Answer:
An object is in motion when its distance from another object is changing. A reference point is a place or object used for comparison to determine if something is in motion. An object is in motion if it changes position relative to a reference point.
option C is your CORRECT answer
What does the term conservation mean?
A. The process of changing used materials into new products
B. The process of removing pollution from a natural resource
C. Consistent overuse of renewable resources
D. The protection and careful use of natural resources
==============================
[tex] \large \sf \underline{Question:}[/tex]
What does the term conservation mean?==============================
[tex] \large \sf \underline{Answer:}[/tex]
[tex] \qquad \qquad \huge \bold{Option \: D}[/tex]
==============================
[tex] \large \sf \underline{Explanation:}[/tex]
From the term or word itself "Conservation" or in other words conserve, it directly means the protection and careful use of natural resources.==============================
which vector has an x component with a length of 3?
Answer:
A) b.
Explanation:
all the details are in the attached picture.
Which one is evidence that electricity is flowing?
A motor in a circuit is not moving
The battery is connected
A light bulb shines
Answer:
C. A light bulb shines
Explanation:
When electricity flows through a circuit and powers the light bulb, the light bulb would shine.
The answer isn't B because if the battery was only connected to the circuit without the circuit being turned on by the switch, electricity would not flow from the battery to the light bulb.
What fitness components can impact a soccer players performance?
A) Dribbling, passing, shooting and heading
B) Physical, emotional, and cognitive factors
C) Cardiovascular, muscular strength/power, muscular endurance
D) None of the above
Answer:
C) Cardiovascular, muscular strength/power, muscular endurance
Explanation:
I did take the quiz
Answer:
C) Cardiovascular, muscular strength/power, muscular endurance
Explanation:
Dodgems A has a mass of 120 kg, is initially moving to the right at a speed of 10 m/s. It collides with Dodgems B, which has a mass of 160 kg, moving to the right at a speed of 7 m/s. After collision, Dodgems A continues to move to the right but with a speed of 5 m/s. What is the speed of Dodgems B after collision?
Answer:
10.75 m/s
Explanation:
let velocity of Dodgems b be y
law of conservation of momentum
120 x 10 + 160 x 7=120x5+ 160 x y
1200+1120 = 600 + 160 x y
160y = 1720
y = 10.75 m/s
Some aliens traveling in a group know that their spaceship launchpad is 25 miles from the gas station where they are right now. How many kilometers is that distance?
The distance between the aliens traveling in group and their launchpad in kilometers is 40.23km.
How many kilometers is that distance?Given that data in the question;
Distance d = 25 milesDistance in kilometers = ?Note that;
1 miles = 1.609 kilometers
Now, the distance in kilometers will be;
distance = 25 miles
distance = ( 25 × 1.609 )kilometers
distance = 40.23km
Therefore, the distance between the aliens traveling in group and their launchpad in kilometers is 40.23km.
Learn more about speed here: brainly.com/question/7359669
#SPJ1
Arrangement is used to increase the resistance in a circuit.
Resistors connected in parallel
Resistors connected in alternate
Resistors connected in series
Resistors connected in combination
Answer:
Resistors connected in series
There are five appliances: an air conditioner (1000 W), a refrigerator (450 W), a washing machine (500 W), a popcorn popper (250 W), and a stereo (20 W). What are the three highest-power appliances that can be plugged into two outlets and be running at the same time? The maximum current capacity of the circuit is 15 A, and the outlets provide 120 V. (HINT: Find the current of each appliance). SHOW YOUR WORK.
The three highest-power appliances that can be plugged into two outlets and be running at the same time are air conditioner, washing machine and popcorn popper.
Current of each appliance
The current of each appliance is calculated as follows;
P = IV
I = P/V
air conditioner (1000 W), I = 1000/120 = 8.33 A
refrigerator (450 W), I = 450/120 = 3.75 A
washing machine (500 W), I = 500/120 = 4.17 A
popcorn popper (250 W), I = 20/120 = 0.17 A
The three highest-power appliances that can be plugged into two outlets;
8.33 A + 4.17 A + 0.17 A = 12.67 A, which is less than 15 A.
Thus, the three highest-power appliances that can be plugged into two outlets and be running at the same time are air conditioner, washing machine and popcorn popper.
Learn more about power here: https://brainly.com/question/13881533
#SPJ1
A student repeats a reaction several times to test the effects of various
changes on the reaction rate. The data table shows the results. How does
increasing the temperature of the system change thereaction rate?
