BRAINLIEST TO CORRECT what would the cook time for 2 half-lives of the popcorn?

Answer:

Explanation:

1. A solution is made by dissolving 5.84g of NaCl is enough distilled water to a give a final volume of 1.00L. What is the molarity of the solution? a. 0.100 M b. 1.00 M c. 0.0250 M d. 0.400 M 2. A 0.9% NaCl (w/w) solution in water is a. is made by mixing 0.9 moles of NaCl in a 100 moles of water b. made and has the same final volume as 0.9% solution in ethyl alcohol c. a solution that boils at or above 100°C d. All the above (don't choose this one) 3. In an exergonic process, the system a. gains energy b. loses energy c. either gains or loses energy d. no energy change at all

Answer:

[tex]\boxed {\boxed {\sf 0.100 \ M }}[/tex]

Explanation:

Molarity is a measure of concentration in moles per liter.

[tex]molarity = \frac{moles \ of \ solute}{liters \ of \ solution}}[/tex]

The solution has 5.84 grams of sodium chloride or NaCl and a volume of 1.00 liters.

We are given the mass of solute in grams, so we must convert to moles. This requires the molar mass, or the mass of 1 mole of a substance. These values are found on the Periodic Table as the atomic masses, but the units are grams per mole, not atomic mass units.

We have the compound sodium chloride, so look up the molar masses of the individual elements: sodium and chlorine.

The chemical formula (NaCl) contains no subscripts, so there is 1 mole of each element in 1 mole of the compound. Add the 2 molar masses to find the compound's molar mass.

There are 58.4397693 grams of sodium chloride in 1 mole. We will use dimensional analysis and create a ratio using this information.

[tex]\frac {58.4397693 \ g\ \ NaCl} {1 \ mol \ NaCl}[/tex]

We are converting 5.84 grams to moles, so we multiply by that value.

[tex]5.84 \ g \ NaCl *\frac {58.4397693 \ g\ NaCl} {1 \ mol \ NaCl}[/tex]

Flip the ratio. It remains equivalent and the units of grams of sodium chloride cancel.

[tex]5.84 \ g \ NaCl *\frac {1 \ mol \ NaCl}{58.4397693 \ g\ NaCl}[/tex]

[tex]5.84 *\frac {1 \ mol \ NaCl}{58.4397693 }[/tex]

[tex]0.09993194823 \ mol \ NaCl[/tex]

We can use the number of moles we just calculated to find the molarity. Remember there is 1 liter of solution.

[tex]molarity= \frac{moles \ of \ solute}{liters \ of \ solution}[/tex]

[tex]molarity= \frac{ 0.09993194823 \ mol \ NaCl}{1 \ L}[/tex]

[tex]molarity= 0.09993194823 \ mol \ NaCl/L[/tex]

The original measurements of mass and volume have 3 significant figures, so our answer must have the same. For the number we calculated, that is the thousandths place. The 9 in the ten-thousandths place tells us to round the 9 to a 0, but then we must also the next 9 to a 0, and the 0 to a 1.

[tex]molarity \approx 0.100 \ mol \ NaCl/L[/tex]

1 mole per liter is 1 molar or M. We can convert the units.

[tex]molarity \approx 0.100 \ M \ NaCl[/tex]

The molarity of the solution is 0.100 M.

Answer:

Explanation:

A balanced chemical equation refers to the reaction taking place whereby the number of atoms associated in the reactants side is equivalent to the number of atoms on the products side.

From the given information, the balanced equations are as follows:

[tex]\mathbf{(a) \ \ \ Ti(s) + O_{2(g)} \to TiO_{2(s)}}[/tex]

[tex]\mathbf{(b) \ \ \ 2Ag_{2}O \to 4Ag_{(s)} + O_{2(g)}}[/tex]

[tex]\mathbf{(c) \ \ \ 2C_3H_7OH + 9O_2 \to 6CO_2+8H_2O}[/tex]

[tex]\mathbf{(d) \ \ \ 2C_5 H_{12}O \to 10 CO_2 + 12 H_2O}[/tex]

Answer:

Six

Explanation:

Answer:

Hypercalcemia can cause stomach upset, nausea, vomiting and constipation. Bones and muscles. In most cases, the excess calcium in your blood was leached from your bones, which weakens them. This can cause bone pain and muscle weakness.

