Answer:
F(10)=mass(327)x acceleration(m/s)
Explanation:
Fill in the blanks about Newton’s First Law of Motion:
Objects want to ____________ ____________ doing what they’re ____________ ____________ because they are “lazy.” This is called ____________.
Objects want to continue doing what they’re doing because they are “lazy.” This is called law of inertia.
Newton's first law of motion states that an object at rest or uniform motion in a straight line will continue in that state unless it is being acted upon by an external force. This law is also called the law of inertia because it depends on mass.
From the given question, we can fill gaps as follows;
Objects want to continue doing what they’re doing because they are “lazy.” This is called law of inertia.
Learn more about Newton's first law of motion here: https://brainly.com/question/10454047
A train starts at rest and ends up with 1500 J of kinetic energy. How much work was done on the train?
Answer:
1500 J
Explanation:
Apparently, we're to assume that no energy is lost to friction or other effects. Then all of the energy the train has is due to work being done on it.
1500 J of work was done on the train
Which of the following is a completely elastic collision?
A. a ball rebounds against a wall, reversing its direction, but at only half the speed.
B. Two balls collide, stick to each other, and move together after the collision.
C. Two balls collide and move at a right angle to each other after the collision at a reduced speed.
D. Two balls collide head on, each reversing its direction and traveling at half the speed.
E. A ball with velocity v collides with a ball at rest; after the collision the first ball is at rest and the second ball has velocity v.
I will mark brainliest
Hi there!
Answer E.
For a collision to be completely elastic, there must be NO LOSS in kinetic energy.
We can go through each answer choice:
A. Since the ball rebounds at half the initial speed, there is a loss in kinetic energy. This is NOT an elastic collision.
B. A collision involving sticking is an example of a perfectly INELASTIC collision. This is NOT an elastic collision.
C. A reduced speed indicates that there is a loss of kinetic energy. This is NOT elastic.
D. The balls traveling at half the speed after the collision indicates a loss of kinetic energy, making this collision NOT elastic.
E. This collision indicates an exchange of velocities, characteristic of an elastic collision. We can prove this:
Let:
m = mass of each ball
v = velocity
We have the initial kinetic energy as:
[tex]KE = \frac{1}{2}mv^2 + 0 = \frac{1}{2}mv^2[/tex]
And the final as:
[tex]KE = 0 + \frac{1}{2}mv^2 = \frac{1}{2}mv^2[/tex]
Thus, Kinetic energy is CONSERVED. This collision is ELASTIC.
What size resistor would produce a 3 amp current flow with a 12 volt battery?
Resistance = volts / amps
Resistance = 12 volts / 3 amps
Resistance = 4 Ohms
Answer: 4 Ohms
please help quick i’ll mark you brainly
The equation below shows how to calculate work done by an applied force. W equals the work done in joules (J), F equals the applied force in newtons (N), and d equals the distance in meters (m) over which the force is applied.
W = F × d
This equation can be arranged to calculate the applied force instead:
F = W ÷ d
A scientist was performing some experiments to test the designs of some simple machines. One of her experiments involved a pulley. During the experiment, a total of 2,000 J of work was done to lift a crate 5 m straight up off the floor.
Ignoring the effects of friction, determine the applied force needed to lift the crate.
A.
2,005 N
B.
400 N
C.
10,000 N
D.
1,995 N
Answer:
The solutions to this exercise is B. 400N
How much energy is needed just to boil 5kg of water at 100◦ C?
A car starts with a velocity of 16 m/s and slows at a constant rate of -2m/s2, what is its velocity after 3 s?
After 3 seconds, the car slows down to
16 m/s + (-2 m/s²) (3 s) = 16 m/s - 6 m/s = 10 m/s
Solve the science problem
Answer:
1.hydrogen
2.helium
3. lithium
4.beryllium
5.boron
6.carbon
7.nitrogen
8.oxygen
9.fluorine
10.neon
What is chemical reaction? Give an example of each of exothermic and endothermic reaction
Answer:
A chemical reaction is a process that occurs when two or more molecules interact to form a new product(s).
Endothermic reactions are chemical reactions in which the reactants absorb heat energy from the surroundings to form products.
