Determine the value of the equilibrium constant for the following reaction, where the following amounts of each species are present at equilibrium in a 5.00 L container: 1.34 mol HCl, 4.30 mol O2, 30 g H2O, and 2.42 mol Cl2.
4 HCl(g) O2(g) ----> 2 H2O(l) 2 Cl2(g)

Answer:

IUPAC Name:

N-ethyl-N-methylaniline

Common Name:

Benzenamine

Answer:

since the concentration of limiting reactant are the same for both nickel and hydrochloric acid, they both will produce the same amount if Nickel Chloride

7 mols of [tex]NiCl_2[/tex] formed in a reaction of 7 mol of Ni and 14 mol of HCl.

The moles of Ni = 7 mol

The mols of HCl = 14 mol

It is required to calculate moles of [tex]NiCl_2[/tex]

A mole corresponds to the mass of a substance that contains [tex]6.023 \times 10^{23}[/tex]particles of the substance. The mole is the SI unit for the amount of a substance. Its symbol is mol.

The reaction of Ni and HCl occurs as

[tex]Ni +2 HCl \to NiCl_2 + H_2[/tex]

Since the concentration of limiting reactant are the same for both nickel and hydrochloric acid, they both will produce the same amount of Nickel Chloride.

If we have 7 mols of Ni and 14 mols of HCl, then when the 7 moles of Ni has reacted, we will still have 7 moles of HCl unreacted.

So, the moles of [tex]NiCl_2[/tex] formed equal to the moles of Ni and HCl reacted.

Therefore, 7 mols of [tex]NiCl_2[/tex] formed in a reaction of 7 mol of Ni and 14 mol of HCl.

To learn more about moles, click here:

https://brainly.com/question/15209553

Explanation:

here's the answer to your question

2.0 L

Answer:

Solution given:

no. of mole(n)=3.0mole

molarity(M)=1.5M

we have

Volume of a substance is equal to the ratio of its no of mole to its molarity.

By this we get a relation:

Volume=no.of mole/molarity

substituting value

Volume=3.0/1.5=2

The required volume is 2 litre.

Answer:

force exerted per unit area by gas particles as they strike the surfaces around them

Explanation:

According to the kinetic molecular theory, a gas is composed of molecules. The molecules of a gas are in constant random motion and collide frequently with each other as well as with the walls of the container.

Pressure is defined as force per unit area. The pressure of a gas is the force exerted per unit area by gas particles as they strike the surfaces around them hence the answer above.

Answer:

H-C = C-H NaNH2 [tex]\ \to \0}[/tex] H-C = CNa

H-C = C - CH2 CH2 CH2 CH3

Explanation:

NaNH2 acts as base in this reaction. The organic products released after the reaction of carbon hydrogen atom with sodium amide. These products released after the chemical reaction when carbon and hydrogen atom reacts and NaNH2 acts as base then substitution nucleophilic reaction takes place.

Answer:

Nitrogen does not show allotropy because of its small size and high electronegativity. The single N-N bond is weaker than P-P bond because of high inter electronic repulsions among non-bonding electrons due to the small bond distance. Hence it does not show allotropy.

Answer:

The nitrogen atom has short inter-bond distance, hence highly electronegative in terms of magnitude. This creates no relation in energy varieties hence no allotropes formed.

Nitrogen atom is also very small.

Solution :

We know that :

[tex]$\Delta T_f = k_f.m$[/tex]  and   [tex]$m=\frac{w_2}{m_2 \times w_1}$[/tex]

Then, [tex]$\Delta T_f = k_f.\frac{w_2}{m_2.w_1}$[/tex]   ..................(1)

Where,

[tex]w_1[/tex] = amount of solvent (in kg)

[tex]w_2[/tex] = amount of solute (in kg)

[tex]m_2[/tex] = molar mass of solute (g/mole)

[tex]m[/tex] = molality of solution (mole/kg)

Given :