Some symptoms are:

Fatigue, bone pain, headaches.

Nausea, vomiting, constipation, decrease in appetite.

Forgetfulness.

Lethargy, depression, memory loss or irritability.

Muscle aches, weakness, cramping and/or twitches.

Answer:

48.67 seconds

Explanation:

From;

1/[A] = kt + 1/[A]o

[A] = concentration at time t

t= time taken

k= rate constant

[A]o = initial concentration

Since [A] =[A]o - 0.75[A]o

[A] = 0.056 M - 0.042 M

[A] = 0.014 M

1/0.014 = (1.1t) + 1/0.056

71.4 - 17.86 = 1.1t

53.54 = 1.1t

t= 53.54/1.1

t= 48.67 seconds

Hence,it takes 48.67 seconds to decompose.

Answer:

helps

Explanation:

We know

[tex]\boxed{\Large{\sf Molarity=\dfrac{No\:of\:moles\:of\:solute}{Volume\:of\:solution\:in\;\ell}}}[/tex]

[tex]\\ \Large\sf\longmapsto No\:of\:moles\:of\:HCl=0.6\times 0.12[/tex]

[tex]\\ \Large\sf\longmapsto No\:of\:moles\:of\:HCl=0.072mol[/tex]

Answer:

0.0.72

Explanation:

moles = V*CM=0.6*0.12=0.0.72

Answer:

10.77%

Explanation:

Molar mass of Cu = mass deposited/number of moles of Cu

Molar mass of Cu = 0.4391 g/6.238x10^-3 moles

Molar mass of Cu = 70.391 g/mol

%error = 70.391 g/mol - 63.546 g/mol/63.546 g/mol × 100

%error = 10.77%

Answer:

Option C. Gain 1 electron

Explanation:

Valence electron(s) are the electron(s) located on the outermost shell of an atom. Valency is simply defined as the combining power of an atom.

Chlorine (Cl) atom has 7 valence electron. This implies that Cl needs just one electron to complete it's octet configuration. It will be difficult for Cl to lose any of it's valence electron(s). Cl can either gain or share 1 electron to become stable.

Thus, considering the options given in the question above, option C gives the correct answer to the question.

Answer:

See the answer below

Explanation:

From the original equation in the image, the mole ratio of C:CO2:CO is 1:1:2. This means that for every 1 mole of C and CO2, 2 moles of CO would be produced.

Now, looking at the simulation below the equation of the reaction, 3 moles of C and 8 moles of CO2 were supplied as input. Applying this to the original equation of reaction, C seems to be a limiting reagent for the reaction because the ratio of C to CO2 should 1:1.

Hence, taking all the 3 moles of C available means that only 3 moles out of the available 8 for CO2 would be needed. 3 moles c and 3 moles CO2 means that 6 moles CO would be produced (remember that the ratio remains 1:1:3 for C, CO2, and CO). This means that 5 moles CO2 would be leftover.

In other words, all the 3 moles C would be consumed, 3 out of 8 moles CO2 would be consumed, and 6 moles CO would be produced while 5 moles CO2 would be leftover.

Answer:

See explanation

Explanation:

The molecular mass is the sum of the relative atomic masses of all the atoms in the molecule.

The relative atomic mass of reactants and products are calculated as follows;

Benzoic acid is C7H6O2 hence the molar mass of benzoic acid is ;

7(12) + 6(1) + 2(16) = 84 + 6 + 32 = 122.0 g/mol

Methyl benzoate is C8H8O2

8(12) + 8(1) + 2(16) = 96 + 8 + 32 = 136.0 g/mol

Thermochemistry has to do with  heat evolved or absorbed in a chemical reactions. Thermochemical equations are equations in which the heat of reaction is included in the reaction equation. The reaction of moles and heat of reaction is important here.

This question has to do with thermochemistry and thermochemical equations.

