Active energy is a characteristic of _______ energy.

Answer:

  170 N

Explanation:

Impulse is the change in momentum. Momentum is the product of mass and velocity. These are related to applied force by ...

  F·Δt = m·Δv

__

Here, the velocity goes from 0 to 34 m/s in 0.0116 s. The mass is 0.058 kg. Filling in the given values, we have ...

  F(0.0116 s) = (0.058 kg)(34 m/s)

  F = 0.058×34/0.0116 kg·m/s² ≈ 170 N

The required force is 170 newtons.

The image as shown here can here can be used to describe charging by induction.

A charge may be positive or negative. One of the methods of transferring a charge is by induction.

In this case, an objects induces an opposite charge on a material.  The image as shown here can here can be used to describe charging by induction.

Learn more about charging by induction:https://brainly.com/question/10254645

#SPJ4

Answer:

friction

Explanation:

When plug fuses are used on all new installations such as in a disconnect switch for a clothes dryer, the fuses must be type S.

Type S fuses are also called tamper proof fuses because each fuse size has a different base and thread size.

These fuses also require the use of a special adapter which is screwed into the standard Edison base of the fuse holder.

Thus, when plug fuses are used on all new installations such as in a disconnect switch for a clothes dryer, the fuses must be type S.

Learn more about fuse here: https://brainly.com/question/20877754

#SPJ1

The option that can be expressed in light years is " the distance between two stars." The correct option is B.

A light-year is a unit of distance used to measure astronomical distances. It is defined as the distance that light travels in one Earth year in the vacuum of space, which is approximately 9.46 trillion kilometers (5.88 trillion miles). Light travels at a speed of about 299,792,458 meters per second (or approximately 186,282 miles per second), which means that in one year, light can cover a distance of 9.46 trillion kilometers. Light years are commonly used to measure the distance between stars and galaxies, and since space is vast, other units of distance are often not practical.

Here in the Question,

A] The age of a rock is a measure of time, usually in millions or billions of years, and cannot be expressed in light years, which is a unit of distance.

C] The speed at which the Earth revolves around the sun is measured in kilometers per second or miles per hour and represents a velocity, not a distance. Hence it cannot be expressed in light years.

D] The time it takes for Earth to complete a revolution around the sun is measured in days or years and is again a measure of time, not distance. So it cannot be expressed in light years.

Therefore, Only B The distance between two stars is a measure of distance, which can be expressed in light years since it is a vast distance and other units may not be suitable.

To learn about Kepler's third law click:

https://brainly.com/question/1608361

#SPJ3

Answer:

2.13 x 10^-5

Explanation:

light travels at 3.00 x 10^8 m/s

it's like if someone asks how long would it take for a car to go 100 miles if it's traveling 50 miles per hour

you would do

100 ÷ 50

6.4 x 10^3 ÷ 3.00 x 10^8

2.13 x 10^-5

1. The length of the bridge is 360 m.

2. The speed of train in km/hr to cross the bridge in 24 s is 72 km/hr.

3. The length of the train when it cross the bridge in 36 seconds is 540 m.

What is speed?

Speed is the ratio of distance traveled and the time taken to cover that distance.

1.

The speed of train m/s is 54 x 5/18 = 15 m/s

The train crosses the bridge in 32 s, distance traveled by train will be

=32 x 15 =480m

The length of the bridge = (480 -120) =360 m

Thus, the length of the bridge is 360 m.

2.

Speed of train in m/s to cross the bridge in 24 s

= 480/24 = 20 m/s

Speed in km/hr =20 x 18/5 = 72 km/hr

Thus, Speed of train in km/hr to cross the bridge in 24 s is 72 km/hr.

3.

Speed of train in m/s =15 m/s

Train crosses the bridge in 36 s, then length of train will be

= 15 x 36m = 540m

Thus,  the length of the train when it cross the bridge in 36 seconds is 540 m

Learn more about speed.

https://brainly.com/question/7359669

#SPJ1

Both rocks hit the ground at the same time and at the same distance from the base of the cliff. Option A is correct.

Speed is defined as the rate of change of the distance or the height attained. it is a time-based quantity. it is denoted by u for the initial speed while u for the final speed. its SI unit is m/sec.

If the  resistance is ignored, things falling near the Earth's surface have the same estimated acceleration due to gravity of 9.8 meters per second.