[tex]\Delta T_f[/tex] = [tex]3.14\ ^\circ C[/tex],   [tex]k_f= 5.12\ ^\circ C/m[/tex]

                              [tex]=5.12 \ ^\circ C/mole/kg[/tex]

                              [tex]=5.12 \ ^\circ C \ kg/mole[/tex]

[tex]w_1[/tex] = 0.250 kg,  [tex]w_2[/tex] = 24.3 g

Then putting this values in the equation is (1),

[tex]$3.14 = \frac{5.12 \times 24.3}{m_2 \times 0.250}$[/tex]

[tex]$m_2 = \frac{5.12 \times 24.3}{3.14 \times 0.250}$[/tex]

[tex]m_2= 158.49[/tex]  g/mole

So, the molar mass of the unknown compound is 158.49 g/mole.

Answer:

A. filtration

Hope it helps

From each of the protein structures listed, the option with the highest level of protein structure as regards with order of amino acids and overall macromolecule structure is quaternary structure. That is option D.

The protein one of the essential nutrients that is found in and consumed by mammals.

There are different types of proteins and their functions depends on their shape, structure or conformation.

The structure of proteins include:

Therefore, the option with the highest level of protein structure as regards with order of amino acids and overall macromolecule structure is quaternary structure.

Learn more here:

https://brainly.com/question/18159696

Answer:

[SO4²⁻] = 0.015M

Explanation:

When H2SO4 is dissolved in water, HSO4- is produced in a direct reaction as follows:

H2SO4 → HSO4- + H+

As 1 mole of H2SO4 produce 1 mole of HSO4-, the molarity of HSO4- in this first reaction is 0.034M

Now, the HSO4- is in equilibrium with SO42- and H+ as follows:

HSO4⁻ ⇄ SO4²⁻ + H⁺

Where the equilibrium constant, K, is defined as:

K = 1.2x10⁻² = [SO4²⁻] [H⁺] / [HSO4⁻]

Where [] are the equilibrium concentrations of each species in the reaction.

The equilibrium concentrations are:

[SO4²⁻] = X

[H⁺] = X

[HSO4⁻] = 0.034M - X

Where X is reaction coordinate

Replacing:

1.2x10⁻² = [X] [X] / [0.034-X]

4.08x10⁻⁴ - 1.2x10⁻²X = X²

4.08x10⁻⁴ - 1.2x10⁻²X - X² = 0

Solving for X:

X = -0.027M. False solution, there are no negative concentrations.

X = 0.015M. Right solution.

That means the equilibrium molarity of SO4²⁻,

[SO4²⁻] = X

Answer:

Sodium acetate is NaC2H3O2

Answer:

The answer is A for the lazy people.

Answer:

25.88 g/mol

Explanation:

Graham's law is a famous law which states that the diffusion rate or the effusion rate of any gas varies inversely to the square root of the molecular weight the gas.

So from Graham's law, we have,

[tex]$\frac{\text{time}}{M^{1/2}}=\text{constant}$[/tex]

Using the sample of Kr gas having M = 83.8

[tex]$\frac{8.15}{(83.8)^{0.5}}= \frac{4.53}{M^{0.5}}$[/tex]

[tex]$M^{0.5}= 5.088$[/tex]

M = 25.88 g/mol

Answer:

pH = 3.02

Explanation:

Acetic Acid is a weak acid (HOAc) that ionizes only ~1.5% as follows:

HOAc ⇄ H⁺ + OAc⁻.

In pure water the hydronium ion concentration [H⁺] equals the acetate ion concentration [OAc⁻] and can be determined* using the formula [H⁺] = [OAc⁻] = SqrRt(Ka·[acid]) = SqrRt(1.8x10⁻⁵ x 0.0500)M = 9.5x10⁻⁴M.

By definition, pH = -log[H⁺] = -log(9.5x10⁻⁴) = 3.02

______________________________________________________

*This formula can be used to determine the [H⁺] & [Anion⁻] concentrations for any weak acid in pure water given its Ka-value and the molar concentration of acid in solution.

