Balance the following equations and write the corresponding ionic and net ionic equations (if appropriate):

a. CH3COOH(aq) + KOH(aq) →
b. H2CO3(aq) + NaOH(aq) →
c. HNO3(aq) + Ba(OH)2(aq) →

We can describe a positive energetic process as any process which increases the internal energy of the system.

A positive energetic reaction or process is often referred to as being Endothermic. This means that the system which is performing the process absorbs energy. Some examples include:

etc

Therefore, we can confirm that a positive energetic process is one in which the system in question absorbs energy, thus increasing its internal energy.

Since I could not locate the options online, I have provided a general explanation of the concept coupled with a few examples.

To learn more visit:

https://brainly.com/question/4345448?referrer=searchResults

Molecular substances tend to be gases because the intermolecular forces of attraction are comparatively weak. You don't have to break any covalent bonds in order to melt or boil a molecular substance.

The longest intermolecular separation and hence the strongest intermolecular pressure of attraction can be found in the gaseous state of matter.

Although solids' intermolecular interactions were sufficient to maintain themselves in locked places, gases often have weak intermolecular forces that cause them to remain considerably separated. The gases possess greater intermolecular space than solids as a result of these weak forces.

To know more about molecular forces:

https://brainly.com/question/21826959

#SPJ1

Answer:

igneous

Explanation:

key word: melt, cool. igneous rocks are when lava is melted then cooled off, then becoming a igneous rock.

Answer:

[tex]1.51 \times 1024 \: \: molecules[/tex]

Explanation:

There are 1.51 x 1024 molecules of carbon dioxide in 2.50 moles of carbon dioxide.

A. Sodium bicarbonate is a water treatment method used to soften water (removing calcium and magnesium impurities from it) in older water softener systems. The process uses a chemical reaction to convert the calcium hydroxide (or magnesium hydroxide) into calcium carbonate, which isn't water soluble.

B. Alum, also known as potassium aluminum sulfate, can be used to purify water. ... Add 1.4 ounces of alum powder to the contaminated water in the reaction vessel and carefully stir the mixture with the stirring stick for at least five minutes. Sediment will form as the phosphorous in the water binds with the alum powder.

C. If Copper sulphate crystals are added to water it is called 'hydrated copper sulphate solution'.

If it is added to cold water then:-

it is more saturated

but if it is added to warm water then:-

it is unsaturated

and it turns bluish in colour in dissolving in water

D.  Sodium hydroxide is used in the treatment of drinking water to raise the pH of the water to a level that minimizes the corrosion. Raising the pH remains one of the most effective methods for reducing lead corrosion and minimizing lead levels in drinking water.

cyanoacrylate

When cyanoacrylate polymerizes, the cyanoacrylate sticks together on an atomic level, and it becomes solid. Super Glue solidifies in all the microscopic crevices of an object that it moved into when it was a liquid, and it can form chemical bonds with any anions in the object.

Answer:

Black powder has 3 main ingredients: Sulfur ([tex]S[/tex]), charcoal ([tex]C_{7}H_{4}O[/tex]), and potassium nitrate ([tex]KNO_{3}[/tex]).

Charcoal is basically just burnt wood and potassium nitrate can easily be displaced.

Keep in mind that this is BLACK POWDER and not actual gunpowder. The difference between the both is significant since gunpowder has a lot more refining processes it has to go through to be actually used in firearms and such.

The percentage composition of black powder should be 75% Potassium Nitrate, 10% Sulfur, and 15% charcoal.

Should be noted that black powder is not a safe compound to deal with, as static friction could ignite it.

There are other alternatives to Black powder such as nitroglycerin (used in dynamites) which is way more powerful and useful in doing mines and exploration but is an extremely tricky and reactive substance to work with.

I do hope this is just for educational purposes because you need to be certified to even just experiment with this (and there are laws to synthesize such as well, which I won't take any responsibility for)

Answer:

sulfur, charcoal and potassium nitrate

Explanation:

Payback

Answer:  no

Explanation:

Atoms are not and have never been alive so they can't be considered dead. they simply do not meet any reasonable of life, primarily because they are not complex.

A white precipitate of silver chloride will be formed when Hydrogen chloride gas is passed through silver nitrate.

A white precipitate of silver chloride will be formed when Hydrogen chloride gas is passed through silver nitrate.2HCl+2AgNO³

→2AgCl+2HNO³

The reaction between AgCl and NH4OH will result in the products of Ag(NH3) 2+and Cl - ions .

