A spring has a spring constant of 5 N/m and is stretched 10 m. What its U,?
a. 50 J
b. 70 J
c. 90 J
d. 250 J

Answer:

0.48N

Explanation:

according to the second law of motion

force=mass×acceleration

the mass in this question is 0.025,the acceleration 19

therefore f=0.025×19

=0.48N

I hope this helps

Answer:

it gravitional pull on earth will increased becauste it is compress to a form of moon which is comperatively smaller so the gravitonal pull on per cm of earth will incrased so we can say that there will be change in acceleration due to gravity

Answer:

Power = I * V = 2.5 C/s * 5 J/C = 12.5 J/s = 12.5 watts

Regardless of the efficiency the power consumed is that used by the converter.

E = P * t = 12.5 J/s * 4500 s = 4500 J

Answer:

accelerating.

Explanation:

A horse is running on a circular path with constant speed but its direction is changing at every point. Thus, it is accelerating.

Answer:

X = 24.135 kilometres

Explanation:

Given the following data;

Distance = 15 miles

To convert the value in miles to kilometers;

Conversion:

1 mile = 1.609 kilometres

15 miles = X kilometres

Cross-multiplying, we have;

X = 1.609 * 15

X = 24.135 kilometres

(a) The work done by force in lb-ft is 300 lb-ft.

(b) The change in potential energy of the object is 200 lb-ft.

The work done by force in lb-ft is calculated as follows;

W = Fd

W = 30 x 10

W = 300 lb-ft

The change in potential energy of the object is calculated as follows;

ΔP.E = P.Ef - P.Ei

ΔP.E = 20 x 10 - 0 = 200 lb-ft

Learn more about work done here: https://brainly.com/question/8119756

#SPJ2

Answer:

It was created during the French Revolution in 1799 and has enabled for the international exchange of scientific and technical information. Calculating with SI units is also a lot easier than using the English system.

Explanation:

It was first developed during the French Revolution in 1799 and has allowed for the sharing of scientific and technical information on an international level. Performing computations using SI units is also much easier to use than the English system. Thanks

Answer:

a. Bar A is a magnet

b. Bar B is a metal or magnetic material

c. Bar D is a non-magnetic material

Explanation:

a. Bar A

Since B attracts both A and C, it shows that A and C are both magnetic. So, it is either B and A are magnets or B and C are magnets or A and C are magnets. Also, since A and C sometime attract one another and sometimes repel one another, it means that they attract when their poles are opposite and repel when their poles are negative. This show that both A and C are magnets. Thus, A is a magnet.

b. Bar B

Since B is attracted to both A and C and we know that both A and C are magnets, it implies that B is a magnetic material. Since it does not repel either A or C.

c. Bar D

Since D does not attract A, B or C, D is a non-magnetic material. Since, only a magnetic material can be attracted to magnets and we have established that both A and C are magnets and that B is magnetic. Since D is not also attracted to B, it implies that D is thus non-magnetic.

answer is

Answer:

[tex] \green{ \sf \: \: 1.6 \: m {s}^{ - 2} \: \: \: is \: the \: correct \: answer}[/tex]

Explanation:

[tex] \sf \: \huge{g } _{ \small{moon}} = \frac{ {\huge{g}}_{earth}}{6} \\ \\ \sf \implies \: \sf \: \huge{g } _{ \small{moon}} = \frac{ 9.8}{6} = 1.6 \: \: m {s}^{ - 2} [/tex]

Answer:

vf²=vi²+2a∆x

Explanation:

The third equation of motion gives the final velocity of an object under uniform acceleration given the distance traveled and an initial velocity: v 2 = v 0 2 + 2 a d . v^2=v_0^2+2ad. v2=v02+2ad. The graph of the motion of the object.

Answer:

334m/s

Explanation:

If you take the data you gave and insert it into the equation f=v/λ the frequency would come out to be 3.34m

334 m/s is  the Velocity of sound in air.

Wave velocity in common usage refers to speed, although, properly, velocity implies both speed and direction.

The velocity of a wave is equal to the product of its wavelength and frequency (number of vibrations per second) and is independent of its intensity.

Mathematically , v=fλ

According to the question,

Sound frequency (f)  = 100Hz

Wavelength (λ)= 3.34m

Computing the values in the formula,

v=fλ

v = 100Hz x 3.34m

v= 334m/s

Therefore,

Velocity of sound in air is 334 m/s.

Learn more about  velocity of a wave here:

https://brainly.com/question/1292129

#SPJ2

Answer:

The centripetal acceleration of the stone is 5 m/s²

Explanation:

The length of the string to which the stone is attached, r = 1 m

The speed with which the string is rotated, v = 5 m/s

The centripetal acceleration, [tex]a_c[/tex], is given as follows;

[tex]a_c = \dfrac{v^2}{r}[/tex]

Therefore, the centripetal acceleration of the stone found as follows;

[tex]a_c = \dfrac{(5 \ m/s)^2}{1 \ m} = 5 \ m/s^2[/tex]

The centripetal acceleration of the stone, [tex]a_c[/tex] = 5 m/s².

