.
You should be able to
these groups on the periodic table, and know their
properties.
Answers
Answer:
The vertical columns on the periodic table are called groups or families because of their similar chemical behavior. All the members of a family of elements have the same number of valence electrons and similar chemical properties.
Explanation:
I HOPE NAKATULONG PO AKO:)PA BRAINLEST NLNG PO SANA:(
Related Questions
what are the important features about earth plates
Answers
Deep ocean trenches, volcanoes, island arcs, submarine mountain ranges, and fault lines are examples of features that can form along plate tectonic boundaries.Because of the plates there are many things that is being made with the plates, but without the plates that makes earthquakes there wouldn't be any mountains,volcanoes, islands, fault lines, etc.For example, the San Andreas Fault couldn't have been made if it weren't for the plates.
Hope this helps! =D
Thanks have nice day
What two things do astronomers need to know about a star in order to calculate its luminosity or absolute magnitude? A.color and size B.color and distance C.distance and brightness D.size and distance
Answers
(đ) is answer of question.
Explanation:
However, the brightness of a star depends on its composition and how far it is from the planet. Astronomers define star brightness in terms of apparent magnitude — how bright the star appears from Earth — and absolute magnitude — how bright the star appears at a standard distance of 32.6 light-years, or 10 parsecs.
MARK ME AS A BRAINLIST PLZ
Astronomers measures the luminosity of stars by determining the magnitude of brightness and distance from earth.Thus option C is correct.
What is luminosity?Luminosity of a star is the total amount of energy radiated by them to a distance. The luminosity vary from star to star based on the distance to them.
Luminosity is basically measured in terms of brightness as observed from the earth. Stars will make a group in certain shapes and certain number called constellation. The overall brightness can be then higher for each constellation.
Astronomers define the brightness of stars by the apparent distance from the earth whereas the absolute magnitude is defined is terms of standard distance of 32.6 light years. Hence, the option C based on distance and brightness is correct.
To find more about luminosity, refer the link:
https://brainly.com/question/14140223
#SPJ5
If the temperature of a liquid increases, how is the average kinetic energy of
the liquid affected?
o Increase
o Remains the same
o Decrease
Answers
Which scientist is credited with developing the fist scientific atomic theory
Answers
Answer:
German chemist G.E. Stahl
Select the correct answer.
Which is true with respect to the kinetic energy of a molecule?
ОА.
it is the lowest at low temperatures
OB.
it increases at low temperatures
Oc it is the same at all temperatures
OD. it is the lowest at high temperatures
Answers
A 1.044 g sample contains only vitamin C (C6H8O6) and sucralose (C12H19Cl3O8). When the sample is dissolved in water to a total volume of 33.0 mL, the osmotic pressure of the solution is 3.69 atm at 295 K. What is the mass percent of vitamin C and sucralose in the sample?
Answers
Answer:
Refer the attachment for answer..
hope it helps you..
When acids dissolve in water, what is released into the resulting solution?
H+ and OH-ions equally
H+ (hydrogen) ions
OH- (hydroxide) ions
Answers
Answer:
H+ (hydrogen) ions
Explanation:
Answer:
H+ (hydrogen) ions
Explanation:
!! Help!! Which statement accurately describes malleability?
Answers
Answer:
B
Explanation:
Malleability describes a substance's ability to deform under pressure and heat
Examples: Gold, iron, aluminum, copper, silver, and lead. Gold and silver are highly malleable. When a piece of hot iron is hammered it takes the shape of a sheet.
What is the order of decreasing ionization energy?
1. cesium, barium, lead
2. barium, lead, cesium
3. lead, barium, cesium
4. barium, cesium, lead
5. lead, cesium, barium
6. cesium, lead, barium
Answers
write short notes on the following:1. Analytical chemist 2. Chemical engineer 3. Healthcare scientists 4. Forensic scientist 5. Research scientist 6. Toxicologists 7. Pharmaceutical chemist 8. Nuclear chemist 9. Industrial chemist.
Answers
Where is a mid-ocean ridge exposed above sea level?
Question 11 options:
Himalaya Mountains
Mariana Trench
The Big Island of Hawaii
Iceland
Answers
Answer:
ice land should be it
Explanation:
Answer:
Iceland is the answer.