The answers to each of the questions are shown below;

a) 300.52 KJ

b) 11.39 g

c) 5.78 g

The equation of the thermochemical reaction is;

2C12H26 + 37O2-------> 24CO2 + 15026KJ

Number of moles of CO2 released = 21.3g/44g/mol = 0.48 moles

From the reaction equation;

15026KJ is released when 24 moles of CO2 is released

x KJ is released when  0.48 moles of CO2 is released

x = 15026KJ  * 0.48 moles/24 moles

x = 300.52 KJ

b) If 2 moles of C12H26 released 15026KJ of heat

     x moles of C12H26  released 500.00KJ

x = 2 * 500.00KJ/15026KJ

x = 0.067 moles

Mass of C12H26 consumed =  0.067 moles * 170 g/mol = 11.39 g

c) Heat gained by water = heat released by combustion of kerosene

Heat gained by water = 0.75 Kg * 4200  * (90 -10)

Heat gained by water = 252 KJ

If 2 moles of C12H26  produced 15026KJ

x moles of C12H26  produces 252 KJ

x = 2 * 252/15026

x = 0.034 moles

Mass of C12H26   = 0.034 moles *  170 g/mol = 5.78 g

For more information on thermochemical equations see

https://brainly.com/question/21492209

Answer:

4.54 atm

Explanation:

Step 1: Calculate the total number of gaseous moles

We will calculate the moles of each gas using its molar mass.

He: 5.25 g × 1 mol/4.00 g = 1.31 mol

N₂: 3.25 g × 1 mol/28.01 g = 0.116 mol

The total number of moles is:

n = 1.31 mol + 0.116 mol = 1.43 mol

Step 2: Convert 27 °C to Kelvin

We will use the following expression.

K = °C + 273.15 = 27 + 273.15 = 300 K

Step 3: Calculate the total pressure of the mixture

We will use the ideal gas equation.

P × V = n × R × T

P = n × R × T / V

P = 1.43 mol × (0.0821 atm.L/mol.K) × 300 K / 7.75 L = 4.54 atm

[tex]\\ \large\sf\longmapsto KNO_3[/tex]

[tex]\\ \large\sf\longmapsto 39u+14u+3(16u)[/tex]

[tex]\\ \large\sf\longmapsto 53u+48u[/tex]

[tex]\\ \large\sf\longmapsto 101u[/tex]

[tex]\\ \large\sf\longmapsto 101g/mol[/tex]

Now

[tex]\boxed{\sf No\:of\:moles=\dfrac{Given\:mass}{Molar\:mass}}[/tex]

[tex]\\ \large\sf\longmapsto No\:of\:moles=\dfrac{0.565}{101}[/tex]

[tex]\\ \large\sf\longmapsto No\:of\:moles=0.005mol[/tex]

We know

[tex]\boxed{\sf Molarity=\dfrac{Moles\:of\:solute}{Vol\:of\:Solution\:in\:L}}[/tex]

[tex]\\ \large\sf\longmapsto Molarity=\dfrac{0.005}{\dfrac{250}{1000}L}[/tex]

[tex]\\ \large\sf\longmapsto Molarity=\dfrac{0.005}{0.250}[/tex]

[tex]\\ \large\sf\longmapsto Molarity=0.02M[/tex]

[tex] \: \: \: \: \: \: \: \: \: [/tex]

Answer:

an aqueous species is the answer

Answer:

M of HNO₃ is 0.119M

Explanation:

A basic concept of titration is that in equivalence point:

mmoles of acid = mmoles of base

We have data from base and we only have data from volume of acid.

In a case our titration is a strong acid against a strong base.

We apply formula:

M of acid . Vol of acid = M of base . Vol of base

M of acid . 21.8 mL = 0.137M . 19 mL

M of acid = (0.137M . 19 mL) / 21.8 mL

M of acid = 0.119 M

When we neutralize all the titrant we reach the equivalence point.

At this point, pH = 7

2HNO₃  +  Ca(OH)₂ → Ca(NO₃)₂ +  2H₂O

Answer:

C

Explanation:

if we were to followw the IUPAC

Answer:

10 ms-1

Explanation:

Kinetic energy = 1/2 × m × v^2

1 = 1/2× 20 ×10^ -3 × v^2

v ^ 2 = 100

v = 10 ms-1

note : convert grams in to kg before substitution as above

Given:

Kinetic energy,

Mass,

We know the formula,

→ [tex]K.E = \frac{1}{2} mv^2[/tex]

By putting the values, we get

       [tex]1 = \frac{1}{2}\times 20\times 10^{-3}\times (v)^2[/tex]

     [tex]v^2 = 100[/tex]

       [tex]v = \sqrt{100}[/tex]

       [tex]v = 10 \ m/s[/tex]

Thus the above response is correct.