Unit is the quantity of a constant magnitude which is used to measure the magnitudes of other quantities of the same nature.

Answer:

The standard known quantity which is used to measure a physical quantities is known as unit.

Answer:

Wavelength = 5 * 10^{-11} meters

Explanation:

Given the following data;

Frequency = 6.0 x 10^18 Hz

Speed = 3 * 10⁸ m/s

To find the wavelength of the wave;

Mathematically, the wavelength of a wave is given by the formula;

[tex] Wavelength = \frac {speed}{frequency} [/tex]

Substituting into the formula, we have;

[tex] Wavelength = \frac {3 * 10^{8}}{6.0 x 10^{18}} [/tex]

Wavelength = 5 * 10^{-11} meters

Answer:1

Explanation:1

Answer:

the angle of banking is 33.3 degree.

Explanation:

speed, v = 99 mi/h = 44.26 m/s  

radius, r = 1000 ft = 304.8 m

g = 9.8 m/s^2

Let the angle of banking is A.

[tex]tan A = \frac{v ^2}{r g}\\\\tan A = \frac{44.26^2}{304.8\times 9.8}\\\\tan A = 0.66\\\\A = 33.3^0[/tex]

Answer:The answer is A

Explanation:just did it on a test

Answer:

A. When the independent variable is continuous and shows a causal link to the dependent variable.

Explanation:

A graph can be defined as the graphical representation of data (informations) on horizontal and vertical lines i.e x-axis and y-axis respectively.

In an experiment , the variable being manipulated by an experimenter is known as an independent variable while the dependent variable is the event expected to change when the independent variable is manipulated

Generally, a line graph should be used when the independent variable is continuous and shows a causal link to the dependent variable.

This ultimately implies that, a line graph should be used when the data changes continuously over time and as such there exist a linear relationship between the data (variables).

Answer:

i think its 4 or 35

Explanation:

its in the middle of 40 and 30

Answer:

The temperature of the gas is 350.02 K.

Explanation:

The average speed is related to the temperature as follows:

[tex] \bar v = \sqrt{\frac{3RT}{M}} [/tex]   (1)

Where:

[tex] \bar v [/tex]: is the average speed = 1477 m/s

R: is the gas constant = 8.31 J/(K*mol)                                                  

T. is the temperature =?

M: is the molar mass

First, let's find the molar mass:

[tex] M = \frac{m}{n} [/tex]

Where:

m: is the mass of the gas = 0.008 kg

n: is the number of moles = 2 mol

[tex] M = \frac{m}{n} = \frac{0.008 kg}{2 mol} = 0.004 kg/mol [/tex]

Hence, by solving equation (1) fot T we have:

[tex] T = \frac{\bar v^{2}*M}{3R} = \frac{(1477 m/s)^{2}*0.004 kg/mol}{3*8.31 J/(K*mol)} = 350.02 K [/tex]

Therefore, the temperature of the gas is 350.02 K.

I hope it helps you!            

Answer:

Acceleration, a = 295.36 m/s²

Explanation:

Given the following data;

Final velocity = 41.35 m/s

Initial velocity = 0 m/s

Time = 0.140 seconds

To find the acceleration, we would use the first equation of motion;

V = U + at

Where;

V is the final velocity.

U is the initial velocity.

a is the acceleration.

t is the time measured in seconds.

Substituting into the equation, we have;

41.35 = 0 + a*0.140

41.35 - 0 = 0.140a

41.35 = 0.140a

Acceleration, a = 41.35/0.140

Acceleration, a = 295.36 m/s²

Answer:

hello

Explanation:

hello dost timi kasto cha

Answer:

Part 1; The total energy = Constant = 200 J

Part 2; Midway, the potential energy = The kinetic energy = 100 J

Explanation:

Part 1

According to the first law of thermodynamics, energy is neither created nor destroyed but changed from one form to another

The total (mechanical) energy = Potential energy + Kinetic energy = Constant

The kinetic energy given to the ball changed vertically up = 200 J

Potential energy = Mass, m × Gravity, g × Height, h

Given that the mass m of the ball and the acceleration due to gravity, g, remain the same, we have;

Potential energy ∝ The height of the ball

The potential energy at ground level = 0 J (Height , h = 0)

∴ The total (mechanical) energy = 0 J + 200 J = 200 J

At the maximum height, the ball momentarily stops, and the kinetic energy = 0 J

Therefore;

The potential energy of the ball at the maximum height, [tex]h_{max}[/tex], [tex]P.E._{max}[/tex] = 200 J

∴  [tex]P.E._{max}[/tex] = m·g·[tex]h_{max}[/tex] = 200 J

Part 2

At midway we have, the height, h = ([tex]h_{max}[/tex])/2

Therefore, [tex]P.E._{Midway}[/tex] = (m·g·([tex]h_{max}[/tex]))/2 = ([tex]P.E._{max}[/tex])/2 = (200 J)/2 = 100 J

The potential energy midway = 100 J

The  remaining 200 J - 100 J = 100 J is the kinetic energy remaining in the ball

The kinetic energy midway = 100 J

Therefore, the total energy midway = 100 J + 100 J = 200 J

Answer:

The force from the truck on the car is always equal to the force from the car on the truck.

