Answers
Answer:
5% of $5.00
[tex] \frac{5}{100} \times 5.00[/tex]
[tex] = \frac{1}{4} [/tex]
Related Questions
Helppppppp plzzzzzzz
Answers
Answer:
102°
Step-by-step explanation:
Angles in a straight line is added up to 180°
So,
Angle 1 + Angle 2 = 180°
Given that,
Angle 2 = 78°
We can find angle 1
Let us find,
Let the angle 1 be x
[tex]x+78=180\\x=180-78\\x=102[/tex]
As a and b lines are parallel,
Angle 1 = Angle 5 (Corresponding angles)
Also we already found the angle 1
So,
Angle 5 = 102°
Hope this helps you.
Let me know if you have any other questions :-)
what is the greatest common factor of 42, 12, and 6?
Answers
Answer:
The greatest common factor is surprisingly 6.
All three numbers can be divided by 6 and it is the highest value that can be taken from all three numbers.
Step-by-step explanation:
Hope this helps.
<3
Answer:
the GCF of those numbers is 6.
Step-by-step explanation:
One way to solve this is to list the factors of them, then find the greatest one that they share.
42: 1, 2, 3, 6, 7, 14, 21, 42
12: 1, 2, 3, 4, 6, 12
6: 1, 2, 3, 6
If we look at them, notice that six is in all of them. All of them have factors of six. Can we go any higher than that? No because six is the greatest factor of six, so we can't go any higher and still have all of them share a GCF. So your answer is 6.
1. A new drill is used to dig a hole in the ground. At noon, the hole is 13.2 feet deep when the new drill is turned on for the first time that day. At 2 p.m., the drill has dug the hole to be feet deep. The new drill dug 1.5 times as much of the hole as the old drill would have in the same length of time.
(a) What expression represents the number of feet the new drill dug?
(b) How many feet would the old drill have dug in the same length of time? Show your work. Answer the question in a complete sentence.
Answers
Using the subtraction and division operation, the depth dug by the new drill, and the depth that would have been dug by the old drill are 29.05 feets and 19.37 feets respectively.
The expression for the number of feets dug by the new drill can be calculated thus :
Final depth - Initial depthDepth dug = 42.25 feets - 13.2 feets
Depth dug = 29.05 feets
The new drill dug 1.5 times the depth that woukd have been dug by the old drill :
Depth dug by old drill = 29.05 / 1.5
Depth dug by old drill = 19.37 feets
Therefore, the depth dug by old drill will be 19.37 feets
Learn more : https://brainly.com/question/12474772
Sue's paycheck is $1,040 for 40 hours of work. If she works 30 hours next week, what will her paycheck be?
Answers
Answer: 780
Step-by-step explanation:
1040/40 = 26
If Sue's paycheck contains $1,040 for 40 hours then she gets pay $26 for a hour.
26(30) = 780
To find what her paycheck consist of within 30 hours, you'll multiply 26, the amount she make an hour by 30, hours and you'll get 780.
give the quadratic sequence 2,3,10,23,........
write down the next term of the sequence.
Answers
Answer:
The next term of the sequence is 42
Moon Company produces baseball bats and cricket paddles. It has two departments that process all products – Cutting Department and Finishing Department.
In Finishing Department, direct materials (DM) are added at the start of the process and conversion costs (CC) are added evenly during the process. Company is using Weighted Average method for the Finishing Department.
During July, beginning work in process in the Finishing Department was 80% complete as to conversion. Beginning inventories included $30,800 for transferred-in costs, $13,200 for direct materials, and $27,500 for conversion costs. Ending inventory was 30% complete as to CC. Additional information about the Finishing Department follows:
Finishing
Beginning work-in-process units
26,400
Units transferred in this period
74,800
Units completed & transferred out
79,200
Ending work-in-process units
22,000
Material costs added
$37,400
Conversion costs
$75,460
Transferred-in costs
$141,240
What is equivalent units for transferred-in cost, direct materials, and conversion cost, respectively? Separate with slash /.
Moon Company produces baseball bats and cricket paddles. It has two departments that process all products – Cutting Department and Finishing Department.
In Finishing Department, direct materials (DM) are added at the start of the process and conversion costs (CC) are added evenly during the process. Company is using Weighted Average method for the Finishing Department.
During July, beginning work in process in the Finishing Department was 80% complete as to conversion. Beginning inventories included $30,800 for transferred-in costs, $13,200 for direct materials, and $27,500 for conversion costs. Ending inventory was 30% complete as to CC. Additional information about the Finishing Department follows:
Finishing
Beginning work-in-process units
26,400
Units transferred in this period
74,800
Units completed & transferred out
79,200
Ending work-in-process units
22,000
Material costs added
$37,400
Conversion costs
$75,460
Transferred-in costs
$141,240
What is equivalent units for transferred-in cost, direct materials, and conversion cost, respectively? Separate with slash /.
