Answer all questions please and be quick, it’s very URGENT

Answer:

At standard temperature and pressure, 44.8

Explanation:

Answer: Well 0-7 is acid, and 0-3 is a strong acid. 4-7 is a weak acid. 8-11 is strong base. 12-14 is weak base!

Explanation:

I didn't learn about that topic in school,but I found this :

I hope it helps<3

Answer:

since the distance between the electron and the nucleus is smaller in B than in Li, the electrostatic nuclear force of attraction experienced by B is higher than the one experienced by Li...this translates to the higher first ionization energy in B than in Li.

Explanation:

i hope it's helping!

The rate constant for the decomposition of ethanol on an alumina surface is 24.00 × 10²⁵ M.

The rate law is: rate = 24.00 × 10²⁵ M/s

The integrated rate law is: [C₂H₅OH]t = [C₂H₅OH]₀ - 24.00 × 10²⁵ M/s × t

If the initial concentration of C₂H₅OH was 1.25 × 10²² M, the half-life is 2.60 × 10⁻⁵ s.

The time required for all the 1.25 × 10²² M C₂H₅OH to decompose is 5.21 × 10⁻⁵ s.

Let's consider the decomposition of ethanol on an alumina surface.

C₂H₅OH(g) ⇒ C₂H₄(g) + H₂O(g)

The plot of [A] vs time (t) resulted in a straight line, which indicates that the reaction follows zero-order kinetics.

The slope, 24.00 × 10²⁵ M/s, represents the rate constant, k.

It is a chemical reaction in which the rate of reaction is constant and independent of the concentration of the reacting substances

The rate law for zero-order kinetics is:

rate = 24.00 × 10²⁵ M/s

The integrated rate law for zero-order kinetics is:

[C₂H₅OH]t = [C₂H₅OH]₀ - 24.00 × 10²⁵ M/s × t

Is the time for the amount of substance to decrease by half.

If the initial concentration of C₂H₅OH was 1.25 × 10²² M, we can calculate the half-life [t(1/2)] using the following formula.

t(1/2) = [C₂H₅OH]₀ / 2 × k

t(1/2) = (1.25 × 10²² M) / 2 × (24.00 × 10²⁵ M/s) = 2.60 × 10⁻⁵ s

We can calculate the time required for all the 1.25 × 10²² M C₂H₅OH to decompose using the integrated rate law.

[C₂H₅OH]t = [C₂H₅OH]₀ - 24.00 × 10²⁵ M/s × t

0 M = 1.25 × 10²² M - 24.00 × 10²⁵ M/s × t

t = 5.21 × 10⁻⁵ s

The rate constant for the decomposition of ethanol on an alumina surface is 24.00 × 10²⁵ M.

The rate law is: rate = 24.00 × 10²⁵ M/s

The integrated rate law is: [C₂H₅OH]t = [C₂H₅OH]₀ - 24.00 × 10²⁵ M/s × t

If the initial concentration of C₂H₅OH was 1.25 × 10²² M, the half-life is 2.60 × 10⁻⁵ s.

The time required for all the 1.25 × 10²² M C₂H₅OH to decompose is 5.21 × 10⁻⁵ s.

Learn more about zero-order kinetics here: https://brainly.com/question/13314785

Answer:

Distillation, or classical distillation, is the process of separating the components or substances from a liquid mixture by using selective boiling and condensation. Dry distillation is the heating of solid materials to produce gaseous products

Answer:

Explanation:

Distillation, or classical distillation, is the process of separating the components or substances from a liquid mixture by using selective boiling and condensation. Dry distillation is the heating of solid materials to produce gaseous products.

Sodium chloride reacts with copper sulfate to produce sodium sulfate and copper chloride.

2NaCl(aq) + CuSO4(aq) → Na2SO4(aq) + CuCl2(s)

+

This equation represents a

O synthesis reaction.

O decomposition reaction.

O single replacement reaction.

O double replacement reaction.

double replacement reaction

ありがとう！

Sodium chloride reacts with copper sulfate to produce sodium sulfate and copper chloride. This equation represents a double replacement reaction. Therefore, the correct option is option D.

In a double replacement process, the ions in two input ionic compounds are exchanged for the same ions in two new product compounds. When two reactants swap cations or anions to produce two new products, the process is known as a double replacement reaction.

Double displacement reactions and metathesis reactions are other names for double replacement processes. Double replacement reactions include neutralisation, precipitation, and gas production. Sodium chloride reacts with copper sulfate to produce sodium sulfate and copper chloride. This equation represents a double replacement reaction.

Therefore, the correct option is option D.

To know more about double replacement reaction, here:

https://brainly.com/question/30783535

#SPJ5

The balance of forces allows to find the result for the question if the isotope of boron 9.99 una  is stable:

The stability of atomic nuclei depends on the balance the force is electrostatic repulsion between the protons and the strong interaction of attraction.

One way to achieve this balance is to increase the separation of the protons with uncharged particles between them, the neutral ones, the strong interaction is of the same magnitude for protons and neutrons, therefore the repulsion is decreased and the strong attraction interaction is maintained. .

In the case of Boron, which has 5 protons, the stable structures have more atomistic 10 and 11 una, which is why it has 5 and 6 neutrons each. Therefore each proton has  a neutrons next to it and in the other case a proton at the end has two neutrons, this causes the distance between the protons to increase, decreasing the electrostatic repulsion.

It indicates that we have a Boron nucleus of mass 9.999. The number of protons must remain fixed, therefore there are only 4 neutrons.

