure:

https://brainly.com/question/15189000

#SPJ5

Answer:

H + H ------> He + energy. He + He -----> H + H + He.

Explanation:

Hydrogen having one proton and no neutron fuse with hydrogen having one proton and one neutron forming helium atom with the release of photon. After that two helium atoms combine together forming two hydrogen atoms having one proton each whereas one helium atom having two protons and two neutrons present in their nucleus so the end product of this reaction is hydrogen atoms and helium.

Answer:

a. Acceleration, a = 1.47 * 10^{-9} m/s²

b. Mass = 4.57 * 10^{10} kilograms

c. Force = 67.12 Newton

Explanation:

Given the following data;

Distance = 93 cm to meters = 93/100 = 0.93 meters

Weight = 67 N

Time = 9.89 hours to seconds = 35604 seconds

Initial velocity = 0 m/s (since it's starting from rest)

Acceleration due to gravity, g = 9.8 m/s

a. To find the acceleration, we would use the second equation of motion;

[tex] S = ut + \frac{1}{2} at^{2} [/tex]

Where;

S is the distance covered or displacement of an object.

u is the initial velocity.

a is the acceleration.

t is the time.

Substituting the values into the equation, we have;

[tex] 0.93 = 0*35604 + \frac{1}{2} * a*35604^{2} [/tex]

[tex] 0.93 = 0 + \frac{1}{2} * 1267644816a [/tex]

[tex] 0.93 = 633822408a [/tex]

[tex] Acceleration, a = \frac{0.93}{633822408} [/tex]

Acceleration, a = 1.47 * 10^{-9} m/s²

b. To find the mass

Weight = mass * acceleration due to gravity

67 = mass * 1.47 * 10^{-9}

[tex] Acceleration, a = \frac{67}{1.47 * 10^{-9}} [/tex]

Mass = 4.57 * 10^{10} kilograms

c. To find the force;

Force = mass * acceleration

Force = 4.57 * 10^{10} * 1.47 * 10^{-9}

Force = 67.12 Newton

Answer:

d

Explanation:

I'm not perfectly sure so check again

Chlorine has the smallest atomic radius since the atomic radius decreases as you travel to the right and up

Answer:

Un diafragma es una pieza de silicona o de goma reutilizable que cubre el cuello del útero. El diafragma se coloca dentro de la vagina con espermicida antes de tener relaciones sexuales para prevenir un embarazo. El diafragma es un dispositivo anticonceptivo que impide que los espermatozoides ingresen en el útero.

Answer:

The mechanical energy of the cardboard box, M.E. = K.E. + P.E.

Where;

P.E. = The potential energy of the cardboard box = m·g·h

K.E. = The kinetic energy of the cardboard box = (1/2)·m·v²

Where;

m = Mass of the cardboard box

g = The (constant) acceleration due to gravity ≈ 9.81 m/s²

h = The height of the cardboard box

v = The velocity of the cardboard box

At the top of the fall, where h = The height of the platform = [tex]h_{platform}[/tex], and v = 0 (the box is initially at rest at the top), the M.E. is given as follows;

[tex]M.E._{top}[/tex] = P.E. + K.E. = m·g·[tex]h_{platform}[/tex] + (1/2) × m × 0² = m·g·[tex]h_{platform}[/tex]

However, at the bottom of the fall, the height of the box, h = 0, the velocity of the box, v = 0, therefore, the total energy at the bottom, after the box comes to rest, [tex]M.E._{bottom}[/tex] = 0

Therefore;

The total energy of the box at the top of the fall, .[tex]M.E._{top}[/tex] = m·g·[tex]h_{platform}[/tex] was more than the total energy of the box at the bottom of the fall,

[tex]M.E._{bottom}[/tex] = 0

Explanation:

Answer:

when it comes to machines being Rusty oil is like the root loosener

Answer:

Alkaline batteries have longer shelf life than other batteries of the chloride type electrolyte batteries. They have a much higher energy density compared with other batteries. This allows the battery to produce the same energy while lasting longer than other batteries.