A. Increasing the temperature decreases the reaction rate.
B. Increasing the temperature increases the reaction rate.
C. More information is needed to determine what happens to the reaction rate.
D. Increasing the temperature has no effect on the reaction rate.
Answer:
The correct answer is - C. Increasing the concentration increases the reaction rate.
Explanation:
Answer:
B. Increasing the temperature increases the reaction rate.
Explanation:
The reaction time column displays how long the reaction ran for. If a reaction rate was fast then time taken for reaction to run would be slow right?
Therefore, original condition had reaction time of 10 second, but increaseing temperature lowered the time to 5 second, which must mean that reaction rate increased.
3. A female minke whale has a core body temperature of 35°C and a core/blubber interface temperature of 29°C, with an average blubber thickness of 4.0 cm and thermal conductivity of 0.25 W/mK. At what rate is energy lost from the whale's core by conduction from the core/blubber interface through the blubber to the skin? Assume a skin temperature of 12°C and a total body area of 22 m².
The rate at which energy is lost from the whale's core from the core/blubber interface through the blubber to the skin is 3,162.5 W.
Rate of conduction of core/blubber interfaceThe rate of conduction of core/blubber interface is calculated as follows;
[tex]\frac{Q}{t} = \frac{kA\Delta T}{d}[/tex]
where;
k is thermal conductivity = 0.25 W/mkA is the total body area = 22 m²d is thickness of blubber = 4 cm = 0.04 mΔT is change in temperature[tex]\frac{Q}{t} = \frac{kA\Delta T}{d} = \frac{kA}{d} (\Delta Ta \ +\Delta Tb)\\\\\frac{Q}{t} = \frac{kA}{d} ((T_1- T_2 \ +\ T_2-T_3)\\\\\frac{Q}{t} = \frac{0.25 \times 22}{0.04} ( 35 - 29 \ + \ 29 - 12)\\\\\frac{Q}{t} = 137.5( 6 + 17)\\\\\frac{Q}{t} = 3,162.5 \ W[/tex]
Thus, the rate at which energy is lost from the whale's core from the core/blubber interface through the blubber to the skin is 3,162.5 W.
Learn more about conduction here: https://brainly.com/question/893656
#SPJ1
Explain the mechanism of hearing
Explanation:
The pinna collects the sound waves and conducts them to the auditory canal. Sound waves struck at the ear drum and set it into vibration. Eustachian tube equalizes the pressure on either side of the ear drum and thus allows it to vibrate freely. Ear drum transmits the vibrations to ear ossicles.
• Kelley and Raul are moving a 95 kg desk to the right. If the coefficient of friction between the desk and the floor is 0.29, what is the force of friction that will oppose the motion of the desk?
f = μk.N (N = m.g)
f = 0.29 x 95 x 10
f = 275.5 N
The magnitudes of the electric potential and of the electrostatic force depend on which factors? O
A. Mass and distance O
B. Distance and amount of charge O
C. Density and amount of charge O
D. Mass and amount of charge
Answer:
Density and amount of charge O
what particle moves from one object to another so that the object is either positively charged or negatively charged
Answer:
electrons move causing the object to be positive or negative charged
calculate how much charge passes through the LED in 1 hour if the current flowing in the circuit below is 350mA
Given the the current flowing in the circuit and the elapsed time, the charge that passes through the LED is 1260 Coulombs.
What is Current?Current is simply the rate of flow of charged particles i.e electrons caused by EMF or voltage.
If a charge passes through the cross-section of a conductor in a given time, the current I is expressed as;
I = Q/t
Where Q is the charge and t is time elapsed.
Given the data in the question;
Time elapsed t = 1hr = 3600sCurrent I = 350mA = 0.35ACharge Q = ?We substitute our given values into the expression above to determine the charge.
I = Q/t
Q = I × t
Q = 0.35A × 3600s
Q = 1260C
Therefore, given the the current flowing in the circuit and the elapsed time, the charge that passes through the LED is 1260 Coulombs.
Learn more about current here: brainly.com/question/3192435
#SPJ1
Which of these objects must have the greatest force acting on it? pls help fast
A. A baseball being dropped to the ground.
B. A baseball being tossed 1 meter into the air.
C. A paper airplane being tossed across the room.
D. A bowling ball being tossed 1 meter into the air.
Let's look at Newton's second law
F=maForce is directly proportional towards mass
If mass is more force will be more.
Between baseball and bowling ball Bowling ball has higher mass
So it would expert most force
Option D
A block of mass 8 m can move without friction
on a horizontal table. This block is attached
to another block of mass 34 m by a cord that
passes over a frictionless pulley.
