A scientist who studies the tiny microorganisms of the environment .

geologist
meteorologist
microbiologist
entomologist

Answers

Answer 1

Question:- A scientist who studies the tiny microorganisms of the environment

Answer:- Microbiologist

Explanation:-

Microbiologist means a person who studies micro sized living organisms

Microbiologist word is combination of two words Micro and biologist

Micro stands for objects which cannot be seen with the naked eyes and are very small in sizeBiologist a person who studies living forms.
Answer 2

Answer:

microbiologist i think

hope it helps

please mark Brainliest if you think the answer is correct


Related Questions

When a low-pressure gas of hydrogen atoms is placed in a tube and a large voltage is applied to the end of the tube, the atoms will emit electromagnetic radiation and visible light can be observed. If this light passes through a diffraction grating, the resulting spectrum appears as a pattern of four isolated, sharp parallel lines, called spectral lines. Each spectral line corresponds to one specific wavelength that is present in the light emitted by the source. Such a discrete spectrum is referred to as a line spectrum.
What is the wavelength of the line corresponding to n =4 in the Balmer series? Express your answer in nanometers to three significant figures. EVO AV Om ? X (n) = 4.86.10? By the early 19th century, it was found that discrete spectra were produced by every chemical element in its gaseous slale. Even though these spectra were found to share the common feature of appearing as a set of isolated lines, it was observed that each element produces its own unique pattern of lines. This indicated that the light emitted by each element contains a specific set of wavelengths that is characteristic of that element. Submit Previous Answers Request Answer X Incorrect; Try Again; 19 attempts remaining

Answers

Answer:a)   λ = 4.862 10⁻⁷ m,  b)  λ = 4.341 10⁻⁷ m

Explanation:

The spectrum of hydrogen can be described by the expression

         

in the case of the initial state n = 2 this series is the Balmer series

a) Find the wavelength for n = 4

       

let's calculate

          = 1,097 10⁷ ()

         \frac{1}{ \lambda} = 1.097 10⁷ 0.1875 = 0.2056 10⁷

          λ = 4.862 10⁻⁷ m

b) n = 5

           

    \frac{1}{ \lambda} = 1,097 10⁷ ()

    \frac{1}{ \lambda} = 1.097 10⁷ 0.21 = 0.23037 10⁷

     λ = 4.341 10⁻⁷ m

halp me please i will give brainly

Answers

Answer: It should be the 3rd option down!

Explanation:

Answer: C

Explanation:

A 70 kg hunter, standing on frictionless ice, shoots a 42 g bullet horizontally at a speed of 650 m/s . Part A What is the recoil speed of the hunter

Answers

Answer:

Explanation:

momentum is conserved. Initial momentum was zero, so final total momentum must also be zero

0.042(650) + 70v = 0

v = -0.39 m/s

|v| = 0.39 m/s

someone plz help
An object accelerates from rest to 93 m/s over a distance of 49 m. What acceleration did it experience?

Answers

Answer:

Explanation:

v² = u² + 2as

a = (v² - u²) / 2s

a = (93² - 0²) / (2(49))

a = 88.255102...

a = 88 m/s²

How does an emergency action plan benefit your workplace

Answers

Anything can happen at any moment. And if you have a plan for anything it will make things easier for you.

A CD has a diameter of 12.0 cm. If the CD is rotating at a constant angular speed of 200 revolutions per minute, then the tangential velocity of a point on the circumference is:

Answers

Hi there!

Converting from angular velocity to tangential velocity can be done by:

v = ωr

v = tangential velocity (m/s)

ω = angular velocity (rad/sec)

r = radius (m)

Convert 12 cm to meters:

100 cm = 1 m

12 cm = 0.12 m

Now, convert rev/min to rad/sec:

[tex]{\frac{200rev}{min}} * \frac{1min}{60s} * \frac{2\pi rad}{1 rev} = 20.94 rad/sec[/tex]

v = 20.94 · 0.12 = 2.51 m/s

help with this please

Answers

Answer:

I think that those are all true but I'm not completely sure.

If a particle undergoes SHM with amplitude 0.17 mm , what is the total distance it travels in one period

Answers

Answer:

Particle travels 4 * amplitude in one period = .68 mm

If an object accelerates from rest, what will its velocity be after 1.3 s if it has a constant acceleration of 9.1 m/s^2?