Advantage

1) Alkaline battery lasts long than other batteries  

2) It have a  much higher energy density

Disadvantage :

1) They are heavier and bulkier

2) They have high internal resistance

An alkaline battery is a type of primary battery that derives its energy from the reaction between zinc metal and manganese dioxide.

Advantage

Alkaline battery   can produce same amount of energy by lasting longer than other batteries  as it have longer shelf life than  lead acid accumulator​

Alkaline battery  have a much higher energy density compared to lead acid accumulator

Disadvantage :

Alkaline battery  are heavier and bulkier

Alkaline battery   have high internal resistance

learn more about Alkaline battery  

https://brainly.com/question/12580609?referrer=searchResults

#SPJ2

Answer:

When a tree is vigorously shaken, the branches of the tree come in motion but the leaves tend to continue in their state of rest due to inertia of rest. As a result of this, leaves get separated from the branches of the tree and hence fall down.

Answer:

When a tree is vigorously shaken, the branches of the tree come in motion moving left and right and shake the leaves off, that's why some of the tree got detached when we vigorously shake its branch.

Explanation:

Like I did in the answer section.

Answer:

F1=26N and F2=09N ..this is from the two simultaneously equations

Answer:

The three primaryfactors of evaporation are heat, atmospheric pressure (which determines the percentage of moisture) and the movementofair. At the molecular level, there is no strict boundary between the liquid state and the vapor state

Answer:

Đáp án là vị trí để đặt q3 tại vị trí cân bằng là cách A một đoạn 0,0411 m

và nằm trong AB

Explanation:

Do q1 và q2 trái dấu nên q3 nằm trong

gọi r1 là vị trí từ A đến q3 suy ra r2=0.08-r1

Vị trí cân bằng nên [tex]\frac{q1}{r1^{2} }[/tex] = [tex]\frac{q2}{(0.08-r1)^{2} }[/tex]

Answer:

235.6m/s

Explanation:

you have to use one of the kinematic formulas the best that suits the question given in this case you can use v=u+at.since the time, acceleration and initial velocity have been given in the question

v=116+(9.2)13^2

v=116+119.6

=235.6m/s

I hope this helps

Answer:

the specific heat capa city of the aluminium is 900 joules per kilogram per °C.

Am I right please?

Answer:

The answer is "[tex]1.2566 \times 10^{-5}\,rad[/tex]".

Explanation:

As per the Rayleigh Criterion the minimum angular spreading, for a circular aperture:

[tex]\theta_{\mathrm{min}}\approx \sin\theta=1.22\,\frac{\lambda}{d}[/tex]  

[tex]\theta_{\mathrm{min}}=\mathrm{1.22\,\frac{\left( 610\,nm \right)}{\left( 5.90\,cm \right)}=1.22\,\frac{\left( 610\times10^{-9}\,m \right)}{\left( 5.90\times10^{-2}\,m \right)}}[/tex]

                               [tex]=1.22\times 103.389 \times 10^{-7}\\\\=1.22\times 1.03 \times 10^{-5}\\\\=\mathrm{1.2566 \times 10^{-5}\,rad}[/tex]

Answer:

Explanation:

As,

In Option,

A:

There are two same positive ions so they will move away from each other.

B:

There is one negative and positive ion so they will move towards each other.

C:

Again there is one negative and positive ion so they will move towards each other.

D:

Here, there is neutral ions so they will not move and its the correct option.

Answer:

option b is correct..................

Answer:

No,

Explanation:

Efficiency of a machine is always less than 100% as output energy is always less than the input energy, because some energy is lost to overcome friction.

Answer:

DU = 120 Joules

Explanation:

Given the following data;

Quantity of energy = 200 J

Work = 80 J

To find the change in internal energy;

Mathematically, the change in internal energy of a system is given by the formula;

DU = Q - W

Where;

DU is the change in internal energy.

Q is the quantity of energy.

W is the work done.

Substituting into the formula, we have;

DU = 200 - 80

DU = 120 Joules

Answer:

it helps with balance and speed.

"The football shoes have spikes or studs because the studs or spikes provides larger frictional force than normal shoes while running on the grass. The studs prevents player from slipping on the grass and help to run faster and change direction quickly without slipping"

Answer:

they provide a larger frictional force than normal shoes while running on the grass.

