Calculate the Enthalpy for the following reaction using the listed thermochemical equations:
Please help

Answer:

the answer is chlorophyll....

Explanation:

if u need it's purpose just let me know

Explanation:

the green colouring matter found in plants is called chlorophyll.

Answer:

s=d/t. d=540 t=9h

540÷90=6 km/h

Answer: The products will be copper and oxygen.

Explanation: Copper electorde is an active electrode so it constantly takes part in the electrolysis. Cathode is a pure copper negative electrode and anode is a impure copper positive electrode. So the copper present in the solution, along with the copper present in the anode will come off and go to the cathode. As a result, cathode gains copper. And the remaining impurities settle down in the bottom.

In the anode, oxygen will be given off because according to the order of discharge, if SO4 is present then the ions will stay in the solution and oxygen will be released. So at the end, solution of SO4 and H2O will be remaining while copper and oxygen is extracted.

The half equations are-

Cathode: Cu2+ + 2e- = Cu

Anode: Cu + 2e- = Cu2+

Something you might not know: The solution in electrolysis turns blue when copper goes to the cathode. So copper electrodes are also used in electroplating.

Homogeneous mixture - same throughout

Heterogeneous mixture - different throughout

Answer:  Homogeneous Mixture : B(different throughout)

Heterogeneous Mixture : A(same throughout)

3.125g

Explanation

2.4 minutes = 1 half life

so 12 minutes = 5 half lives (12/2.4)

100g/2 = 50g (1 half life)

50g/2 = 25g (2 half lives)

25g/2 = 12.5g (3 half lives)

12.5g/2 = 6.25g (4 half lives)

6.25g/2 = 3.125g (5 half lives)

Answer:

4.50000 moles

Explanation:

This is dimensional analysis. If there is 163.59 grams in 1 mole of this compound then the converse is true: in 1 mole of this compound there is 163.59 grams --> 1 mol/163.59 grams.

Now that you have your conversion factor:

736.155 grams * (1 mol/163.59 grams) is your equation.

When you multiply these together, grams cancel and you end up with the desired mole-based answer:

4.50000 moles (The extra zeros are to make up for the 6 significant figures in 736.155, feel free to omit them if necessary.)

(pls give brainliest if this helped)

Answer:

I don't know do you know tell me please

Answer:

unbalanced

Explanation:

because it is REACTing.

Answer:

Explanation:

pH > 7   as 10 is more than 7

The cleaner is very corrosive.

It is a moderately basic. If it was 12 that would make it much more basic (100 times more basic).

Answer:

meerkats

Explanation:

Answer:

Inside the Atom

Just like bricks are the building blocks of a home, atoms are the building blocks of matter. Matter is anything that has mass and takes up space (volume). All matter is made up of atoms. The atom has a nucleus, which contains particles of positive charge (protons) and particles of neutral charge (neutrons). Surrounding the nucleus of an atom are shells of electrons - small negatively charged particles. These shells are actually different energy levels and within the energy levels, the electrons orbit the nucleus of the atom.

Answer:

Please give Brainliest!

Explanation:

Material properties are dependent on the temperature. The tensile strength, yield strength and modules of elasticity decrease with increasing temperature. It should be expected that fatigue properties are also affected by the temperature.

Answer:

Its B all the others arent true and also dont make any sense

Explanation:

Sodium has a lower ionization energy than magnesium describes why sodium reacts vigorously than magnesium chloride.

Therefore, sodium is more reactive than magnesium chloride because of lower ionization energy.

For more details on sodium reactivity, check the link below.

https://brainly.com/question/6837593

Answer:

Volume occupied is approx.  

38 ⋅ ML

Explanation:

Density  ρ = Mass  Volume  And thus  Volume  = Mass  ρ = 1.592 ⋅ l b × 454 ⋅ g ⋅ l b − 1 19.3 ⋅ g ⋅ m L − 1   =   ? ? ⋅ m L

Answer:

We know the initial volume of the potassium nitrate solution is 1.0 mL and the initial concentration is 2.0 M, we also know that an unknown volume of water was added to the solution, which diluted our concentration down to a final value of 0.008 M. We are trying to find the final volume.

Here we can use this formula since the initial and final solutions are proportional. Before that let's define our variables.