If the masses of the cord and the pulley
are negligible, what is the magnitude of the
acceleration of the descending block?
Answer:
Let M1 = 8 kg and M2 = 34 kg
F = M a = (M1 + M2) a
F = M2 g the net force accelerating the system
M2 g = (M1 + M2) a
a = M2 / (M1 + M2) g = 34 / (42) g = .81 g = 7.9 m/s^2
A reversible reaction is in
_______ when forward and reverse
directions of the reaction occur at the same rate so there is no overall change in the
amounts of reactants and products.
Answer:
Equilibrium
Explanation:
Equilibrium is a special situation or stage of a reactionAt equilibrium the concentrations of reactants and products are equalThe rate of change of forward and backward reaction is also sameWhen the ultrasound beam strikes the surface at or nearly at right angles, the fraction of sound energy that is reflected (R) at the interface between two materials of acoustic impedance Z1 and Z2, respectively, is given by:
Explanation:
the expression of x= -4t+2t^2 where x is displecement?Ahmad pulls a sled across level snow by 75 N . If the sled moves 15 m , how much work does Ahmad do on the sled?
Answer:
1125 J
Explanation:
W=F x s
= 75 x 15
=1125
Which is the load
Answer:
A is the load in the diagram
Answer:
i think the answer is A
if earth struck by a small asteroid how will the hours of daylight and night change?
Answer:
Nothing
Explanation:
We get struck by small asteroids. imperciptable changes in our degree of tilt and rate of rate of rotation
the diagram aeroplane banking to make a horizontal turn .The aeroplane is travelling at a speed of 75ms-1 and the radius of the turning circle is 800m
The centripetal acceleration of the aeroplane is determined as 7.03 m/s².
Centripetal acceleration of the aeroplaneThe centripetal acceleration of the aeroplane is calculated as follows;
ac = v²/r
where;'
v is the speed of the aeroplaner is the radius of the pathac = (75²)/(800)
ac = 7.03 m/s²
Thus, the centripetal acceleration of the aeroplane is determined as 7.03 m/s².
Learn more about centripetal acceleration here: https://brainly.com/question/79801
#SPJ1
Which statement is true about this magnet and nails?
The nails are permanent magnets.
Both the magnet and the nails are permanent magnets.
Both the magnet and the nails are temporary magnets.
The nails are temporary magnets.
Answer: The nails are temporary magnets.
Explanation:
A permanent magnet is a magnet that will stay magnetized, while a temporary magnet will lose magnetism.
The magnet here is a permanent magnet, so the "Both the magnet and the nails are temporary magnets." option is incorrect.
The nail is a temporary magnet, so this narrows the options down to our answer;
The nails are temporary magnets.
You can read more here: https://brainly.com/question/2841288
If an amount of heat Q is needed to increase the temperature of a solid metal sphere of diameter D from 4°C to 7°C, the amount of heat needed to increase the temperature of a solid sphere of diameter 2D of the same metal from 4°C to 7°C is
Answer:
Q = c M ΔT where c is the heat capacity and M the mass present
Q2 / Q1 = M2 / M1 since the other factors are the same
M = ρ V where ρ is the density
M = ρ Π (d / 2)^2 where d is the diameter of the sphere
M2 / M1 = (2 D/2)^2 / (D/2)^2 = 4
It will take 4Q heat to heat the second sphere
Which statements correctly describe the effect of distance in determining the gravitational force and the electrical
force? Check all that apply.
The gravitational force has an infinite reach.
The electrical force has an infinite reach.
The gravitational force is inversely proportional to the distance.
U The electrical force is inversely proportional to the distance.
O The gravitational force is inversely proportional to the square of the distance.
O The electrical force is inversely proportional to the square of the distance.
The statements 1,4 and 5 accurately describe the influence of distance on gravitational and electrical forces.
What is Newton's law of gravity?Newton's law of gravity states that each particle having mass in the universe attracts each other particle with a force known as the gravitational force.
Gravitational force is proportional to the product of the masses of the two bodies and inversely proportional to the square of their distance.
Decreasing the distance would increase the gravity of the planet.
The following statements accurately describe the influence of distance on gravitational and electrical forces.
1. The gravitational force has an infinite reach.
4. The gravitational force is inversely proportional to the square of the distance.
5. The electrical force is inversely proportional to the square of the distance.
Hence, options 1,4 and 5 are correct.
To learn more about Newton's law of gravity refer to the link;
brainly.com/question/13428472
#SPJ1
A projectile is shot at initial speed v0 = 8.94 m/s with angle theta = 26.5 degree as shown. It reaches the distance x = 24 m.