Learn more about K.E here:

https://brainly.com/question/24997625

Answer:

Hence the Solubility product,  

Ksp = [Ca2+] [Cl-]2  

or, Ksp = (4.5) (9)2  

or, Ksp = 364.5

Explanation:  

Mass of CaCl2 = 4.99 g  

Molar mass of CaCl2 = 110.98 g/mol  

Moles of CaCl2  

= given mass/ molar mass  

= 4.99/ 110.98  

= 0.045  

Volume = 10.0 mL = 0.01 L  

CaCl2 dissociates into its ion as:  

CaCl2 (s)  \rightleftharpoons Ca2+ (aq) + 2 Cl- (aq)  

At 90°C, the solution is saturated with Ca2+ and Cl- ions.

Moles of Ca2+ = Moles of CaCl2 dissolved = 0.045  

Moles of Cl- = 2 x ( Moles of CaCl2 dissolved) = 2 x 0.045 = 0.09

[Ca2+] = Moles/ Volume = 0.045/ 0.01 = 4.5 M  

[Cl-] = 0.09/ 0.01 = 9 M  

Solubility product,  

Ksp = [Ca2+] [Cl-]2  

or, Ksp = (4.5) (9)2  

or, Ksp = 364.5

Answer:

See explanation and image attached

Explanation:

The product of the Grignard reaction between methyl benzoate and excess phenylmagnesium bromide is triphenyl methanol.

The reaction proceeds by nucleophillic reaction as the carbonyl moiety is attacked. A tetrahedral intermediate is formed. Loss of the -OMe group is accompanied by the attack of the first molecule of PhMgBr.

Attack by a second PhMgBr molecule yields trimethyl phenoxide. Protonation of this specie yields the final product which is obtained by aqueous workup.

Answer:

Non-equilibrium thermodynamics is a branch of thermodynamics that deals with physical systems that are not in thermodynamic equilibrium but can be described in terms of variables (non-equilibrium state variables) that represent an extrapolation of the variables used to specify the system in thermodynamic equilibrium.

Explanation:

Answer:

pH = 2

Explanation:

Trioxonitrate (v) acid​ is also known as nitric acid (HNO₃) and is one of the strong acid set which when dissolved in water, ionizes 100%. That is,

0.01M HNO₃ => 0.01M H⁺ + 0.01M NO₃⁻ => pH = -log[H⁺] = -log(0.01) = -(-2) = 2

Answer:

True

Explanation:

Copper has the highest electrical conductivity rating of all non-precious metals: the electrical resistivity of copper = 16.78 nΩ•m at 20 °C. Specially-pure Oxygen-Free Electronic (OFE) copper is about 1% more conductive (i.e., achieves a minimum of 101% IACS).

True is the correct answer.

Answer: B. The anion affects the color of the solution more than the intensity of the color.

Explanation:

An ionic bond is gotten when an electron is transferred from a metal atom to a non-metal one. It should be noted that the ionic bonds simply has an anion and a cation.

An anion is formed when a valence election is gained by a non metal while a cation is formed when the metal ion misplaces a valence electron.

The effect of the anion of an ionic compound on the appearance of the solution is that the anion affects the color of the solution more than the intensity of the color.

The anions affect the color of the solution more than the intensity of the color.

Anions are the molecules or atoms that have one or more extra electrons in the valence cell.

When the number of electrons is increased or decreased in the solute molecule it completely change the color of the solution.

For example - Yellow chromate and orange dichromate

Therefore, the anions affect the color of the solution more than the intensity of the color.

Learn more about anion:

https://brainly.com/question/24937049

If you don't practice enough it's obviously going to be hard but if you practice enough it's going to be a piece of cake so don't think if it's going to be hard or not just think it's going to be worth the try at the very end

Answer:

The concentration of HI in the final solution is 1.3 M.

Explanation:

Dilution is the reduction in concentration of a chemical in a solution. It is achieved by adding more solvent to the same amount of solute.

In other words, in a dilution, the amount of solute does not change, but the volume of the solvent does: as more solvent is added, the concentration of the solute decreases, since the volume (and weight) of the solution increases.

When dealing with dilution you will use the following equation:

C1*V1= C2*V2

In this case:

Replacing:

3 M* 0.065 L= C2*0.15 L

Solving:

[tex]C2=\frac{3 M*0.065 L}{0.15 L}[/tex]

C2= 1.3 M

The concentration of HI in the final solution is 1.3 M.