Answer: 100 milligrams per dose
10 mg per kg. The drug of ten kilos so you do
10 mg * 10 kg = 100 mg per dose
Explanation:
A 30:70 (mole %) ratio of acetone:water is heated to 54.36 ∘C at 760 mmHg. What is the total vapor pressure of the system? The vapor pressures for acetone and water at 54.36 ∘C are 712 mmHg and 154 mmHg respectively.
Answer:
numbers
Explanation:
idek im just bored
A.
Select the correct structure that
corresponds to the name.
heptane
B.
CH3(CH2)4CH3
Answer:
Only A., the stick structure with no branches and five vertices between the two endpoints.
Explanation:
An alkane is a saturated hydrocarbon compound with no branches- just a series of carbon atoms connected with [tex]{\rm C}-{\rm C}[/tex] single bonds. Heptane is the name for an alkane with [tex]7[/tex] carbon atoms (the prefix "[tex]\verb!hept-![/tex]" means "seven".)
Notice that there are only [tex]6[/tex] carbon atoms in the alkane with the condensed structure formula [tex]{\rm CH_{3}}({\rm CH_{2})_{4}{\rm CH_{3}}[/tex]. The name for that structure would be hexane, not heptane.
In general, the condensed structure formula of an alkane with [tex]n[/tex] carbon atoms ([tex]n > 2[/tex]) is [tex]{\rm CH_{3}}({\rm CH_{2}})_{n-2} {\rm CH_{3}}[/tex]. The correct condensed structure formula for heptane ([tex]n = 7[/tex]) would be [tex]{\rm CH_{3}}({\rm CH_{2}})_{5} {\rm CH_{3}}[/tex].
The structure in choice A is represented as a line-angle formula. As long as no letter is present in the formula, each vertex in the line-angle formula (including the endpoints) represents a carbon atom. Hence, the line-angle formula in choice A would represent a hydrocarbon with [tex]7[/tex] carbon atoms.
A single line denotes a single bond between atoms. All [tex]7[/tex] carbon atoms in this structure are thus joined in a line with [tex]{\rm C}-{\rm C}[/tex] single bonds. Hence, this structure denotes an alkane with [tex]7[/tex] carbon atoms- heptane.
A certain compound is made up of one carbon (C) atom, two chloride (Cl) atoms and one oxygen (o) atom what is the chemical formula of this compound
CO(Cl)2 will be the formula which has a common name of phosgene a highly poisonous gas .
In CuCl2(aq), the solvent is _____.
Answer: water
Explanation:
In aqueous solutions, water is the solvent.
A 1.5 kg rock and a 15 kg book are dropped from rest from the same
height at the same time. In the absence of air resistance, which one will
hit the ground first?
This is an impossible formula. If it were real, determine the molar mass of:
Fe1S1O5
The molar mass of the ammonium lauryl sulfate is 283.43 g/mol.
What is Ammonium lauryl sulfate?It is also called ammonium dodecyl sulfate. It is used in shampoos we use for hair. It can be dissolved in both polar and non-polar solvent. It can cause skin irritation sometimes.
Thus, the molar mass of the ammonium lauryl sulfate is 283.43 g/mol.
Learn more about Ammonium lauryl sulfate
https://brainly.com/question/16483020
#SPJ1
28.25 What two aldoses yield D-xylose on Wohl degradation?
56.5
Explanation:
the degradation would be 28.25 times 2
HBr + H,SO, - SO, + Br, + H,O
Did S change oxidation number?
Answer:
I think the answer might be yes..
(b) Washing soda crystals react with acid to give off carbon dioxide.
If you added some washing soda crystals to vinegar,
what would you see happening?
The same elements may combine in different ratios to form the same compound?
Answer:
law of multiple proportion
Explanation:
Complete the chemical equations and balance them
HCl + KOH → __________ + ____________
H₃PO₄ + NaOH→__________ + ____________
H₂CO₃+ Ca(OH)₂→__________ + ____________
Answer:
KCl+H2O
Na3PO+H2O
CaCO3+H2O
4Na(s)=+O2(g)->2NA2)(s)
How many grams of Na2O is produced when 57.5g an Na reacts
Select the Coral Reef Tab. Make sure that you have clicked Return to original settings and Restart. Set the Ocean Temperature to 33 Degrees Celsius. Click Advance year 10 times. What changes do you notice?
Answer:
What changes do you notice? The white you see have undergone coral bleaching. At high temperatures, corals may lose their zooxanthellae, causing corals to lose their color and their main source of food. Once bleaching occurs, the coral colony usually dies.
Explanation:
study well
Arigato
Which statement about compounds and molecules is correct?
O All compounds are molecules.
O All molecules are compounds.
O Compounds are composed of molecules bonded together.
O Molecules are composed of compounds bonded together.