Find height h of the cliff, your answer should be positive.
A projectile is shot with the initial speed, it follows the motion called projectile motion. The height of the cliff is 44.91 m.
What is initial speed?The speed at the start of the motion is the initial speed.
The horizontal distance is
x = v₀ sin θ. t
Substitute 26.5 for θ, 24 for x and 8.94 m/s for x, we get the time taken to complete the journey.
t = 24/ (8.94 cos26.5) = 3 s
Maximum height reached
H = v₀²sin²θ/2g
H = (8.94)² x sin²( 26.5) /(2 x 9.8)
H =0.8118 m
The height of the cliff is obtained by the equation of motion
0.8118 - h = -1/2 gt² +v₀sinθ.t
Substitute the values, we get
h =0.8118 +1/2x9.8x (3)²
h =44.911m
Thus, the height of the cliff is 44.91 m.
Learn more about initial speed.
https://brainly.com/question/19348675
#SPJ1
A simple pendulum has length of 820mm. Calculate the frequency (g = 9.8 ms -2)
Answer:
[tex]\huge\boxed{\sf f=0.55 \ Hz}[/tex]
Explanation:
Given Data:
Length = l = 820 mm = 0.82 m
Acceleration due to gravity = g = 9.8 ms⁻²
Required:
Frequency = f = ?
Formula:
[tex]\displaystyle f =\frac{1}{2 \pi} \sqrt{\frac{g}{l} }[/tex]
Solution:
[tex]\displaystyle f =\frac{1}{2 \pi} \sqrt{\frac{g}{l} } \\\\Put\ the\ givens\\\\f=\frac{1}{2 \pi} \sqrt{\frac{9.8}{0.82} }\\\\ f = 0.159 \times \sqrt{11.95} \\\\f=0.159 \times 3.457\\\\f=0.55 \ Hz\\\\\rule[225]{225}{2}[/tex]
Anujan and Piragavy are pulling on either side of a box with ropes. Anujan rope pulls with a force of 35 N [35° N of W], while Piragavy pulls with a force of 11 N [41° S of E]. There is a frictional force of 6 N [s] opposing the motion. Calculate the following: The Fnet and the acceleration of the object.
The net force on the block is 20.678 N. Force is defined as the product of mass and acceleration. Its unit is Newton.
What is force?Force is defined as the push or pull applied to the body. Sometimes it is used to change the shape, size, and direction of the body.
Anujan rope pulls with a force of 35 N [35° N of W]. The force is resolved in x and y direction as;
[tex]\rm F_{1x}= 35 cos 35^0 \\\\ F_{1y}=35 sin 35^0[/tex]
Piragavy pulls with a force of 11 N [41° S of E]. The force is resolved in x and y direction as;
[tex]\rm F_{2x}= 11 cos 41^0 \\\\ F_{2y}=11 sin 41^0[/tex]
The net force on the block is;
[tex]\rm F_{net}=F_{1x}-F_{2x}\\\\\ F_{net}=35 \ cos 35^0- 11 \cos 41^0 \\\\ F_{net}=20.678 \ N[/tex]
Hence,the net force on the block is 20.678 N.
To learn more about the force refer to the link;
https://brainly.com/question/26115859
#SPJ1
A 3 kg toy plane is attached to a 1.8 m string that it can be whirled around in a horizontal circle above the users head. If one’s exerts a force of 10 N on the string, what speed should the plane have as it rotates
With the use of formula, The plane should rotate at the speed of 3 m/s
Circular MotionWhen a body is moving rotationally at a point, the motion is said to be a circular motion. There are two types of motion in a circle
Vertical circular motionHorizontal circular motionGiven that a 3 kg toy plane is attached to a 1.8 m string that it can be whirled around in a horizontal circle above the users head rotates.
The given parameters are:
mass m = 3 kg
Length L = 1.8 m = radius
Force F = 10 N
Velocity V = ?
If one’s exerts a force of 10 N on the string, The speed the plane should have can be calculated by using the below formula
F = M[tex]V^{2}[/tex] / r
Substitute all the parameters into the formula
10 = 3 x [tex]V^{2}[/tex] / 1.8
Cross multiply
18 = 3[tex]V^{2}[/tex]
[tex]V^{2}[/tex] = 18/3
[tex]V^{2}[/tex] = 9
V = [tex]\sqrt{9}[/tex]
V = 3 m/s
Therefore, The plane should rotate at the speed of 3 m/s
Learn more about circular motion here: https://brainly.com/question/23272034
#SPJ1