As a result, the objects' acceleration is the same, and their velocity is growing at a consistent pace.

So that both rocks hit the ground at the same time and at the same distance from the base of the cliff.

Hence, option A is correct.

To learn more about the sped, refer to the link;

https://brainly.com/question/7359669

#SPJ1

Answer:26.7 and 7.4

Explanation:

So, first you add all the time up then the area travelled.

Firstly; 45 mins + 300 minutes(5 hours) + 165 minutes(2.75 minutes)= 510 minutes

Secondly; 42.2KM + 180.5KM + 3.86KM= 226.56KM

Finally: For hourly you would do: 510 divided by 60 to get 510 mins in terms of hours: so, 8.5 hours then you would do 226.56KM divided by 8.5 hours to get: 26.7Km/hr

For m/s: 7.4m/s

The markdown price for a mountain bike is $584.35

Markdown price is the discount offered by the shopkeepers to the customers to increase the sales rate.

M.P = S.P (1-r/100)

The following expression can be used every time we have to find the markdown price.

Substitute Selling price S.P =$899 and the percent r =35/100 =0.35, we get

M.P = $899(1-0.35)

M.P =$584.35

Thus, the markdown price is $584.35

Learn more about markdown price.

https://brainly.com/question/15218116

#SPJ1

#1

Here

Calcium is less reactive than sodium so it can't displace Na .

Nothing will happen

#2

This is oxidation

Answer: True

Explanation:

A scalar quantity is those quantities that only have magnitude and no direction. Therefore the value doesn't change with direction.

Answer:

0.12m/s

Explanation:

v=λf

Given that, λ = 12cm = 0.12m

T = 1second

(A period T is the time required for one complete cycle of vibration to pass a given point)

frequency 'f' is unknown but we can get frequency from f = 1/T = 1/1 = 1Hz

therefore, v= 0.12 × 1 = 0.12m/s

Answer:

the density of water is 1 and tin is 7.31 if i remember right

Explanation:

The mass of the accelerated object is 9kg.

According to this law, the force is equal to the product of mass of the object and its acceleration.

F =ma

Given is the force F =45 N and the acceleration is 5 m/s², then the mass will be

m = F/a

m = 45/5

m =9kg

Thus, the mass of the object is 9kg.

Learn more about force.

https://brainly.com/question/13191643

#SPJ1

Answer:9.17 m|s

Explanation:

explanation shown

Apply conservation of momentum

[tex]\\ \rm\Rrightarrow m1v1+m2v2=(m1+M2)v3[/tex]

[tex]\\ \rm\Rrightarrow 0.045(400)+16(0)=(0.045+16)V3[/tex]

[tex]\\ \rm\Rrightarrow 18=16.045v3[/tex]

[tex]\\ \rm\Rrightarrow v3=1.12m/s[/tex]

Answer:

See below

Explanation:

Vertical position = 45 +  20 sin (30) t  - 4.9 t^2

 when it hits ground this = 0

               0 = -4.9t^2 + 20 sin (30 ) t + 45

                0 = -4.9t^2 + 10 t +45 = 0     solve for t =4.22 sec

  max height is at  t= - b/2a = 10/9.8 =1.02

     use this value of 't' in the equation to calculate max height = 50.1 m

      it has  4.22 - 1.02 to free fall = 3.2 seconds free fall

           v = at = 9.81 * 3.2 = 31.39 m/s VERTICAL

      it will also still have horizontal velocity =  20 cos 30 = 17.32 m/s

        total velocity will be sqrt ( 31.39^2 + 17.32^2) = 35.85 m/s

Horizontal range = 20 cos 30  * t  =  20 *  cos 30  * 4.22 = 73.1 m

Answer:

1)10 m/s

2) 20 m/s

3) 2 s

4) 500 m

5)1000 km/h

Average speed = distance travelled / time.

( note: distance must be in (m) and time in sec, if not then you convert ).

1) average speed = 20/2 = 10mls.

2) average speed = 100/5 = 20 m/s.

3) since we aren't given (time) let's call it x

so we replace the unknown time with x..

average speed = 2/x = 1

then cross multiply

you get x (the unknown time) as 2s {seconds}.

(to check if it's correct just add the time we got back into the equation and see if you would get a erage speed as 1m/s).