[tex]M_1 = 2.0 M\\V_1 = \frac{1.0 mL}{1000} = 0.001 L\\M_2 = 0.008 M\\V_2 = \ ?[/tex]

[tex]M_{1}V_{1} =M_2 V_2\\[/tex]

[tex](2.0)(0.001) = (0.008)V_2\\\\\frac{(2.0)(0.001)}{0.008} = V_2\\\\V_2 = 0.25 L \ or \ (0.25 \ * \ 1000) = 250 \ mL[/tex]

Therefore you would have 0.25 L or 250 mL of your final solution.

Answer:

look at the explanation

Explanation:

Tides would be much higher also A lunar month would be about 10 days rather than 29 days, so the phases of the moon would go much quicker.

Explanation:

the process by which green plants and some other organisms use sunlight to synthesize foods from carbon dioxide and water. Photosynthesis in plants generally involves the green pigment chlorophyll and generates oxygen as a byproduct.

Answer:

photosynthesis is the process of making food by green plants by using sunlight,carbon dioxide, water.

Answer:

C.  Bending sheet metal.

Explanation:

The metal is still intact.  No change in chemical bonds have occurred.

Burning a candle is converting wax into heat, CO2 and carbon soot.

A rusting bicycle is converting goof iron, Fe, into iron oxide (rust, Fe2O3)

Toasting bread is more difficult to define.  If the bread is just warmed, then it is physical.  If it is toasted (browned/burned), then a few surface molecules have been converted into tasty carcinogens, my favorite poison.

Answer:

Triple bond is the strongest bond

Triple bonds are stronger than the equivalent single bonds or double bonds, with a bond order of three.

Answer:

In a single covalent bond, when the electrons are shared between two s orbitals, the resulting bond is a sigma (σ) bond . Sigma bonds are the strongest covalent chemical bonds....!!

With hot water comes hot steam, it fills the shower area with steam which raises the air temperature and the air then rises out of the shower

Answer:

A) HF (Hydrofluoric acid)

Explanation:

dw I gotchu. So first off there are three types of intermolecular forces of attraction: 1) London-Dispersion, 2) Dipole-Dipole, 3) Hydrogen-Bonding Attraction Forces. That is also ranked in increasing strength, with Hydrogen-Bonding Attraction Forces being the strongest. Every molecule has London-Dispersion forces present and all the diatomic molecules listed have dipole moments of a certain debye (or Coloumb-meter) value. Both are irrelevant here so dw about that. Lets look at the strongest attraction: the hydrogen-bonding one. Now, don't get confused bc all of these acids are bonded to H bc hydrogen-bonding attraction forces only occur when H is bonded to N, O, or F. So Process of Elimination, hydrofluoric acid (HF) has the strongest intermolecular forces of attraction.

Note: If you don't know what inter/intra molecular forces of attraction are, ill give u a quick summary. Intermolecular refers to electrostatic attractions between molecules while intramolecular refers to the actual bonds, single, double, or triple, binding the atoms together. Well there you have it, have a great day. :)

Answer:

Im pretty sure the answer is A. An electron moves from the FIFTH energy level down to the SECOND energy level.

Explanation:

Answer:

prokaryote, also spelled procaryote, any organism that lacks a distinct nucleus and other organelles due to the absence of internal membranes. ... Bacteria are among the best-known prokaryotic organisms. The lack of internal membranes in prokaryotes distinguishes them from eukaryotes.

Explanation:

Answer:

D. see which items stick to the magnet

Explanation:

To predict which items are magnetic, the students will have to test whether or not each item is attracted to the magnet. Only objects that are magnetic stick to a magnet, so all of the items that stick to the magnet should be magnetic.

Hopefully that's helpful! :)

Answer:

C A

Explanation:

The the number line that shows that two opposite numbers have a sum of 0 is 4 3 2 -1 0 1 2 3 4 5 6 7 8 9 10 11 12. The correct option is B.

A number line is a picture of a graduated straight line that serves as a visual representation of real numbers in elementary mathematics.

Every point on a number line is assumed to be a real number, and every real number is assumed to be a point.

4 3 2 -1 0 1 2 3 4 5 6 7 8 9 10 11 12

We can see from this number line that the inverse of each number is located at an equal distance from 0.

For example, the inverse of 3 is -3, which is the same distance from 0 as 3. Similarly, the inverse of -1 is 1, which is the same distance from 0 as -1.

Thus, the correct option is B.

For more details regarding number line, visit:

https://brainly.com/question/16191404

#SPJ5