Dagmar says that diffusion happens really quickly. Is he right or wrong? Explain.

Answer:

the distance of the fish (as  seen by the bird) is greater than the actual distance.

Reason-

it is due to the apparent depth and differences between the refractive indices.

Have a nice day!

Answer:

The current is more in the parallel combination than in the series combination.

Explanation:

two resistances, R1 and R2 are connected to a battery of voltage V.

When they are in series,

R = R1 + R2

In series combination, the current is same in both the resistors, and it is given by Ohm's law.

V = I (R1 + R2)

[tex]I = \frac{V}{R_1 + R_2}[/tex]..... (1)

When they are connected in parallel.

the voltage is same in each resistor.

The effective resistance is R.

[tex]R = \frac{R_1R_2}{R_1 + R_2}[/tex]

So, the current is

[tex]I = \frac{V(R_1+R_2)}{R_1 R_2}[/tex]..... (2)

So, the current is more is the parallel combination.

Explanation:

The density of earth [tex]\rho_E[/tex] is given by

[tex]\rho_E = \dfrac{M_E}{\left(\frac{4\pi}{3}R_E^3\right)}[/tex]

and in terms of this density, we can write the acceleration due to gravity on earth as

[tex]g_E =G\dfrac{M_E}{R_E^2} = \dfrac{4\pi G}{3}\rho_ER_E[/tex]

Similarly, the acceleration due to gravity [tex]g_P[/tex] on this new planet is given by

[tex]g_P = G\dfrac{M_P}{R_P^2} = G\dfrac{\frac{4\pi}{3}R_p^3\rho_P}{R_P^2}[/tex]

[tex]\:\:\:\:\:= \dfrac{4\pi G}{3}\rho_PR_P[/tex]

We know that this planet has the same density as earth and has a radius 2 times as large. We can then rewrite [tex]g_P[/tex] as

[tex]g_P = \dfrac{4\pi G}{3}\rho_E(2R_E)[/tex]

[tex]\:\:\:\:\:= 2\left(\dfrac{4\pi G}{3}\rho_ER_E\right) = 2g_E[/tex]

[tex]\:\:\:\:\:= 2(9.8\:\text{m/s}^2) = 19.6\:\text{m/s}^2[/tex]

Answer:

The constant minimum deceleration required to stop the car in time to avoid pileup is 6.32 m/s²

Explanation:

From the question, the car is traveling at 118 km/h, that is the initial velocity, u = 118km/h

The distance between the car and the accident at the moment when the driver sees the accident is 85 m, that is s = 85 ,

Since the driver slams on the brakes and the car will come to a stop, then the final velocity, v = 0 km/h = 0 m/s

First, convert 118 km/h to m/s

118 km/h = (118 × 1000) /3600 = 32.7778 m/s

∴ u = 32.7778 m/s

Now, to determine the deceleration, a, required to stop,

From one of the equations of motion for linear motion,

v² = u² + 2as

Then

0² = (32.7778)² + 2×a×85

0 = 1074.3841 + 170a

∴ 170a = - 1074.3841

a = - 1074.3841 / 170

a = - 6.3199

a ≅ - 6.32 m/s²

Hence, the constant minimum deceleration required to stop the car in time to avoid pileup is 6.32 m/s²

Using the left-hand rule,

[tex](4\,\vec\imath+\vec k)\times(2\,\vec\imath+\vec\jmath-3\,\vec k) = \begin{vmatrix}\vec\imath&\vec\jmath&\vec k\\4&0&1\\2&1&-3\end{vmatrix} = -\vec\imath+14\,\vec\jmath+4\,\vec k[/tex]

Then in the right-handed rectangular coordinates, the cross product is the negative of this,

[tex]\boxed{\vec\imath-14\,\vec\jmath-4\,\vec k}[/tex]

Answer:

Lateral inversion will occur in a plane mirror.

Explanation:

When words are displayed in a plane or flat mirror, the result is that if the words are displayed left, they change to right and if they were normally displayed right, they change to left. This phenomenon is known as lateral inversion. So, this will apply to the words, Science and optics. Only the sides will be interchanged.

A plane mirror reflects light, therefore, the image that is produced by it remains the same size. The image produced will not appear upside down. Only the sides will be interchanged.

The question is incomplete. The complete question is :

A dielectric-filled parallel-plate capacitor has plate area A = 10.0 cm2 , plate separation d = 10.0 mm and dielectric constant k = 3.00. The capacitor is connected to a battery that creates a constant voltage V = 15.0 V . Throughout the problem, use ϵ0 = 8.85×10−12 C2/N⋅m2 .