Answer:

Explanation:

This apparent disparity of the free energy can be taken into account because:

the free energy produced by the hydrolysis of one ATP is adequate enough under psychological circumstances.

The Na-K ATPase aids the pumping of Na+ ions out of the cell and K+ ions into the cell. These actions occurring against their potential(concentration) gradients, which may be produced by hydrolyzing one ATP molecule.

Answer:

[tex]n_1=4[/tex]

Explanation:

From the question we are told that:

Wavelength [tex]\lambda=489.2 nm =>4.86*10^{-7}[/tex]

nf level= Balmer series

nf level= 2

Generally the equation for Wavelength is mathematically given by

[tex]\frac{1}{\lambda}=R[\frac{1}{nf^2}-\frac{1}{n_1^2}][/tex]

Where

[tex]R=Rydberg Constant[/tex]

[tex]R=1.097*10^7[/tex]

Therefore

[tex]\frac{1}{4.86*10^{-7}}=1.097*10^7[\frac{1}{2^2}-\frac{1}{n_1^2}][/tex]

[tex]n_1=4.0021[/tex]

[tex]n_1=4[/tex]

Complete Question  

Complete Question is attached below

Answer:

Option A

[tex]D=A[/tex] And [tex]C>A[/tex]

Explanation:

From the question, we are told that:

The Chemical Reaction

 [tex]2A_{aq}+B_{aq} \leftrightarrow 3C_{aq}+2D_{aq}[/tex]

Generally, the equation for Equilibrium constant is mathematically given by

 [tex]K=\frac{C^c*D^d}{A^a*B^b}[/tex]

Therefore

 [tex]K=\frac{C^3*D^d}{A^2*B^b}[/tex]

Hence we conculde

 [tex]D=A[/tex] And [tex]C>A[/tex]

Therefore Option A

Explanation:

here's the answer to your question

Iodine's neutral atom has the following electronic configuration: 1 s² 2 s² 2 p⁶ 3 s² 3 p⁶ 4 s² 3 d¹⁰ 4 p⁶ 5 s² 4 d¹⁰ 5 p⁵. The complete ground-state electron configuration of I⁻ is  [Kr]5s² 4d¹⁰ 5p⁶.

Electronic configuration is defined as each electron moves individually within an orbital while being surrounded by an average field produced by all other orbitals. The electron configuration is used to describe an atom's ground state orbitals, but it may also be used to depict an atom that has ionized into a cation or anion by making up for any lost or gained electrons in the orbitals after it.

The ground state electronic configuration is defined as the configuration of lower energy electrons surrounding an atom's nucleus. Ground state is defined as the least energetic state feasible for a physical system.  It is important because permits us to determine the location of the excited electrons' departure and return when they release a photon.

Thus, iodine's neutral atom has the following electronic configuration: 1 s² 2 s² 2 p⁶ 3 s² 3 p⁶ 4 s² 3 d¹⁰ 4 p⁶ 5 s² 4 d¹⁰ 5 p⁵. The complete ground-state electron configuration of I⁻ is  [Kr]5s² 4d¹⁰ 5p⁶.

To learn more about electronic configuration, refer to the link below:

https://brainly.com/question/14283892

#SPJ2

An indicator usually signals the endpoint of a neutralization reaction by undergoing a color change. They aid in discovering the point of equivalence of a titration.

The kind of indicator used depends on the nature of acid/base reacted.

In the case of  CH3NH2 with HBr which  strong acid and weak base titration, suitable indicators include; bromophenol blue, methyl  orange, methyl red, and chlorophenol blue.

In the case of HNO3 with NaOH, this is a strong acid, strong base titration hence phenolphthalein, methyl red, chlorophenol, and bromothymol blue cresol red blue are suitable indicators.

In the case of  HNO2 with KOH, this a weak acid, strong base titration and the suitable indicators are cresol red and  phenolphthalein.  