Explanation:

According to Newton's third law; action and reaction are equal and opposite. Hence, when the big truck and small passenger car are involved in a collision, we expect that the force from the truck on the car is always equal to the force from the car on the truck. The forces on the car and the truck are equal in magnitude but opposite in direction.

This follows directly from Newton's third law of motion hence the answer above.

Answer:

25 mm = 0 deg C

200 mm = 100 deg C

200 - 25 = 175 = change in thread per 100 deg C

95 - 25 = 70 mm - change in thread from 0 deg C

70 / 175 * 100 = 40 deg C    final temperature at 95 mm

Answer:

 F = 7.68 10¹¹ N,  θ = 45º

Explanation:

In this exercise we ask for the net electric force. Let's start by writing the configuration of the charges, the charges of the same sign must be on the diagonal of the cube so that the net force is directed towards the interior of the cube, see in the attached numbering and sign of the charges

The net force is

          F_ {net} = F₂₁ + F₂₃ + F₂₄

bold letters indicate vectors. The easiest method to solve this exercise is by using the components of each force.

let's use trigonometry

          cos 45 = F₂₄ₓ / F₂₄

          sin 45 = F_{24y) / F₂₄

          F₂₄ₓ = F₂₄ cos 45

          F_{24y} = F₂₄ sin 45

let's do the sum on each axis

X axis

          Fₓ = -F₂₁ + F₂₄ₓ

          Fₓ = -F₂₁₁ + F₂₄ cos 45

Y axis  

         F_y = - F₂₃ + F_{24y}

         F_y = -F₂₃ + F₂₄ sin 45

They indicate that the magnitude of all charges is the same, therefore

         F₂₁ = F₂₃

Let's use Coulomb's law

         F₂₁ = k q₁ q₂ / r₁₂²

the distance between the two charges is

         r = a

         F₂₁ = k q² / a²

we calculate F₂₄

           F₂₄ = k q₂ q₄ / r₂₄²

the distance is

           r² = a² + a²

           r² = 2 a²

we substitute

           F₂₄ = k  q² / 2 a²

we substitute in the components of the forces

          Fx = [tex]- k \frac{q^2}{a^2} + k \frac{q^2}{2 a^2} \ cos 45[/tex]

          Fx = [tex]k \frac{q^2}{a^2}[/tex]  ( -1 + ½ cos 45)

          F_y = k \frac{q^2}{a^2} ( -1 +  ½ sin 45)    

We calculate

            F₀ = 9 10⁹ 4.25² / 0.440²

            F₀ = 8.40 10¹¹ N

            Fₓ = 8.40 10¹¹ (½ 0.707 - 1)

            Fₓ = -5.43 10¹¹ N

remember cos 45 = sin 45

             F_y = - 5.43 10¹¹  N

We can give the resultant force in two ways

a) F = Fₓ î + F_y ^j

          F = -5.43 10¹¹ (i + j)   N

b) In the form of module and angle.

For the module we use the Pythagorean theorem

          F = [tex]\sqrt{F_x^2 + F_y^2}[/tex]

          F = 5.43 10¹¹  √2

          F = 7.68 10¹¹ N

in angle is

           θ = 45º

Explanation:

Measurement plays an important role in our daily lives because they are useful to do basic tasks, such as taking the temperature of a child with the help of a thermometer,making time estimations,measure out medicines and find out weights, areas and volumes of different substances

Let m be the mass of both cubes. If the smaller cube has side length x, then its volume is x ³. The side lengths of the larger cube have length 4x, so the larger cube's volume is (4x)³ = 64x ³, or 64 times as large as the smaller cube.

The first cube has a density of m/x ³, while the larger one has a density of m/(64x ³) = 1/64 m/x ³, so the ratio of densities is (1/64):1, or 1:64 (larger cube to smaller cube).

A simulation study that is used to learn about a planet by simulating as many conditions as possible, you can visualize what the planet might be like and learn things about it without actually visiting it. The correct option is c.

A simulation is a method of simulating a process or change in the actual world to forecast future events or to explain past events and their causes. These days, simulations are frequently carried out using computers. Scientists use simulations to find answers and to test complicated systems.

A fire drill is used in this instance to get everyone ready for an impending event. In fire drills, the fire alarm is sounded even when there isn't actually a fire.

Therefore, the correct option is c.

To learn more about simulation, refer to the link:

https://brainly.com/question/16359096

#SPJ2