Find the energy U1 of the dielectric-filled capacitor. I got U1=2.99*10^-10 J which I know is correct. Now I need these:

1. The dielectric plate is now slowly pulled out of the capacitor, which remains connected to the battery. Find the energy U2 of the capacitor at the moment when the capacitor is half-filled with the dielectric.

2. The capacitor is now disconnected from the battery, and the dielectric plate is slowly removed the rest of the way out of the capacitor. Find the new energy of the capacitor, U3.

Solution :

Given :

[tex]A = 10 \ cm^2[/tex]

   [tex]$=0.0010 \ m^2$[/tex]

d = 10 mm

  = 0.010 m

Then, Capacitance,

[tex]$C=\frac{k \epsilon_0 A}{d}$[/tex]

[tex]$C=\frac{8.85 \times 10^{12} \times 3 \times 0.0010}{0.010}$[/tex]

[tex]$C=2.655 \times 10^{12} \ F$[/tex]

[tex]$U_1 = \frac{1}{2}CV^2$[/tex]

[tex]$U_1 = \frac{1}{2} \times 2.655 \times 10^{-12} \times (15V)^2$[/tex]

[tex]$U_1=2.987 \times 10^{-10}\ J$[/tex]

Now,

[tex]$C_k=\frac{1}{2} \frac{k \epsilon_0}{d} \times \frac{A}{2}$[/tex]

And

[tex]$C_{air}=\frac{1}{2} \frac{\epsilon_0}{d} \times \frac{A}{2}$[/tex]

In parallel combination,

[tex]$C_{eq}= C_k + C_{air}$[/tex]

[tex]$C_{eq} = \frac{1}{2} \frac{\epsilon_0 A}{d}(1+k)$[/tex]

[tex]$C_{eq} = \frac{1}{2} \times \frac{8.85 \times 10^{-12} \times 0.0010}{0.01} \times (1+3)$[/tex]

[tex]$C_{eq} = 1.77 \times 10^{-12}\ F$[/tex]

Then energy,

[tex]$U_2 =\frac{1}{2} C_{eq} V^2$[/tex]

[tex]$U_2=\frac{1}{2} \times 1.77 \times 10^{-12} \times (15V)^2$[/tex]

[tex]$U_2=1.99 \times 10^{-10} \ J$[/tex]

b). Now the charge on the [tex]\text{capacitor}[/tex] is :

[tex]$Q=C_{eq} V$[/tex]

[tex]$Q = 1.77 \times 10^{-12} \times 15 V$[/tex]

[tex]$Q = 26.55 \times 10^{-12} \ C$[/tex]

Now when the capacitor gets disconnected from battery and the [tex]\text{dielectric}[/tex] is slowly [tex]\text{removed the rest}[/tex] of the way out of the [tex]\text{capacitor}[/tex] is :

[tex]$C_3=\frac{A \epsilon_0}{d}$[/tex]

[tex]$C_3 = \frac{0.0010 \times 8.85 \times 10^{-12}}{0.01}$[/tex]

[tex]$C_3=0.885 \times 10^{-12} \ F$[/tex]

[tex]$C_3 = 0.885 \times 10^{-12} \ F$[/tex]

Without the dielectric,

[tex]$U_3=\frac{1}{2} \frac{Q^2}{C}$[/tex]

[tex]$U_3=\frac{1}{2} \times \frac{(25.55 \times 10^{-12})^2}{0.885 \times 10^{-12}}$[/tex]

[tex]$U_3=3.98 \times 10^{-10} \ J$[/tex]

Answer:

Option (a) is correct.

Explanation:

The lines in the emission spectrum of hydrogen is due to the transfer of electrons form higher energy levels to the lower energy levels.

When the electrons transfer from one level of energy that is higher level of energy to the other means to the lower level of energy then they emit some photons which having the frequency or the wavelength in the visible region.

Answer:

simple is rumple a daily ok I'll be

Answer:

4.56×10¯⁷¹ N

Explanation:

From the question given above, the following data were obtained:

Distance apart (r) = 1.10 m

Force (F) =?

NOTE:

Gravitational constant (G) = 6.67×10¯¹¹ Nm² /Kg²

Mass of electron = 9.1×10¯³¹ Kg

Mass of the two elections = M₁ = M₂ = 9.1×10¯³¹ Kg

Thus, we can obtain the force of attraction between the two elections as illustrated below:

F = GM₁M₂ / r²

F = 6.67×10¯¹¹ × (9.1×10¯³¹)² / (1.1)²

F = 4.56×10¯⁷¹ N

Thus, the force of attraction between the two elections is 4.56×10¯⁷¹ N

Answer:

T = 1/f = 1/50(s)

ω = 2πf = 100π (rad/s)

(vote 5 sao nhó :3 )

Answer:

The speed of bullet is 354.2 m/s

Explanation:

initial temperature, T = 30 degree C

specific heat, c = 128 J/kg K

Latent heat, L = 24.7 x 1000 J/kg

melting point = 600 K = 327 degree C

Let the mass is m and the speed is v.