Explanation:
Answer pls ASAPPP 50 pointsss!!
Answers
Answer:
There should only be one chemical reaction, this is because toasting the bread is not only using heat, but you cannot untoast the bread, and also theres a reaction with the amino acids and sugar in bread when it's cooked. I hope this helps you! :)
Answer:
One
Explanation:
One Chemical changes-It was when he toasted the bread. The heat changed the bread so that it has the crust on the outside
A scientist introduces an unknown type of particle into a cathode ray tube. The unknown particles travel in the same direction as the cathode ray. Which of the following statements is true?
A. The charge of the unknown particles is positive.
B. The charge of the unknown particles is negative.
C. The charge of the unknown particles is neutral.
Answers
Answer: B
Explanation:
A student makes two mixtures, both made of the same substances. What must be true of the two mixtures? A Both mixtures have the same density. B Both mixtures have the same temperature. C Both mixtures can be physically separated into its components. D Both mixtures are physically combined in the same proportions.
Answers
A student makes two mixtures, both made of the same substances. Both mixtures can be physically separated into its components. Therefore, option C is correct.
What is mixture ?A substance made up of two or more separate chemical compounds that are not chemically linked is referred to as a mixture. A mixture is the physical blending of two or more substances while maintaining their distinct identities. It can take the form of solutions or suspensions.
A pure substance is a single sort of matter that cannot be divided into other kinds of matter by any physical methods. A pure substance has a known and consistent composition at all times.
When two or more distinct substances physically join, a mixture is produced that can be dispersed back into its constituent parts. When two or more compounds combine to create a new substance that cannot be broken down into its constituent parts, a chemical reaction takes place.
Thus, option C is correct.
To learn more about the mixture, follow the link;
https://brainly.com/question/24898889
#SPJ6
how many atoms of hydrogen are in 4Ca(OH)2
Answers
Explanation:
there are 8 atoms of hydrogen
HELPPPPP ASAPPP PLZZZZ
Answers
Answer:
9
Explanation:
i think i dont know
maybe someone tell me if I'm wrong
Which characteristic do valence electrons indicate about reactions between atoms?
A.bond type
B.electronegativity difference
C.bond number
D.absolute electronegativity
Answers
Answer:
the answer is Bond Number
Explanation:
b r u h i just took the quiz and got the answer wrong lol
so turns out its BOND NUMBER
The whole Chemical Reaction Predictions Quick Check for Chemistry
1) chemical reaction
2) bond number
3) chemical bonds
4) C3H6O3
5) Iron oxides form when oxygen, a product of photosynthesis, is in the atmosphere
Which type of fire can help prevent
larger fires in the future?
Answers
hope it helps
Which element is most likely to lose electrons in a chemical reaction?
Group of answer choices
Mg
Cl
S
Br
Answers
Answer:
Write a hypothesis for Section 1 of the lab, which is about the effect the type of material has on the absorption of sunlight on Earth’s surface. Be sure to answer the lesson question: "What factors influence the absorption of sunlight at Earth's surface?"
Explanation:
Alan has been driving 20 mph for the last half hour. The truck next to him has been there for a while now, so Alan is
correct to assume that the
A)
)
truck is parked.
B)
speed of the truck is 10 mph.
speed of the truck is 20 mph.
D)
speed of the truck is 30 mph.
Answers
Where are halogens on the periodic table?
Answers
Is there a relationship between atomie radius and electronegativity? Why or why not?
Answers
Answer:
Yes
Explanation:
Electronegativity is the tendency for atoms to keep electrons closer to them. So, if the atoms are smaller there, there is a stronger pull on the electrons to keep them closer. So, the larger the atom get, due to electron shielding, it become less electro negative. I hope this help. You might get a better explanation from Khan Academy's video on Electronegativity
Answer:
A relationship is intuitively expected
Does electronegativity relate to atomic radius? A relationship is intuitively expected between electronegativity and radius: the size of an atom is determined by the distribution of electrons around its nucleus. The closer the electrons are to the nucleus, the more tightly they are bound, thus increasing the electronegativity of the atom.
Explanation:
ANSWER ASAP PLZ???????????????????????????????????