Answers

[tex]\text{Given that,}\\\\\text{Initial velocity,} ~v_0 = 0~ \text{m~s}^{-1}\\\\\text{Time, t = 1.3~sec}\\\\\text{Acceleration, a = 9.1 m s}^{-2}\\\\\\\\\text{Velocity,}\\\\v = v_0 +at\\\\\implies v = 0 + 9.1 \times 1.3 = 11.83~~ \text{m~s}^{-1}[/tex]

Your friend's Frisbee has become stuck 19 m above the ground in a tree. You want to dislodge the Frisbee by throwing a rock at it. The Frisbee is stuck pretty tight, so you figure the rock needs to be traveling at least 4.1 m/s when it hits the Frisbee.

If you release the rock 1.8 m above the ground, with what minimum speed must you throw it?

Answers

Answer:

18.36 m/s

Explanation:

We can solve this using conservation of energy. The energy in the system will be conserved since there are no outside forces acting upon it so the potential energy and kinetic energy will be equal. Giving us this formula to start:

1/2mv^2=mgh

m=mass

g=gravity

h=height

v=velocity

We can start by figuring out the total height the rock travels which we can do by subtracting the height of the frisbee by the height the rock started at.

19m-1.8m=17.2m

Now we can plug in our variables to solve for velocity.

First we negate mass since its on both sides and cancels out leaving us with.

1/2v^2=gh

Plug in.

1/2v^2=(9.8)(17.2)

1/2v^2=168.56

v^2=337.12

v=18.36m/s

A .223 rifle bullet, traveling at 370.m/s, hits a block of pine wood, and goes in, to a depth of 0.130m. The mass of the bullet is 1.75g (mass = 0.00175kg). Assume a constant slowing force. (A) What is the acceleration that the bullet experiences as it comes to a stop? (B) How much time is required for the bullet to stop? (C) What force, in Newtons, does the wood exert on the bullet?

Answers

Answer:

Explanation:

A)

v² = u² + 2as

a = (v² - u²) / 2s

a = (0² - 370²) / (2(0.130))

a = -526,538 m/s²

B)

t = v/a

t = 370 / 526538

t = 0.0007027... s or 0.7 ms

C)

F = ma

F = 0.00175(526,538) = 921.442307... = 921 N

A 200-kg, 2.0-m-radius, merry-go-round in the shape of a flat, uniform, circular disk parallel to level ground is rotating at 1.2 cycles/second about an axis through its center of mass and perpendicular to the ground. A 50-kg boy jumps onto the edge of the merry-go round and lands at a fixed point. What is the angular velocity of the merry-go-round after the boy lands on it

Answers

Answer:

Explanation:

Conservation of angular momentum.

Disk            I = ½MR²

Point mass I = mR²  (boy)

Initial angular momentum

L₀ = Iω = ½MR²ω₀

Final angular momentum

L₁ = Iω = (½MR² + mR²)ω₁

as momentum is conserved, these are equal

(½MR² + mR²)ω₁ = ½MR²ω₀

                       ω₁ = ω₀(½MR²/ (½MR² + mR²))

                       ω₁ = ω₀(½M/ (½M + m))

                       ω₁ = 1.2(½(200)/ (½(200) + 50))

                       ω₁ = 1.2(⅔)

                      ω₁ = 0.8 cycles/second or 0.8(2π) = 1.6π rad/s

There is a bell at the top of a tower that is 45 m high. The bell weighs 15 kg. The bell has energy. Calculate it.

Answers

Answer:

6621.75J

Explanation:

In this case, the bell is not in motion. So we are going to calculate its potential energy rather than its kinetic energy since kinetic energy is the energy a body possesses in motion.

The formula for the potential energy is m*g*h, meaning the mass * acceleration due to gravity * height. Here the mass, m = 15kg, the acceleration due to gravity = 9.81m/s^2, and the height, h = 45m

Substituting our values, the answer becomes 15 * 9.81 * 45 = 6621.75J. Hope you understood my explanation?

A spring in a dart gun is compresscht a distance of 0.05 m. The spring has a spring constant
of 1,115 N/m. If the dart has a mass of 0.025 kg, determine the velocity of the dart as it
leaves the dart gun.

Answers

Answer:

Explanation:

ASSUMING that the dart is fired horizontally so that gravity potential energy considerations are not needed. Also ignoring friction work.

The spring potential will convert to kinetic.

KE = PS

½mv² = ½kx²

     v = [tex]\sqrt{kx^2/m}[/tex]

     v = [tex]\sqrt{1115(0.05^2)/0.025}[/tex]

     v = 10.55935...

     v = 11 m/s

Name the energy possessed by hot air

Answers

Answer:

geothermal energy

Explanation:

the energy is obtained from the heat within the surface of earth

Answer:

heat energy

Explanation:

which statement about metals is true?