Example:
A popular example of an endothermic chemical reaction is photosynthesis. During this process, plants absorb energy from the Sun and convert it into carbon dioxide and water into glucose and oxygen.
An exothermic reaction releases energy into the surrounding of the system.
Example:
the chemical reaction between sodium and chlorine results in the formation of sodium chloride (also known as common salt).
The magnitude of acceleration due to gravity is
Select one:
a. 9.8 m/s
b. 8.9 m/s2
c. 4.6 m/s
Answer:
The magnitude of a gravity is always 9.8 which is later approximated to 10m/s.
Answer:
a. 9.8
Explanation:
The magnitude of acceleration due to gravity is 9.8
3. Which is not an example of energy
(5 Points)
light
thermal
heat
chemical
Answer:
Heat, Chemical
Answer:
heat is not an energy is a process.
Explanation:
A machine does 2500 J of work in 1 min. What is the power developed by the machine?
Answer:
41.7 watts
Explanation:
power=work done/time
2500/60seconds
=41.6666
What are inert gases with example
Answer:
Inert gases:An inert gas is a gas that is unreactive in its environment. The noble gases (helium, neon, argon, krypton, xenon, and radon) are considered inert in most applications. Argon is the cheapest noble gas and thus the most frequently used. In applications insensitive to chemical reactions with nitrogen, even nitrogen gas (N2) may be used as inert gas.the federal government sets upper limits for exposure to electromagnetic energy from _____ known as the sar.
The federal government sets upper limits for exposure to electromagnetic energy from telephones known as the SAR.
4. Marcia consumes 8.4 X 10.J (2000 food calories) of energy per day while maintaining a constant weight.
What is the average power she produces in a day? 97 Watts
Answer:
8.40 is your answer.
Explanation:
The average power she produces in a day be 97.22 Watts.
What is power?The quantity of energy moved or converted per unit of time is known as power in physics. The watt, or one joule per second, is the unit of power in the International System of Units. Power is also referred to as activity in ancient writings. A scalar quantity is power.
Marcia consumes total amount of energy per day = 2000 calories = 8.4 × 10⁶ joule.
1 day = 24 × 60 × 60 second = 86400 second
So, average power she produces in a day = energy/time
= 8.4 × 10⁶ joule/86400 second
= 97.22 Watts
Learn more about power here:
https://brainly.com/question/29575208
#SPJ2
12. A lathe mounted on wooden skids is to be slid down a pair of planks placed against the back of a truck.
(a) If the coefficient of friction is 0.28, what angle should the planks make with the ground in order for the lathe to slide down at constant velocity?
(b) When the planks are at this angle, will the lathe start to slide down of its own accord?
(a) The angle the planks make with the ground in order for the lathe to slide down at constant velocity is 90⁰.
(b) Yes, at this angle the lathe will start sliding at constant velocity because of the sharp steepness.
The given parameters:
coefficient of friction, μ = 0.28The net force on the wooden skids is calculated as follows;
[tex]\Sigma F = 0\\\\F - \mu mg cos\theta = 0\\\\ma - \mu mg cos\theta = 0\\\\ma = \mu mg cos \theta \\\\a = \mu g cos\theta\\\\at \ constant \ velocity , \ a = 0\\\\0 = \mu g cos \theta\\\\cos \theta = 0\\\\\theta = 90 ^0[/tex]
Yes, at this angle the lathe will start sliding at constant velocity because of the sharp steepness.
Learn more about coefficient of friction here: https://brainly.com/question/14121363
Describe the way that distance is changing in relation to tiMe
Answer:
DistaNcE chanGes iN relAtiOn tO TiMe Bc ThE fuRthEr yOu Go ThE mOrE TiMe goeS bY
What is the distance traveled by the elevator between 8 s and 24 s?
m
The distance is equal to 6 m traveled by elevator between 8 s and 24 s.
What are distance and displacement?The distance is described as the total length covered by an object. Distance is a scalar parameter with no direction. The distance covered by an object is always +ve, it can never be zero.
The displacement is described as the shortest length between two points by the object. The displacement is a vector parameter with direction & magnitude. The displacement can be +ve, -ve, or zero and can increase or decrease over time.