Kinetic energy = heat used to increase the temperature + Heat used to melt

[tex]\frac{1}{2} mv^2 = m c (T' - T) + m L\\\\0.5 v^2 = 128 \times (327 - 30) + 24.7\times 1000\\\\0.5 v^2 = 38016 + 24700 \\\\0.5 v^2 = 62716\\\\v = 354.2 m/s[/tex]

Answer:

The rms voltage of new generator is 3.4 V.

Explanation:

f = 3200 Hz

rms voltage, V = 2 V

rms current, i = 28 mA

Now

f' = 4700 Hz

rms current, i' = 70 mA

let the new rms voltage is V'.

[tex]i = \frac{V}{Xc} = V \times 2\pi fC....(1)\\\\i' = V' \times 2 \pi f' C..... (2)\\\\\frac{i}{i'} =\frac{V f}{V' f'}\\\\\frac{28}{70}=\frac{2\times 3200}{V'\times 4700}\\\\V' = 3.4 V[/tex]

Answer:

[tex]\boxed {\boxed {\sf 2 \ m/s^2}}[/tex]

Explanation:

Acceleration is the rate of change in velocity with respect to time. It is calculated by dividing the change in velocity by the change in time. The formula is:

[tex]a= \frac{ \Delta v}{\Delta t}[/tex]         or          [tex]a= \frac{v_f-v_i}{\Delta t}[/tex]

The change in velocity is the difference between the initial velocity and the final velocity. The motorcycle starts at rest, or 0 meters per second and reaches 6 meters per second. The change in time is 3 seconds.

[tex]\bullet \ v_f= 6 \ m/s\\\bullet \ v_i= 0 \ m/s \\\bullet \ \Delta t = 3 \ s[/tex]

Substitute the values into the formula

[tex]a= \frac { 6 \ m/s - 0 m/s}{3 \ s}[/tex]

Solve the numerator.

[tex]a= \frac{6 \ m/s}{3 \ s}[/tex]

[tex]a= 2 \ m/s^2[/tex]

The motorcyclist's acceleration is 2 meters per second squared.

Answer:

  Dr = 263 10⁻⁶ m

Explanation:

The diffraction pattern for constructive interference is described by

        a sin θ = m λ

in this it indicates that the order of diffraction is m = 1

Let's use a direct proportion rule to find the separation of two slits. If there are 600 lines in 1 me, what is the distance between 2 slits

   a = 2 lines 1/600

   a = 2/600

    a = 3.33 10⁻³ mm = 3.33 10⁻⁴ cm

let's use trigonometry

      tan θ = y / L

as the measured angles are small

      tan θ = sin θ / cos θ sin θ

      sin θ = y / L

we substitute

     a  y/L = λ

     y = λ L / a

for λ = 400 10-9 m

      I = 400 10⁻⁹ 2.9 / 3.33 10⁻³

      i = 346.89 10⁻⁶ m

f

or λ = 700 nm

        y_f = 700 10⁻⁻⁹ 2.9 / 3.33 10⁻³

        y_f = 609.609 10⁻⁶ m

the separation of this spectrum

        Δr = v_f - i

        Dr = (609.609 - 346)  10 ⁻⁶

        Dr = 263 10⁻⁶ m

Answer:

a circular motion a constant force can be measured

Explanation:

The force is expressed by the relation

         F = m a

The bold are vectros.

Therefore, when your partner moves away, he has a reading of a force, so that this force remains constant there must be an acceleration at all times, one way to achieve these is with a circular motion with constant speed, in this case the module of the velocity is constant, but the direction changes at each point and there is an acceleration at each point.

Consequently with a circular motion a constant force can be measured

The force depends on the acceleration, hence the force will be constant during the circular motion for constant acceleration.

A force can be defined as an influence that can change the motion of an object. The force is expressed by the relation

[tex]F = m a[/tex]

The force is dependent on the mass and acceleration of the object. The acceleration is a vector quantity, so the force will be a vector quantity.

Given that, in a lab room, you are sitting on a wheelchair at one end and at the other end, lab partner then moves away from you, pulling on the string that is attached to the force sensor.

When the lab partner moves away and pulled the string, there must be an acceleration during the motion. If the lab partner moves in a circular motion, then the velocity is constant but the direction changes at each point. There is an acceleration at each point that will be constant.  

As the force depends on the acceleration, hence the force will be constant during the circular motion for constant acceleration.

To know more about the force, follow the link given below.

https://brainly.com/question/26115859.