Answers

All metals are solid at (our) living temperatures except for mercury which is a liquid. Metals are shiny for a while at least when properly finished. Metals are good conductors of both heat and electricity. This is due to the excess electrons in their valence clouds that facilitate energy transfer.What are 5 characteristics of metal?

Metals are lustrous, malleable, ductile, good conductors of heat and electricity

Silver conducts electricity better than any other metal.

Brass is an alloy made from zinc and copper.

Pure gold is too soft for many things so most gold is combined with other metals to make it stronger. ...

World time periods are often listed by the metal used.

Two rocks with different masses fall side by side, pulled downward by gravity. Why are they able to experience the same motion?(1 point)

The rock with more mass will also have more force pulling it down. Even though the accelerations are different, the rocks will have the same speed.
The rock with more mass will also have more force pulling it down. Even though the accelerations are different, the rocks will have the same speed.

The rock with more mass will also have more force pulling it down, so the accelerations can be the same.
The rock with more mass will also have more force pulling it down, so the accelerations can be the same.

Gravity will pull the rocks down equally, so the accelerations can be the same.
Gravity will pull the rocks down equally, so the accelerations can be the same.

Gravity will pull the rocks down equally. Even though the accelerations are different, the rocks will have the same speed.

Answers

Answer:

The rock with more mass will also have more force pulling it down, so the accelerations can be the same.

Explanation:

2 examples of non fossil fuels ?

Answers

Answer:

-> Hydropower

-> Solar power

Explanation:

-> Hydropower

[] The power of water! It is the use of falling or fast-running water to produce electricity for power. Impoundments or da*ms are mainly used in this type of power source.

-> Solar power

[] The power of the sun! It is the use of sunlight, or solar energy, to produce electricity for power. You have probably heard of solar panels, and this is the main way to collect it.

Have a nice day!

     I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)

- Heather

Answer:

Wind energy and solar power

Explanation:

they do not use fossil fuels

Answer This!!!!!!
I'll give brainliest to whoever gets it right.

Answers

Answer:

Explanation:

 Gamma can occur at any step in the decay as the remaining protons and neutrons rearrange themselves into their new identity.

During what time period does the balloon drift in a counterclockwise direction?

Answers

Yeh it’s 9am to 10 pm

Which of the following is the equation for acceleration?

Answers

Answer:

A

Explanation:

acceleration = velocity / time

Hope that helps

Answer:

D

Explanation:

Average acceleration = final velocity- initial velocity, divided by elapsed time.

ā = V - Vo/t

= change in velocity ÷ change in time

Explain why the temperature is not changing at X

Answers

Answer:

The temperature is constant at 'X'. No increase or decrease. Would be same answer if there were a 'X' at temperature 'D'.

Slope of graph is zero so no change in the temperature.

What is temperature?

Temperature is a physical quantity that expresses quantitatively the perceptions of hotness and coldness. Temperature is measured with a thermometer.

Given graph of temperature and time, at position x there in no change in temperature with time so temperature is not changing.

Slope of graph is zero so no change in the temperature.

To learn more about temperature refer to the link:

brainly.com/question/11464844

#SPJ2

Which one of the following statements concerning a collection of gas molecules at a certain temperature is true?A. The lower the temperature, the greater are the molecular speeds. B. Most of the molecules have the same kinetic energy. C. All molecules possess the same momentum. D. The molecules have a range of kinetic energies. E. All molecules move with the same velocity.

Answers

Answer:

D  Is true - the velocities (and squared) follow the appropriate statistical curve

The molecules have a range of kinetic energies at a certain temperature.  As the temperature increases, their kinetic energy and molecular speed increases.

What is kinetic theory of gases ?

Kinetic theory of gases describes the nature of ideal gases and their volume, pressure and kinetic energy. As per this theory the gases are made of tiny particles which have negligible mass compared to that of the container.

Kinetic theory states that the kinetic energy of all gases increases with increase in temperature which is independent of the masses and and at certain temperature all the gases are having same range of kinetic energies.

The velocity of all the gaseous particles increases with increasing in temperature which results in the increase in kinetic energy. Hence, option D is correct.

Find more on kinetic theory:

https://brainly.com/question/15357425

#SPJ6

The planar simple harmonic wave travels in the positive direction of x axis with wave velocity u=2m/s, and the vibration curve of the particle at the origin in cosinusoidal form is shown in the figure.
Try to find (1) the vibration function of the particle at the origin, (2) the wave function of the planar simple harmonic wave according to the origin.