Answer: Compounds are composed of molecules bonded together.
The statement about compounds and molecules is correct is compounds are composed of molecules bonded together. Therefore, option C is correct.
What are compound ?The term compound is defined as a substance made from two or more different elements that have been chemically attached. Water, carbon dioxide and table salt are some examples of compounds.
A compound is form when two or more atoms form a chemical bond that links them together. As we know, there are two types of bonds are present that are ionic bonds and covalent bonds.
In an ionic bond, the atoms are linked together by the electrostatic forces of the attraction between ions of opposite charge. So,compounds are composed of molecules bonded together.
Thus, option C is correct.
To learn more about the compound, follow the link;
https://brainly.com/question/14117795
#SPJ2
how many liters of water are needed to prepare 756 g of CaCO3 for a 3.50 M solution? MM=100.1 grams/mole
The volume of water needed to prepare the solution given the data is 2.16 L
What is molarity?This is defined as the mole of solute per unit litre of solution. Mathematically, it can be expressed as:
Molarity = mole / Volume
How to determine the mole of CaCO₃Mass of CaCO₃ = 756 g Molar mass of CaCO₃ = 100.1 g/mol Mole of CaCO₃ =?Mole = mass / molar mass
Mole of CaCO₃ = 756 / 100.1
Mole of CaCO₃ = 7.55 moles
How to determine the volume Mole of CaCO₃ = 7.55 molesMolarity = 3.5 MVolume = ?Volume = mole / molarity
Volume = 7.55 / 3.5
Volume = 2.16 L
Learn more about molarity:
https://brainly.com/question/15370276
#SPJ1
1) Students are interested in quickly completing their lab experiment before going to lunch. What are 4
ways to increase the reaction rate below?
Zn() + 2HCl(aq)
Hz(s) + ZnCl2(g) + heat
The reaction rate can be increased by increasing the temperature, increasing the concentration of reactants, using catalysts, or increasing the surface area of the reactants.
Factors affecting rates of reactionsThe factors affecting the rate of reactions include:
Temperatureconcentration of reactantsAddition of catalystsSurface area of reactantsEach factor affects the rate of reaction as follows:
Increased temperature increases the rate of reactionIncreasing the concentration of reactants increases the rate of reactionAdding catalysts increases the rate of reactionsIncreasing the surface area of reactants increases the rate of reactions.More on factors affecting rates of reactions can be found here: https://brainly.com/question/14817541
#SPJ1
What would the charge on KAt be?
The overall charge of the given compound of potassium and Arsenic is zero (0).
What is the charge of an atom?
An atom consists of a positively charged nucleus, surrounded by one or more negatively charged particles called electrons. When the number of protons exceed the number of electrons, the atom will positively charged and it will be negatively charged if the number of electrons exceed the number of protons.
For the given compound;
KAs; As (Arsenic = -3) + K (potassium = +3)KAs overall charge = -3 + 3 = 0Thus, the overall charge of the given compound of potassium and Arsenic is zero (0).
Learn more about charge here: https://brainly.com/question/25922783
#SPJ1
a. List six renewable resources that humans depend on. (0.5 point)
Answer:
-trees
-solar energy
-hydroelectricity
-wind energy
sorry I can only think or 4 atm
Calculate the mass in grams of NaCl required to prepare 0.500 L of a 0.500 M solution.
Answer:
14.61 g NaCl
Explanation:
Molarity = moles / volume of solution (litres)
0.500 = moles / 0.500 L
moles = 0.25
Molar mass of NaCl is 58.44 g NaCl /1 mol NaCl.
0.25 moles NaCl x 58.44 g NaCl /1 mol NaCl
= 14.61 g NaCl
Besides drinking water, how is water helpful for life and nature?
Answer:
It keeps us alive, helps us grow plants, helps plants thrive, gives us food, helps keep our animals and crops healthy, cleans us, and so much more
Explanation:
MgCl2(aq) + NaOH(aq) →
Explanation:
MgCl2(aq) + NaOH(aq) = Mg(OH)2(s) + NaCl. Both magnesium nitrate and sodium hydroxide solutions are colourless solutions. When they react with each other, a white precipitate (Mg(OH)2) and a colourless solution is given. Sodium chloride exists in the colourless aqueous solution.
The decisions people (society) make to reduce their consumption of resources will most likely have a positive impact on the environment.
Question 30 options:
True
False
Answer:
True
Explanation:
I think it is common sense to assume that if we all came together to reduce our consumption then less resources would be harvested from envrionment and thus we would have positive impact on environment.
# 12 of Equilibrium Constant
Consider the chemical system:
2 NO(g)
N₂(g) + O₂ (g)
K = 2.1 x 1030
How do the equilibrium concentrations of the reactant compare to the equilibrium concentration of the products?
Select one:
O a. They are much lower
O b. They are much higher
O c.