Given the position of the elevator at time t = 8 s at d = 9 m
The position of the elevator at time t = 24 s at d = 15 m
The distance covered by the elevator = 15 - (9) = 15 - 9 = 6 m
Therefore, the distance traveled by an elevator between 8 s and 24 s is equal to 6 m.
Learn more about distance and displacement, here:
brainly.com/question/3243551
#SPJ2
Explain how energy changes in the spring toy below when it goes downstairs.
Given what we know, we can confirm that the spring toy uses the transfer of potential gravitational energy into kinetic energy of motion in order to fall down the stairs.
How does the toy do this?The toy stores potential energy. It does this using gravity. Once it begins to fall, it uses the momentum from each fall to continue to do so. With each fall, its stored potential energy is transferred to kinetic energy.Therefore, we can confirm that the spring toy uses its position at the top of each stair as a source of potential energy, which using the momentum from the last fall, it transfers into the kinetic energy of motion as it falls, all through the help of gravity.
To learn more about energy visit:
https://brainly.com/question/999862?referrer=searchResults
A firecracker is placed in the middle of a room. When the firecracker explodes the parts of the firecracker scatter in all different directions. The total combined momentum of all the parts of the firecracker added together after the explosion must be
A.
more than before the explosion.
B.
less than before the explosion.
C.
can not tell from the given information
D.
the same as before the explosion.
Because momentum is a vector quantity, the total combined momentum of all the parts of the firecracker added together after the explosion must be the same as before the explosion. The correct answer is D
Given that a firecracker is placed in the middle of a room. This means that the firecracker is at rest. That is its momentum is equal to zero. When the firecracker is lit up, it will move in a certain velocity before it explodes. Since the total combined momentum of all the parts of the firecracker scatter in all different directions are considered, that is added up, then momentum will always be conserved. That is,
The momentum of an object before explosion will always be equal to the momentum of the object after explosion.
Because momentum is a vector quantity, in which we must consider it magnitude and direction, the best answer to this question is option D.
That is,
The total combined momentum of all the parts of the firecracker added together after the explosion must be the same as before the explosion
Learn more here: https://brainly.com/question/1141170
A vertical spring stretches 9.6 cm when a 1.3 kg block is hung from its end. (a) Calculate the spring constant. This block is then displaced an additional 5.0 cm downward and released from rest. Find the (b) period, (c) freque
Answer:
F = - K x
a) K = 1.3 kg * 9.8 m/s^2 / .096 m = 133 kg/sec^2
b) ω = (K/m)^1/2 angular frequency of SHM
ω = (133 / 1.3)^1/2 = 10.1 / sec
f = 2 π ω = 6.28 * 10.1 / sec = 63.5 / sec
P = 1/f = .0157 sec
During chemical reactions, bonds between atoms break and form. What does this mean in terms of subatomic particles? (1 point)
O Electrical fields of charged particles interact, bonding those with the same charge.
Electrical fields of neutral particles interact, bonding those with opposite charges.
O Electrical fields of neutral particles interact, bonding those with the same charge.
o Electrical fields of charged particles interact, bonding those with opposite charges
During chemical reactions, bonds between atoms break and form Electrical fields of charged particles interact, bonding those with opposite charges.
What is the chemical bonds?During chemical reactions, bonds between atoms break and form Electrical fields of charged particles interact, bonding those with opposite charges.
Since we know that every element have electrons in their atoms and every atom have vacant shells.
So during chemical reactions the elements fulfill their vacant shells and form bonds between each other it can be ionic or it can be covalent bond.
But when atoms breaks the bond their will be the positively or negatively charged electrons left in the atoms.
Hence During chemical reactions, bonds between atoms break and form Electrical fields of charged particles interact, bonding those with opposite charges.
To know more about chemical bonds follow
https://brainly.com/question/819068
A father places his daughter in a swing that is 0.60\,\text{m}0.60m0, point, 60, start text, m, end text above ground. Then he raises the swing to a height of 1.3\,\text{m}1.3m1, point, 3, start text, m, end text and lets go. The girl and the swing have a combined mass of 14\,\text{kg}14kg14, start text, k, g, end text. Assume friction is negligible and use g = 9.8\,\text{m/s}^2g=9.8m/s
2
g, equals, 9, point, 8, start text, m, slash, s, end text, squared.