AgCl+2NH 4OH→Ag(NH3) ²Cl+HH²O

Answer:

Natural causes are unintentional.

Explanation:

An example would be a wildfire. This natural disaster spreads quickly, especially in forests where wood burns easily. Destroying forests through burning causes nutrients to get depleted, and organisms die.

Answer:

1. any class of adhesives, plastics, or other materials that are polymers of epoxies.

2. something like glue or resin

Explanation:

that's the dictionary definition of epoxy.

Answer:

d. 10

Explanation:

The 24 means the atomic mass and twelve means the number of electrons. You subtract the number of electrons from the atomic mass. 24-12=12

Then, since there's +2, you subtract 2 from 12 which equals 10 which means there are 10 electrons now.

The confusing thing is that + means subtract and - means add here.

Hope this helps.

Answer:

Meteorology

Explanation:

Meteorology focuses on Earth's atmosphere and, especially, how changes in the atmosphere affect weather and climate on Earth's surface.

There are 0.566 moles of carbonate in sodium carbonate.

Learn more about number of moles at: https://brainly.com/question/1542846

that' the answer i don't need an explanation

Answer:

It’s in the photo, sorry if it’s really messy!

Explanation:

Please ask if you have any questions!

Answer:

D — All of them

Explanation:

The activation energy in a reaction is the minimum amount of energy required for a chemical reaction to take place. Since all the options are processes in a chemical reaction, D should be the answer.

they both refract white light.

Answer:

They both reflect white light.

Explanation:

How raindrops and prism are similar?

Raindrops and prisms are similar because they both cause light to bend when it enters a prism or raindrop. When light enters a raindrop it causes the light to bend (refract) and separates the white lights into different wavelengths, allowing us to see the individual colors of the rainbow.

Answer:

self-pollination.

Explanation:

When the pollen of the flower is transferred to the stigma of the same flower, it is called self-pollination. Cross-pollination occurs when pollen is transferred from one flower to another flower on the same plant, or another plant.

[tex]\huge \bf༆ Answer ༄[/tex]

The element having valency of 1 is ~

Answer: Pretty sure this is d.) sodium

Explanation:

Answer:

3rd  lawl

Explanation:

a rifle kick is when you fire a projectile and you feel a force pushing against your hand. Rifles normally have heavier projectiles so there is more force pushing back against you. example, if you were sitting on a spinny chair with wheeles and your friend is sitting on another, and you push each other while on the chair, you will both go backward, but the lighter person will go back more. for every action, there is an equal and opposite reaction

that is the third law, also said as: "When one body exerts a force on a second body, the second body simultaneously exerts a force equal in magnitude and opposite in direction on the first body."

Answer:

Personally, I use Superglue

Explanation:

600 kg·m/s

Mass = 200 kg

Velocity = 3 m/s

Power = Mass * Velocity = 200 kg * 3 m/s = 600 kg·m/s

Answer:

the answer is NO or nitric oxide.

hope this helps, love. have a good day

Explanation:

Empirical formula is the simplest whole number ration of elements in a compound. Molecular formula is n times the empirical formula, where n is integers 1,2,... Therefore, the empirical formula is NO[tex]_2[/tex].

Empirical formula gives the proportion of the element that is present in a compound. It does not give information about the actual number or the arrangements of the atoms.

The relation between molecular formula and empirical formula can be given as

n= molecular formula÷ empirical formula

Number of gram atoms in compound and divide by smallest Number of gram atoms in compound

N=(25.94%)÷14=1.85/1.85=1

O=( 74.06% )÷16=4.62/1.85=2

The atomic ratio is 1:2

Whole number N:O is1:2

Empirical formula corresponding to this whole number is NO[tex]_2[/tex].

Therefore, the empirical formula is NO[tex]_2[/tex].

To know more about empirical formula, here:

https://brainly.com/question/21743699

#SPJ2

The first image shown at the left hand side is a pi bond. The other two images show sigma bonds.

In chemistry, a bond results from the overlap of atomic orbitals. This overlap may be end to end (sigma bond) or side by side (pi bond). Having said this, it is easier to decide whether the bonds in the image shown are sigma or bi bonds.

If we label the images; 1,2,3 from left to right, we can see that the overlap in image 1 is side by side. The electron density lies above and below the plane of the bond. This is a pi bond. In images 2 and 3, the overlap occurs in an end to end manner. This is a sigma bond.

Learn more: https://brainly.com/question/14018074