They are about the same order of magnitude
O d. They have to be exactly equal
e.
You can't tell from the information given
Answer:
of Equilibrium Constant
Consider the chemical system:
2 NO(g)
N₂(g) + O₂ (g)
K = 2.1 x 1030
How do the equilibrium concentrations of the reactant compare to the equilibrium concentration of the products?
Select one:
O a. They are much lower
O b. They are much higher
O c.
They are about the same order of magnitude
O d. They have to be exactly equal
e.
You can't tell from the information
Explanation:
of Equilibrium Constant
Consider the chemical system:
2 NO(g)
N₂(g) + O₂ (g)
K = 2.1 x 1030
How do the equilibrium concentrations of the reactant compare to the equilibrium concentration of the products?
Select one:
O a. They are much lower
O b. They are much higher
O c.
They are about the same order of magnitude
O d. They have to be exactly equal
e.
You can't tell from the information
cadmium metal reacts with a nickel (III) chlorate solution
I need help with this i need help by sb
Answer:
30N to the left.
Explanation:
There is no net vertical force as the 45N force upwards and the 45N force downwards cancel each other out.
Horizontally, the resultant force is the 30N to the left as the 45N force to the left is in opposite direction to the 15N force to the right, so they are subtracted:
45N - 15N = 30N
Hope this helps!
please assist with answering the attached assignment
For first order plot of ln( [tex]P_{SO_{2}Cl_{2}}[/tex]) vs time will be a straight line, which shows first order reaction
What is First Order Reaction ?
A first-order reaction can be defined as a chemical reaction in which the reaction rate is linearly dependent on the concentration of only one reactant. In other words, a first-order reaction is a chemical reaction in which the rate varies based on the changes in the concentration of only one of the reactants
Every mole of SO₂Cl₂ that dissociates results in a mole of SO₂ &Cl₂
[tex]\rm P_{total}= P_{Cl_{2}\\}+ P_{SO_{2}Cl_{2}}+ P_{SO_{2}}\\\\ P_{total} = P_{o}- \beta +\beta + \beta\\\\ P_{total} = P_{o}+\beta[/tex]
For first order plot of ln( [tex]P_{SO_{2}Cl_{2}}[/tex]) vs time will be a straight line.
t(hr) [tex]P_{SO_{2}Cl_{2}}[/tex] ln([tex]P_{SO_{2}Cl_{2}}[/tex] )
0 11.07 2.404
3 7.35 1.995
6 4.88 1.585
9 3.24 1.176
12 2.15 0.765
15 1.43 0.358
β = P(total) - P(initial)
[tex]\rm P_{SO_{2}Cl_{2}}[/tex] = P₀ - β
for t= 3
β =3.72
and
[tex]\rm P_{SO_{2}Cl_{2}}[/tex] = 7.35
For first order plot of ln( [tex]P_{SO_{2}Cl_{2}}[/tex]) vs time will be a straight line, which shows first order reaction.
To know more about First order Reaction
https://brainly.com/question/2284525
#SPJ1
how many molecules are in 85.4 grams of Li2SO4
Answer:
85.4
Explanation:
What is the best tool for separating marbles from water?
a.screen
b.filter paper
c.evaporation dish
Answer:
the best tool for separating marbles from water is evaporation disc
Describe the problem you have chosen to investigate. Plan your investigation and write out the steps in your procedure. Include a sketch of your set up. Explain how this procedure and set-up will help you investigate the problem.
Answer both questions asap for brainliest
Carry out your experiment. Present evidence that you have carried out the experiment below. You may upload photos as evidence. Record your data in a chart. Be sure you have starting data and several data points. Analyze your results. You may want to present your data as a graph. Did the investigation you planned determine the relationships among temperature, the energy transferred, the type of matter, the mass, and the change in the average kinetic energy of the particles as measured by the temperature of the sample? How do you know? Use complete sentences and paragraph form for your analysis.
Answer: baited.
Explanation:
How many molecules of hydrogen fluoride (HF) are in (8.5x10^-2) moles of hydrogen fluoride (HF)?
Avogadro's numbers are used to convert the moles, atoms, and molecules. There are 51.17 × 10²¹ molecules in 8.5 x 10⁻² moles of HF.
What is Avogadro's number?Avogadro's number converts the moles into molecules with the help of the value of the Avogadro's number as 6.02 x 10²³.
We know that 1 mole of HF has 6.02 x 10²³ molecules
Then, 8.5 x 10⁻² moles of HF will have:
(8.5 x 10⁻²) × 6.02 x 10²³ = 51.17 × 10²¹ molecules.
Therefore, 51.17 × 10²¹ molecules are present in 8.5 x 10⁻² moles of HF.
Learn more about molecule conversion here:
https://brainly.com/question/3427272
#SPJ1