Moon Company produces baseball bats and cricket paddles. It has two departments that process all products – Cutting Department and Finishing Department.
In Finishing Department, direct materials (DM) are added at the start of the process and conversion costs (CC) are added evenly during the process. Company is using Weighted Average method for the Finishing Department.
During July, beginning work in process in the Finishing Department was 80% complete as to conversion. Beginning inventories included $30,800 for transferred-in costs, $13,200 for direct materials, and $27,500 for conversion costs. Ending inventory was 30% complete as to CC. Additional information about the Finishing Department follows:
Finishing
Beginning work-in-process units
26,400
Units transferred in this period
74,800
Units completed & transferred out
79,200
Ending work-in-process units
22,000
Material costs added
$37,400
Conversion costs
$75,460
Transferred-in costs
$141,240
What is equivalent units for transferred-in cost, direct materials, and conversion cost, respectively? Separate with slash /.
Moon Company produces baseball bats and cricket paddles. It has two departments that process all products – Cutting Department and Finishing Department.
In Finishing Department, direct materials (DM) are added at the start of the process and conversion costs (CC) are added evenly during the process. Company is using Weighted Average method for the Finishing Department.
During July, beginning work in process in the Finishing Department was 80% complete as to conversion. Beginning inventories included $30,800 for transferred-in costs, $13,200 for direct materials, and $27,500 for conversion costs. Ending inventory was 30% complete as to CC. Additional information about the Finishing Department follows:
Finishing
Beginning work-in-process units
26,400
Units transferred in this period
74,800
Units completed & transferred out
79,200
Ending work-in-process units
22,000
Material costs added
$37,400
Conversion costs
$75,460
Transferred-in costs
$141,240
What is equivalent units for transferred-in cost, direct materials, and conversion cost, respectively? Separate with slash /.
Answers
The Moon Company's equivalents units for transferred-in cost, direct materials, and conversion cost are 74,800 / 101,200 / 86,800 respectively.
Data and Calculations:
Percentage of completion:
Beginning work in process = 80%
Ending work in process = 30%
Beginning inventories:
Transferred-in costs = $30,800
Direct materials costs = $13,200
Conversion costs = $27,500
Physical Flows of Units:
Beginning WIP = 26,400
Units transferred in from Cutting Department = 74,800
Total production units available = 101,200 (26,400 + 74,800)
Units completed and transferred out = 79,200
Ending WIP = 22,000
Transferred-in Direct Materials Conversion
Units transferred out 79,200 79,200
(79,200 x 100%)
Units transferred-in 74,800 0 0
(74,800 x 100%)
Ending WIP 0 22,000 (100%) 6,600 (22,000 x 30%)
Total equivalent units 74,800 101,200 86,800
Thus, the equivalent units for the Finishing Department are determined based on the percentage of completion under the Weighted Average Method.
Learn more: https://brainly.com/question/17078653
please help me with this question
Answers
Answer:
1.4
Step-by-step explanation:
hope it helped
solve pls brainliest
Answers
Answer: (a.) -19 (b.) 78
Step-by-step explanation:
(a.) -33+14= -19 (b.) 75 - x = 78
(b.) 75 to zero = 75 Zero to -3
is 3 points behind zero, this make more distance from 75 so…
(b.) 75+3 = 78
13+ 6.4+ 2.78 awnser ?
Answers
Answer:
22.28
Step-by-step explanation:
first add the decimals then the other number.
PLEASE HELP ITS MATH THANK YOUUUU
Answers
Answer:
8 millimeters 4x where x is 2 millimeters
. . .Factor 2x2 + x - 1
Answers
Answer:
(2−1)(+1)
Step-by-step explanation:
22+−12x^{2}+{\color{#c92786}{x}}-12x2+x−122+2−−1
What is the measure of <1
Answers
Answer:
43
Step-by-step explanation:
274 would be absurd and 83 would be close to a right angle which that angle is no where near. It looks like half a right angle meaning 45 and 43 is the closest to that so I think its 43
20.99 for a 42 lb-bag of dog food (im pretty sure your supposed to divide the last number to the first number example: 18.5÷11.99)
Answers
Answer:
18.5÷11.99 is correct the answer is most likly option B
Write the converse inverse and contrapositive of the statement below
Answers
The statement to be converted is "If Snoopy did not dance a jig, then Charles Schultz wrote a Sonata.
The converse is: If Charles Schultz did not write a Sonata, then Snoopy did dance a jig.