Answers
Answer:
The answer should be A
Explanation:
Answer:
Leaving a Copper penny in vinegar until it turns green
Explanation:
the others are physical changes. when copper penny is put in vinegar, a reactive oixde layer is formed which is green in colour. namely, Cu(II) acetate.
The green growing on the penny of copper and the rust forming on the nail of iron are chemical changes. Boiling away salt water, scraping iron filings from a mixture of sand with a magnet, and breaking a rock with a hammer, are physical changes.
pls help ASSSAPPPP!!!!
Answers
Answer:
b or d
Explanation:
Answer:
The answer is B (it's reactivity)
What does a
map
scale measure?
Answers
Answer:
Map scale refers to the relationship (or ratio) between distance on a map and the corresponding distance on the ground.
Explanation:
For example, on a 1:100000 scale map, 1cm on the map equals 1km on the ground.
A student fills two syringes: one with air and the other with an equal volume of
water. After capping the syringes, the student applies the same amount of
pressure to the plungers and records observations about the change in volume.
Based on the particle model of matter, which of the following statements best
explains the student's observations that the volume of the gas decreases greatly
but the volume of the liquid does not change noticeably?*
Gases expand to fill their containers but liquids do not because particles of gases are
free to move but particles of liquids are fixed in position.
Gases take the shape of their containers but liquids do not because gas particles
have the ability to flow but liquid particles do not.
Gases can have larger changes in volume than liquids can because gas particles
expand and contract but liquid particles do not.
Gases are more readily compressed than liquids are because there is more space
between the particles in a gas than in a liquid.
Answers
Here we need to see the differences between a liquid and a gas, and how that affects the volume and effects of pressure on them.
The correct option is:
Gases are more readily compressed than liquids are because there is more space between the particles in a gas than in a liquid.
So we have two syringes, one with air and the other with water.
The student applies the same amount of pressure to both of them, but as water is denser than air, in a given change dV of volume in the syringe, the mass of water is larger than the mass of air.
This means that for the same pressure, we should expect the change in volume to be smaller in the syringe with water.
Why this happens?
Gases are more readily compressed than liquids are because there is more space between the particles in a gas than in a liquid.
This means that for the air is easier to be compressed (the distance between particles is larger, so the same pressure compresses more a gas than a liquid) and exit the syringe than for the water, and this translates to the change in volume per unit of pressure applied, which is larger for gases than liquids.
If you want to learn more, you can read:
https://brainly.com/question/1898264
i will give u brainiest if u help me
How can a charged balloon attract a wall without any contact?
The positive charges of the uncharged wall move to the outside.
The wall changes shape and the positive charges move to the inside.
The negatively charged balloon repels and moves away from the wall.
A positive charge in the balloon attracts the negative charges in the wall
Answers
Answer:
A positive charge in the balloon attracts the negative charges in the wall
Explanation:
The question states attract, so we know it's not going to be option C.
The wall clearly doesn't change shape, so that eliminates option B as well.
The balloon gets positively charged, and so for an attractive force to appear, you need the opposite charge from the wall, i.e. negative.
Remember: opposite charges attract
Which means, the only option that makes sense is Option D.
P.S.: You could've concluded it's option D just because it's the only one that contains the word "attract" in there!
Hope I helped! :)
Answer:
a positive charge in the ballon attract the negative charge of the wall
Explanation:
If a planet's distance from the Sun is doubled, which of the following is true?
The orbital period increases.
The orbital period increases.
The eccentricity of its orbit increases.
The eccentricity of its orbit increases.
The average speed of the orbiting planet increases.
The average speed of the orbiting planet increases.
The gravitational force between the planet and the Sun increases.
Answers
Answer:
La fuerza gravitacional entre el planeta y el Sol aumenta.
Explanation:
Why do you think the term ionic is used to describe compounds formed from a metal element and a nonmetal element?
Answers
Answer:
All compounds form when atoms of different elements share or transfer electrons. Compounds in which electrons are transferred from one atom to another are called ionic compounds.
Explanation:
Because the positive and negative charges cancel out, an ionic compound is neutral in charge.
2. DEFINE CHEMICAL BOND IN YOUR OWN WORDS.
Answers
Answer:
chemical bond are bonds that are strong lasing between chemicals and irons and morecles