4) do the same, replace distance as x or any letter you want )

average speed = x/ 10 = 50

cross multiply

you get x = 500m {meters}

5) (we need to convert km to meters and time to secs because that's what we are working with).

200km = 200,000 m { to convert to meters you multiply the given by 1000, 1km = 1000m).

for 2h, we know that:

60 seconds makes 1 minute

60 minutes makes an hour.

so we multiply 60 by 60 we get 3600mins then we multiply it by 2 to get 7200 secs

so now

Average speed = 200,000/7200 = 27.77 m/s.

Here you go..

hope this helps

Good luck and ace that test.

The increase in temperature that will result if 225.0 g of copper absorbs 5000 J of heat energy is 57.72°C.

The temperature change of a substance can be calculated using the following formula:

Q = m × c × ∆T

Where;

5000 = 225 × 0.385 × ∆T

5000 = 86.63∆T

∆T = 5000/86.63

∆T = 57.72°C

Therefore, the increase in temperature that will result if 225.0 g of copper absorbs 5000 J of heat energy is 57.72°C.

Learn more about temperature change at: https://brainly.com/question/11464844

#SPJ1

Answer:

The answer is A. White Dwarf

Explanation:

Use the work-energy theorem. The total work W performed on the car as it it slows to a stop is equal to the change in the car's kinetic energy ∆K. So

W = ∆K

W = 0 - 1/2 (1000 kg) (72 km/h)²

W = - (500 kg) (20 m/s)²

W = - 200,000 J = -2 × 10⁵ J

The closest answer would be C, but friction opposes the car's motion so the work would be negative.

The quantity of heat that was transferred to the block of iron is 5544 J or 5.544 kJ

From the question, we are to determine how much heat was transferred to the block of iron

Using the formula,

Q = mcΔT

Where Q is the quantity of heat

m is the mass

c is the specific heat capacity of the substance

and ΔT is the change in temperature

From the given information,

m = 0.400 kg

ΔT = 325 - 295 = 30 K

Putting the parameters into the equation, we get

Q = 0.400 × 462 × 30

(NOTE: Specific heat capacity of iron = 462 J/kg.K)

∴ Q = 5544 J

Hence, the quantity of heat that was transferred to the block of iron is 5544 J or 5.544 kJ

Learn more on Calculating quantity of heat here: https://brainly.com/question/13439286

#SPJ1

Answer:

5 meters

Explanation:

4  and  3   are legs of a right triangle with the hypotenuse = displacement

Use Pythagorean theorem

4 ^2 + 3^2 = (displacement)^2

displacement = 5 m

The displacement of the object that moved 4 meters north, then 3 meters east is 5 meters.

Displacement is change in the position of an object. It can be described as the shortest distance between the initial and final position of an object.

The displacement of the object is calculated as follows;

d² = 4² + 3²

d² = 25

d = 5 m

Thus, the displacement of the object that moved 4 meters north, then 3 meters east is 5 meters.

Learn more about displacement here: https://brainly.com/question/2109763

#SPJ2

A net forward force as well as gravitational force pulls the marble downwards whereas frictional force slows it down.

A force is an agent which causes a change in the motion or state of an object.

Forces are of two types:

Andrew applies force on the marble causing it to move.

When Andrew pokes the marble, he gives it net forward force. As the marble rolls down the ramp, gravitational force pulls it down.

The movement of the marble is slowed down by frictional force from the ramp.

Therefore, a combination of applied force and gravitational force moves the marble forward, while frictional force slows it down.

Learn more about force at: https://brainly.com/question/141439

#SPJ4

Answer:

Applied, Gravitational, and Frictional.

Explanation

hope it helps :)

Inboard gasoline boats built after July 31st, 1981 must have a mechanical type of ventilation system.

A mechanical ventilation system can be defined as a device in which circulates fresh/cold currents of air.

A mechanical ventilation system is based on the use of systems of ducts capable of ventilating the device.

In conclusion, inboard gasoline boats built after July 31st, 1981 must have a mechanical type of ventilation system.

Learn more about mechanical ventilation systems here:

https://brainly.com/question/17234224

#SPJ1

Answer:

Explanation:

I'm assuming you need this answer quickly.

Using what we know:

The energy of a single 400 nm photon is 3.1 eV.

So a photon of 412 nm wavelength would have the energy of 4.0 ev.