Answer: D. places where the magnetic field strength is either greater or less than the expected strength.

Explanation:

Magnetic anomaly refers to the change in the magnitude of the magnetic field of the Eatth with respect to the location's expected value.

Magnetic anomalies are places where the magnetic field strength is either greater or less than the expected strength. Therefore, the correct option is D.

Answer:

La fuerza resultante sobre q₃ es  -1.2245 × 10⁻¹⁵ i  + -0.24 × 10⁻¹⁵ j

La magnitud de la fuerza resultante sobre q₃ es aproximadamente 1.25 × 10⁻¹⁵ N

Explanation:

q₁ = -45 μC = -45 × 10⁻⁶ C

r₁₂ = 30 mm = 30 × 10⁻³ m

q₂ = 25 μC = 25 × 10⁻⁶ C

r₂₃ = 50 mm = 50 × 10⁻³ m

q₃ = 20 μC = 20 × 10⁻⁶ C

k = 9×10⁻⁹ N·m²/C²

Por lo tanto;

r₁₃ = √(50² + 30²) = 10·√(34)

F₁₂ = 9×10⁻⁹ × (-45 × 10⁻⁶)×(25 × 10⁻⁶)/(30 × 10⁻³)² = -1.125 × 10⁻¹⁴

F₁₂ = -1.125 × 10⁻¹⁴ N

F₂₃ = 9×10⁻⁹ × (20 × 10⁻⁶)×(25 × 10⁻⁶)/(50 × 10⁻³)² = 1.8 × 10⁻¹⁵ j

F₁₃ = 9×10⁻⁹ × (-45 × 10⁻⁶)×(20 × 10⁻⁶)/(10·√34 × 10⁻³)² = -2.38× 10⁻¹⁵

Los componentes de F₁₃ son;

-2,38 × 10⁻¹⁵ × cos (arctan (30/50)) = -2,04 × 10⁻¹⁵ j

-2,38 × 10⁻¹⁵ × sin (arctan (30/50)) = -1,2245 × 10⁻¹⁵ i

La fuerza resultante sobre la carga q₃, [tex]\left | \underset {F_3} \rightarrow \right |[/tex] = [tex]\underset{F_{13}}{\rightarrow}[/tex] + [tex]\underset{F_{23}}{\rightarrow}[/tex]

∴ [tex]\left | \underset {F_3} \rightarrow \right |[/tex] = 1.8 × 10⁻¹⁵ j + -1.2245 × 10⁻¹⁵ i + -2.04 × 10⁻¹⁵ j

La fuerza resultante sobre q₃ es [tex]\left | \underset {F_3} \rightarrow \right |[/tex]  = -1.2245 × 10⁻¹⁵ i  + -0.24 × 10⁻¹⁵ j

La magnitud de la fuerza resultante sobre q₃,

[tex]\left | F_3 \right |[/tex] = √((-1.2245 × 10⁻¹⁵)² + (-0.24 × 10⁻¹⁵)²) ≈ 1.25 × 10⁻¹⁵

La magnitud de la fuerza resultante sobre q₃, [tex]\left | F_3 \right |[/tex] ≈ 1.25 × 10⁻¹⁵ N.

Answer:

The Reference standard with which we carry out the measurement of any physical quantity of the same kind is know as unit .

I HOPE I HELP YOU.

Answer:

The standard quantity which is used for the comparison with an unknown quantity is called unit.

Unit is a known or standard quantity in terms of which other physical quantities are measured.

for examples;kilogram,metre,second,etc.

Explanation:

hope it helps you

Answer:

Mass = 0.04 Kg

Explanation:

Given the following data;

Density = 800 kg/m³

Volume = 5 * 10^{-5} m³

To find the mass of the object;

Density can be defined as mass all over the volume of an object.

Simply stated, density is mass per unit volume of an object.

Mathematically, density is given by the formula;

[tex] Density = \frac {mass}{volume} [/tex]

Making mass the subject of formula, we have;

[tex] Mass = density * volume [/tex]

Substituting the values into the formula, we have;

[tex] Mass = 800 * 5 * 10^{-5} [/tex]

Mass = 0.04 Kg