What is the Converse of a Statement?A converse statement is arrived at when you have swapped the hypothesis and the conclusion.
Another example that helps buttress this is given below:
Original Statement: If the car braked, then the driver was sleeping.
Converse Statement: The driver was not sleeping therefore the car did not brake.
See the link below for more about Converse Statements:
https://brainly.com/question/2751386
CE TASK
V.
3
The carpenter spent 7/8 of his money on bags of sand for the sandbox. He spent 1/2 of the rest
of his money on some packs of bunting flags to decorate thesandbox and had $19.90 left How much money did the carpenter start with? Draw a bar model to show your work
Answers
Determine how much money did the carpenter start with
The total money with the carpenter is $318.4
Given:
let
x = total money with the carpenter
Bags of sand = 7/8 of x
= 7/8x
Money remaining = x - 7/8x
= (8x-7x) / 8
= 1/8x
Bags of bunting bags = 1/2 of 1/8x
= 1/2 × 1/8x
= 1/16x
Money left = $19.90
Total money = bags of sand + bag of bunting flag + money left
x = 7/8x + 1/16x + 19.90
x = (14x + x) / 16 + 19.90
x = 15/16x + 19.90
x - 15/16x = 19.90
16x - 15x / 16 = 19.90
x/16 = 19.90
divide both sides by 1/16
x = 19.90 ÷ 1/16
= 19.90 × 16/1
= 318.4
Therefore, the total money with the carpenter is $318.4
Read more:
https://brainly.com/question/7852538
7+ За = 12 + 2а
Can anyone give the answer quick!
Answers
Answer:
A=5
Step-by-step explanation:
Answer:
A=5
Step-by-step explanation:
7+3a=12+2a
-2a -2a
7+a=12
-7 -7
a=5
NO LINKS!!! Part 1: y = x^3
Shape:
Domain:
Range:
Locater point:
Answers
Answer:
Shape: Not sure what to put
Domain: ( -oo, oo )
Range: ( -oo, oo )
Locater point: ( 0, 0 )
Step-by-step explanation:
Shape - You have the shape on the graph
Domain and Range - Both go on forever since there is no hole/interruption
Locater Point: I would say origin because it is the closest thing to a vertex, which is an example of a locater point.
Hopefully this helps!
Brainliest please?
A painter has 7/8 gallon of stain. An interior door requires 1/4 gallon of stain to finish. How many doors can be finished?
Answers
Answer:
Three and a half doors can be painted with 7/8 gallons
Step-by-step explanation:
It takes 2/8 to be 1/4 so divide each side of the 7/8 by 2 and you get 3.5/4
Answer:
3 and 1/2 doors can be painted with 7/8 gallons of stain
What is the Domain and range of y = 2 x - 11 + 2
Answers
Step-by-step explanation:
the domain is the set or range of valid values for x.
the range is the set or range of valid values for y (= f(x)).
if you did not miss anything in your problem statement, then I see a function
y = 2x - 11 + 2
no restrictions are defined.
so, domain and range are both the interval
(-infinity, +infinity).
notice the round brackets, as "infinity" is never a value and cannot be included in an interval.
now, if you missed a division sign and the function looks like
y = 2/x - 11 + 2
then we know, x must never be 0, as a division by 0 is undefined.
so, the domain in that case would be
-infinity < x < 0, 0 < x < +infinity
or short
x <> 0
the range would still be every possible value in
(-infinity, +infinity).
1. Scale 1 cm = 250 km
25
Using the scale above, calculate to find how
many km are in the following map distances:
a.) 2 cm =
km
b.) 5 cm
km
c.) 3 cm=
km
Answers
Answer:
a= 500km b= 1,250 c= 750
Step-by-step explanation:
a= 250x2=500km
b= 250x5=1,250km
c= 250x3=750km
elect the correct answer from each drop-down menu.
Triangle XYZ, with vertices X(-2, 0), Y(-2, -1), and Z(-5, -2), undergoes a transformation to form triangle X′Y′Z′, with vertices X′(4, -2), Y′(4, -3), and Z′(1, -4). The type of transformation that triangle XYZ undergoes is a
.
Triangle X′Y′Z′ then undergoes a transformation to form triangle X′′Y′′Z′′, with vertices X″(4, 2), Y″(4, 3), and Z″(1, 4). The type of transformation that triangle X′Y′Z′ undergoes is a
.
Answers
Answer:
1. Triangle XYZ undergoes a translation.
2. Triangle X'Y'Z' undergoes a reflection across the x-axis
A principal of $2200 is invested at 6.25% interest, compounded annually. How much will the investment be worth after 13 years
Answers
Answer:
Let S = Sum after 13 years
So = amount invested
t = time in years
i = annual interest rate = .0325
The S = So(1+i)t = $2,200(1.0325)13 = $3,334.21
After 13 years, the investment will be worth approximately $4365.67. To calculate the future value of the investment after 13 years with annual compounding interest, we can use the formula for compound interest.