For more information on titration see

https://brainly.com/question/22536636

Answer:

Alpha and beta particles originate from the nucleus, protection from radiation is important because if the radiation passes through the body it can damage cells. Exposure to radiation is often limited by increasing the distance from the radioactive source.

Explanation:  

Answer:

C

Oxygen gas is limiting.

C(s) + O

2

→CO

2

(g)

No. of moles of carbon =

12

36

=3 moles

No. of moles of oxygen =

32

32

=1 moles

So, 2 moles of carbon is left and oxygen will be completed.

So, O

2

is limiting reagent.

Answer:

14.5

Explanation:

not sure how I got it but I hope this helped!

If K is greater than 1, then products are favored

Answer:

See explanation

Explanation:

The work function of a metal is defined as that minimum energy which is required to remove one electron from the surface of a metal when it is irradiated with a photon of light. The work function is different for different metals.

The ionization energy of a metal is the energy required to remove an electron from an atom. It depends on the position of the electron within the atom.

The work function specifically refers to the energy required to remove an electron from the conduction band of a metal. Hence, the work function is always lower than the ionization energy.

Answer:

12.5 %

Explanation:

In CCP, the effective number of anion is 4

That is there are 4 I- present in 1 unit cell

Number of tetrahedral void = 2*effective number of anion

= 2*4

= 8

In ZrI4, for every 4 anion, there are only 1 Zr atom.

So, one tetrahedral void is occupied per unit cell out of 8

% tetrahedral void occupied = 1*100/8

= 12.5 %

Answer: 12.5 %

a) HNO₂ + C₂H₇NO → N₂ + C₂H₆O + H₂O

b) H₃O⁺ + F⁻ → HF + H₂O

[tex]\large\color{lime}\boxed{\colorbox{black}{Answer : - }}[/tex]

a) HNO₂ + C₂H₇NO → N₂ + C₂H₆O + H₂O

b) H₃O⁺ + F⁻ → HF + H₂O

Answer:

c. 2,2-dichloropentane.

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to firstly draw the structure of the reactant, pent-1-yne:

[tex]CH\equiv C-CH_2-CH_2-CH_2[/tex]

Now, we infer the halogen is added to the carbon atom with the most carbon atoms next to it, in this case, carbon #2, in order to write the following product:

[tex]CH\equiv C-CH_2-CH_2-CH_2+2HCl\rightarrow CH_3- CCl_2-CH_2-CH_2-CH_2[/tex]

Whose name is 2,2-dichloropentane.

Regards!

Answer:

Remove 1 electron

Explanation:

In the atom of each element, there are three subatomic particles viz: proton, neutron and electron. The number of proton (positively charged) and electron (negatively charged) determines the charge of that element. The more the proton, the more positively charged an ion is and vice versa for electron.

According to this question, a neutral atom of lithium (Li) with atomic no. 3 is given i.e. a lithium atom with charge 0. To make the lithium atom's charge change to +1, ONE ELECTRON MUST BE REMOVED OR LOST.

Note that, the proton number (atomic number) of an element does not change, rather the electron number changes in relation to the no. of protons.

Answer:

See explanation and image attached

Explanation:

Methyl butanoate is an ester. Esters have the general molecular formula, RCOOR where the two Rs may represent the same or different alkyl groups.

Methyl butanoate is has a fruity odor, smelling like apples or pineapples fragrance. It is also called methyl butyrate.

The structure of the compound is shown in the image attached to this answer.

Answer:

Both substances undergo substitution reactions.

Explanation:

Let us go back to the idea of aromaticity. Aromatic substances are said to possess (4n + 2) π electrons according to Huckel rule.

Aromatic substances are unusually stable and the aromatic ring can not be destroyed by addition reactions.

Since both benzene and cyclooctatetraene are both aromatic, they do not undergo addition reactions whereby the aromatic ring is destroyed. They both undergo substitution reaction in which the aromatic ring is maintained.