Calculate the girl’s fastest speed.
This question involves the concepts of the law of conservation of energy and kinetic energy.
The girl's fastest speed is "3.7 m/s".
According to the law of conservation of energy, the girl will have the fastest speed at mean position, which will be calculated as follows:
Loss in Potential Energy = Gain in Kinetic Energy
[tex]mg\Delta h=\frac{1}{2}mv^2\\\\v=\sqrt{2g\Delta h}[/tex]
where,
v = maximum speed = ?
g = acceleration due to gravity = 9.81 m/s²
Δh = change in height = 1.3 m - 0.6 m = 0.7 m
Therefore,
[tex]v=\sqrt{2(9.81\ m/s^2)(0.7\ m)}[/tex]
v = 3.7 m/s
Learn more about the Law of Conservation of Energy here:
https://brainly.com/question/381281?referrer=searchResults
3) A 14 kg object is sitting at the top of a hill that is 100 m high. What is the potential energy of the
object?
Answer:
13,720 joules
Explanation:
Epotential = mgh
mass x gravity x height
Ep= 14 x 9.8 x 100
Ep=13,720 joules
A young diver is practicing his skills before an important team competition. Use the diagram below in order to analyze the energies of the diver and complete the statements below.
Where m = mass (kg), g = 9.8 m/s2, v = velocity (m/s), h = height (m), KE = kinetic energy (J), and GPE = gravitational potential energy (J).
Use the equations above to answer the following questions.
A diver with a mass of 90 kg is at a height of 10 m, and he has not jumped off of the board yet (v = 0 m/s). When the diver reaches a height of 5 m (Point C), his gravitational potential energy is
A. 1350 J
B. 8820 J
C. 4410 J
D. 0 J
and his velocity is
E. 4.5 m/s
F. 0 m/s
G. 3.2 m/s
H. 9.9 m/s
Please help will mark brainliest
[tex]\\ \sf\longmapsto GPE=mgh[/tex]
[tex]\\ \sf\longmapsto GPE=90(5)(9.8)[/tex]
[tex]\\ \sf\longmapsto G PE=4410J[/tex]
Now
It's converted to kinetic energy while reaching ground.
[tex]\\ \sf\longmapsto K.E=4410[/tex]
[tex]\\ \sf\longmapsto \dfrac{1}{2}mv^2=4410[/tex]
[tex]\\ \sf\longmapsto 90v^2=8820[/tex]
[tex]\\ \sf\longmapsto v^2=98[/tex]
[tex]\\ \sf\longmapsto v=9.9m/s[/tex]
Done
Answer:
Hope it will help you a lot.
Alistar places a 6.4 kg block on an incline plane that is 23 degrees above the horizontal. The block starts from rest, and in 2.2 seconds, travels 1.4 meters. What is the force of friction on the block?
fh= 6.4×23
fh=147.2
fv=2.2×1.4
fv=3.08
f=147.2+3.08
f=150.28
The force of friction on the block is 20.798 N.
What is acceleration?Acceleration is the rate at which speed and direction of velocity vary over time. Even if the speed is constant, motion on a circle accelerates because the direction is always shifting.
Due to having both direction and magnitude, it is a vector quantity. Si unit of acceleration is meter/second² (m/s²).
Given parameters:
Mass of the block: m = 6.4 kg.
Angle of inclination = 23°
Hence, Magnitude force acting along the motion = mg sin23°
= 6.4 × 9.8 × sin23° N
= 24.51 N.
The block travels 1.4 meters in 2.2 seconds. Acceleration = (2×1.4)/2.2² m/s²
= 0.58 m/s²
Hence, the force of friction on the block is = F - ma
= 24.51 N - 6.4×0.58 N
= 20.798 N
Learn more about acceleration here:
brainly.com/question/12550364
#SPJ2
Help needed for science homework
free tingsssssssssss
Explanation:
yayyy thx u soo muchihuhuhu
Answer:
thx
Explanation:
an object moves 15.0 m north and then 11.0 m south. find both the distance it has traveled and the magnitude of its displacement.
Please answer all questions if you do I mark you
Explanation:
1. A
2. B
3. I don't know this one but my guess is b