Future Value (FV) = Principal (P) * (1 + (Interest Rate (r) / 100))^Time (n)
Where:
P = Principal (initial investment)
r = Annual interest rate (as a decimal)
n = Number of years
Given:
Principal (P) = $2200
Annual interest rate (r) = 6.25% = 6.25/100 = 0.0625 (as a decimal)
Number of years (n) = 13
Now, let's calculate the future value:
FV = $2200 * (1 + 0.0625)^13
FV = $2200 * (1.0625)^13
FV ≈ $2200 * 1.984396861 (rounded to 9 decimal places)
FV ≈ $4365.672097 (rounded to 2 decimal places)
After 13 years, the investment will be worth approximately $4365.67.
To know more about investment:
https://brainly.com/question/29074561
#SPJ2
Please include step by step instruction, so I can learn how to solve the problem. Thank you
Answers
9514 1404 393
Answer:
A, C
Step-by-step explanation:
First of all, recognize that any basic arithmetic operation between a rational number and an irrational number will have an irrational result. That means, you can eliminate any answer choices that involve an irrational number.
Fractions and mixed numbers involving integers are always rational, so you only need to look at the radicals. You know 9 is 3×3, so is a perfect square, and √9 = 3 is rational. You know 5 is not a perfect square, so √5 is irrational.
Considering the above, any expression involving √5 will have an irrational result. That means you can eliminate choices B and D.
choices A and C will result in a rational number
_____
Additional comment
A = 6.8 +0.75 = 7.55 (rational)
C = 6.8 × 0.75 = 5.100 (rational)
A 98% confidence interval for a proportion is found to be (0.62, 0.68).
What is
the sample proportion?
O A. 0.66
OB. 0.64
O C. 0.65
O D. 0.68
Answers
Answer:
I think the answer is C ,The sample proportion is the fraction of samples which were successes, so. (1) For large , has an approximately normal distribution.
Step-by-step explanation:
If the queston true please votes 5 stars and mark as brainliest for me.Thank you so much
Given that a 98% confidence interval for a proportion is found to be (0.62, 0.68). The sample proportion will be 0.65.
What is confidence interval for population proportion?Formula to calculate the confidence interval for population proportion p :-
[tex]p' - Z_{\alpha }\sqrt{\frac{p'q'}{n} } < p < p' + Z_{\alpha }\sqrt{\frac{p'q'}{n} }[/tex]
Where,
p is the population proportion.
p' is the sample proportion.
n is the size of the sample.
[tex]Z_{\alpha }[/tex] is the desired degree of confidence.
Given that a 98% confidence interval for a proportion p is found to be (0.62, 0.68).
[tex]p' - Z_{\alpha }\sqrt{\frac{p'q'}{n} } = 0.62\\\\p' + Z_{\alpha }\sqrt{\frac{p'q'}{n} } = 0.68[/tex]
Adding the two equations,
2p' = 1.3
p' = 0.65
Learn more about confidence interval for population proportion here
https://brainly.com/question/13686615
#SPJ2
Simplify the following:
[tex]\sqrt{50} x^{2} y^{3}[/tex]
Answers
Answer:
5xy[tex]\sqrt{2y}[/tex]
Step-by-step explanation:
Answer: simplify
5√2x² y²
Help please thank you
Answers
Factor.
2xy+5x−12y−30
Enter your answer in the box.
Answers
(2y+5)(x−6)
not rlly sure tho
what is the total with tax? price? $62.79 tax 9.5 percent
Answers
Answer:
$68.76
Step-by-step explanation:
price: $62.79
tax percent: 9.5%
total with tax : $62.79 + 9.5% of $62.79
= $68.755
Hansen and his good buddy Xavier are both mechanics at a shop that does oil changes. They are in a friendly competition to see who can complete the most oil changes in one day. Hansen has already finished 7 oil changes today, and can complete more at a rate of 2 oil changes per hour. Xavier just came on shift, and can finish 3 oil changes every hour. Sometime during the day, the friends will be tied, with the same number of oil changes completed. How many oil changes will Hansen and Xavier each have done? How long will that take?
Answers
2: ( already starts at 7)
9, 11, 13, 15, 17, 19, 21
3: 7th hour
3, 6, 9, 12, 15, 18, 21
7th hour
At the 7th hour, they both have done 21 oil changes.
Pls help
||x-5|+2|<=3
Answers
Answer:
1,1 + 1oope k1 5l+<=3 is the 109199