Answer:

the force happens on the wall and couch

Explanation:

she is using her arm strength to lift and hold

Answer:

30ms

Explanation:

you need to multiple the 10ms by 3s which gives you 30ms

Answer:

A hypothesis for the period of a pendulum is:

"The period of the pendulum varies with its length"

Explanation:

A hypothesis for the period of a pendulum is:

"The period of the pendulum varies with its length"

To test this hypothesis we can carry out a measurement of a simple pendulum keeping the angle fixed, in general the angle used is about 5º since when placing this value in radiand and the sine of this angle they differ little <5%. therefore measured the time of some oscillations, for example about 10 oscillations, changing the length of the pendulum to test the hypothesis.

If the hypothesis and the model used is correct, the relationship to be tested is

              T² =(4π² /g)   L  

by making a graph of the period squared against the length if obtaining, os a line, the hypothesis is tested.

We know

[tex]\boxed{\sf E=hv}[/tex]

[tex]\\ \sf\longmapsto E=6.63\times 10^{-34}J\times 3.6\times 10^{15}s^{-1}[/tex]

[tex]\\ \sf\longmapsto E=23.86\times 10^{-19}J[/tex]

[tex]\\ \sf\longmapsto E=2.38\times 10^{-18}J[/tex]

[tex]\\ \sf\longmapsto E=2.4\times 10^{-18}J[/tex]

Answer:

D!!!!!

Explanation:

Answer:

D) 1003 N​

Explanation:

Given the following data;

Mass of man = 85 kg

Acceleration of elevator = 2 m/s²

Acceleration due to gravity, g = 9.8 m/s²

To find the force exerted by the man on the floor;

Force = mg + ma

Answer:

5.71×10¹⁴ Hz

Explanation:

Applying,

v = λf................. Equation 1

Where v = speed of the electromagnetic radiation, λ = wavelength of the electromagnetic radiation, f = frequency

make f the subject of the equation

f = v/λ............. Equation 2

From the question,

Given: λ = 525 nm = 5.25×10⁻⁷ m,

Constant: Speed of electromagnetic wave (v) = 3.0×10⁸ m/s

Substitute these values into equation 2

f = (3.0×10⁸)/(5.25×10⁻⁷)

f = 5.71×10¹⁴ Hz

Hence the frequency of light is 5.71×10¹⁴ Hz

Answer: [tex]1361.11\ N/C,\text{upward}[/tex]

Explanation:

Given

Mass of particle is [tex]m=2.5\ gm[/tex]

Charge of particle is [tex]q=18\ \mu C[/tex]

Electrostatic force must balance the weight of the particle

[tex]\lim_{n \to \infty} a_n \Rightarrow mg=qE\\\\\Rightarrow E=\dfrac{2.5\times 9.8\times 10^{-3}}{18\times 10^{-6}}\\\\\Rightarrow E=1361.1\ N/C[/tex]

Direction of the electric field is in upward direction such that it opposes the gravity force.

Answer:

1231

Explanation:

Answer:

When an object covers equal distance in an equal interval of time, it is uniform motion but when an object covers unequal distance in an equal interval of time, it is called non uniform motion.

The intensity of radiation is the defined as amount of energy per surface angle which can be used to determine the amount of energy emitting from a source that will hit another surface.

The factors that affect the intensity of radiation are

Type of emission from the source :This  can be alpha, gamma, beta or electromagnetic rays etc

Distance of the detector from the source: The shorter the distance between the source and the detector, the more the effect and vice versa for the longer the distance.

Type of materials between the source and the detector: The type of material between the source and the detector will tell how absorbing and penetrating the radiation is.

Read more on Radiation Intensity here:  https://brainly.com/question/10148635

Answer:

Speed=28.1m/s(to 3s.f.) , Time=2.19s(to 3s.f.)

Explanation:

Time=Distance/Speed

=14.5/6.63

=2.19s(to 3s.f.)

Acceleration=Final Velocity(v)-Initial Velocity(u)/Time

9.81=v-6.63/2.19

v-6.63=21.5

v=28.1m/s

Answer:

F' = 128 N

Explanation:

The electrostatic force of attraction between two charges is given by Colomb's Law, as follows:

[tex]F = \frac{kq_1q_2}{r^2}\\\\[/tex]

where,

F = Force of attraction = 1 N

G = universal gravitational constant

q₁ = magnitude of the first charge

q₂ = magnitude of the second charge

r = distance between charges

Therefore,

[tex]1\ N = \frac{kq_1q_2}{r^2}[/tex] --------------------- eq(1)

Now, we apply the changes given in the question:

[tex]F' = \frac{k(2q_1)(4q_2)}{(\frac{1}{4}r)^2}\\\\F' = 128(\frac{kq_1q_2}{r^2})[/tex]

using eq (1):

F' = 128(1 N)

F' = 128 N