Consequently, some of the protons does not have a neutron next to it and can approach the other proton, therefore the electrostatic repulsion increases and the stability of the atom decreases.

In conclusion, using the balance of Forces we can find the result for the question if the isotope of boron 9.99 una is stable:

Learn more about nuclear stability here: https://brainly.com/question/897383

Answer:

Law of the Sea Treaty

LOST Local Option Sales Tax (special purpose tax)

LOST Linux One Stanza Tips

LOST Liberty Owners Special Team

LOST Looking Over Strange Terrain :-)

LOST Line Of Sight Tasking

Explanation:is this what you meant?

Answer:

empirical formula

Answer:

c

Explanation:

c is the correct answer

Answer:

c

Explanation:

B. silver tarnishing

Answer:

C

Explanation:

When Beta decay happens, the atomic number of an element goes up, and that means there is an extra proton. A is not the answer because unstable atoms cause decay. B is also not correct because this is what happens in Beta decay: a neutron becomes a proton. D is not correct because an electron is actually emitted from the nucleus.

Answer:

Earth

Explanation:

Answer:

Earth

Explanation:

Hope this helps! Pls give brainliest! Also, please sub to Kgirl633 on yt.

Even in pitchblende, polonium is exceedingly rare: 1,000 tons of ore must be treated to yield 40 milligrams of polonium. It has a one-part-in-ten-thousandth-thousandth-thousandth-thousandth-thousandth-thousandth It is found in nature as a byproduct of the radioactive decay of uranium, thorium, and actinium.

Atomic Number: 210

Answer:

Biocompatibility

Explanation:

I’m a genius and it’s the answer :D

Biocompatibility is a challenge of prosthetic engineering that has been met through tissue engineering. Hence, option B is correct.

Biocompatible materials are used in medical devices, such as menstrual cups, stents, or ventilators.

A biocompatibility problem might happen when some of the materials are trapped in the patient's gingival sulcus.

Tissue engineering is an important field of regenerative medicine for tissue repair (after damaged caused by a disease or an accident, for example).

To offer this possibility, stem cells are important tools owing to their capacity to differentiate into a large number of cells according to the stimuli provided.

Hence, option B is correct.

Learn more about Biocompatibility here:

https://brainly.com/question/16037547

#SPJ2

-30°F is warmer than -30°C.

The -ve sign is used when the temperature drops down. Celsius is the greater unit. By converting, -30°F = -1.11°C (approx.) We know that, -1.11 > -30. So, -30°F (-1.11°C) is warmer than -30°C.

Formula :-

(x°C × 9/5) + 32 = y°F

_____

Hope it helps ⚜

Answer:

-30 c is warmer

Explanation:

-30 c =-22 f

-30 f=-34.444 c

Answer:

Because it goes through the process of sublimation.

Explanation:

Answer:A

Explanation

:

The student paid an interest of $3,000 over the next five years.

HOW TO CALCULATE INTEREST:

The interest on a borrowed amount of money can be calculated by subtracting the principal from the amount paid over time. That is;

Interest = principal - amount

According to this question, a student borrows $10,000 from a bank but ends up paying $13,000. This means that the principal is $10,000 while the amount is $13,000. The interest is calculated thus;

Interest = $13,000 - $10,000

Interest = $3,000

Therefore, the student paid an interest of $3,000 over the next five years.

Learn more about interest at: https://brainly.com/question/4626564

Answer:

[tex]\left[\begin{array}{cc}Oak\ Leaves&Decrease\\Caterpillar&Decrease\\Blue\ Jay&Decrease\end{array}\right][/tex]

Because the fungus is killing the oak leaves, the caterpillars will have less food and die out, resulting in a decrease in blue jay populations.

Hope it helps :) and let me know if you want me to elaborate.

Answer:

c. all matter is composed of small particles,which combine to make larger objects

Answer:

you dony have a picture for me to match them

Explanation:

Answer:

F,E,D,C, B, A, G, H, I

Explanation:

I think. It goes bottom to top. the fault probably cause g to happen and maybe h but mattering on what caused what I am not positive

Answer:

List the known and unknown quantities and plan the problem. Change each percent abundance into decimal form by dividing by 100. Multiply this value by the atomic mass of that isotope. Add together for each isotope to get the average atomic mass

Explanation:

Explanation:

List the known and unknown quantities and plan the problem. Change each percent abundance into decimal form by dividing by 100. Multiply this value by the atomic mass of that isotope. Add together for each isotope to get the average atomic mass.

Answer:

The atomic mass of second isotope is 7.016

Explanation:

Given data:

Average Atomic mass of lithium = 6.941 amu

Atomic mass of first isotope = 6.015 amu

Relative abundance of first isotope = 7.49%

Abundance of second isotope = ?

Atomic mass of other isotope = ?

Solution:

Total abundance = 100%

100 - 7.49 = 92.51%

percentage abundance of second isotope = 92.51%

Now we will calculate the mass if second isotope.

Average atomic mass of lithium = (abundance of 1st isotope × its atomic mass) +(abundance of 2nd isotope × its atomic mass)  / 100

6.941 = (6.015×7.49)+(x×92.51) /100

6.941 =  45.05235 + (x92.51) / 100

6.941×100 = 45.05235 + (x92.51)

694.1 - 45.05235   = (x92.51)

649.04765 = x 92.51

x = 485.583 /92.51

x = 7.016

The atomic mass of second isotope is 7.016

____________________________________________________

(Hope this helps can I pls have brainlist (crown)☺️)

Answer: 50 M

Explanation:

Mass

Formula used

I'm a pharmacy dispenser which is the same thing. what's your question?