Answers

The planar simple harmonic wave travels in the positive direction of x axis with wave velocity u=2m/s, and the vibration curve of the particle at the origin in cosinusoidal form is shown in the figure.

Try to find (1) the vibration function of the particle at the origin, (2) the wave function of the planar simple harmonic wave according to the origin.

Answer:

Figure 16.8 The pulse at time

t

=

0

is centered on

x

=

0

with amplitude A. The pulse moves as a pattern with a constant shape, with a constant maximum value A. The velocity is constant and the pulse moves a distance

Δ

x

=

v

Δ

t

in a time

Δ

t

.

The distance traveled is measured with any convenient point on the pulse. In this figure, the crest is used.

Please respect! Can you answer this for me?

Answers

Answer:

ıf u find the answer can u comment me to notification thank u

Explanation:

Can someone help label these?

Answers

A. reactants
B. subscript
C. coefficient
D. products

13) A mass attached to the free end of a spring executes simple harmonic motion according to the equation y = (0.50 m) sin (18π t) where y is in meters and t is seconds. What is the period of vibration?

Answers

Hi there!

The period is given by:

[tex]T = \frac{2\pi}{w}[/tex]

T = Period (sec)

w = angular frequency (rad/sec)

According to the equation for SHM in terms of position:

y(t) = Asin(ωt + φ)

A = Amplitude (m)

ω = angular frequency (rad/sec)

t = time (sec)

φ = phase angle

In this instance, the angular frequency is given as 18π.

Plug this value into the equation for T:

[tex]T= \frac{2\pi}{18\pi} = \frac{1}{9} = \boxed{0.111 s}[/tex]

Help with a b and c.

Answers

Answer:

Explanation:

Edit to add part a

a)  Heating a gas causes the atoms to increase their kinetic energy. With only atmospheric pressure to contain it, the gas will decrease in density by pushing colder gas out of the way. The lid is then sealed to the jar and allowed to cool. The cooling gas, now constrained by the volume of the jar will be forced to lower its pressure to maintain equilibrium. The lower pressure inside the jar will allow the atmospheric pressure outside the jar to "click" the lid indicating a proper seal.

b Before opening there is a much lower pressure inside the jar than outside. The outside pressure keeps the lid constantly in the "clicked" position.

c After the jar is opened, the pressure on either side of the lid is equal and an unbalanced force applied to one side of the lid or the other can cause the lid to "click" or "unclick" depending on the initial position.

1) Answer: Typically when stuff food is sealed in jars, it is sealed while hot. When the jar cools, and the air above the stuff cools, the pressure of the air decreases. ... When the pressure is more than the bottle can hold, it will explode.


2) answer: The button is there to indicate that the jar has remained sealed. If it's down, the vacuum created during the processing has been maintained, and no air has leaked in. If it's up, and you didn't open it, there's no telling what could be growing in there. , food nerd extraordinaire.

3) answer: Those safety buttons are a raised area on the lid. These jars have been sealed under pressure, and when opened, the pressure is released, causing the raised area to raise or lift. This is the same as when foods are canned at home.

Hello! Hope this helps you pass, merry Christmas!

3. A 1500 kg car moving at 30 m/s strikes a 6000 kg van initially at rest. If the car
comes to a complete stop after the collision, what is the final velocity of the van?

Answers

Answer:

7.5m/s

Explanation:

Force= mass × velocity

Energy is conserved, the car and van should have the same overall force.

1500kg × 30m/s= 6000kg × final velocity

Final velocity = 7.5m/s

yayy here you are f, r, e, e, p, o, i, n, t, s

Answers

Answer:

Albert Einstein Albert Einstein was a German-born theoretical physicist, widely acknowledged to be one of the greatest physicists of all time. Einstein is best known for developing the theory of relativity, but he also made important contributions to the development of the theory of quantum mechanics.

Explanation:

Thank you so much buddy !!
Other Questions
Help fast pleaseeeeeeee Jenson Co. just paid a $10.18 dividend. The company's dividends are expected to grow at a consistent rate of 6% indefinitely. Given a required rate of return of 12%, what should be the price of Jenson's stock Auto technicians working at a shop in a rural residential area noticed that the depth of tire treads was smaller among cars that have more miles on the odometer.What are the explanatory variable and response variable for this relationship?Explanatory variable: type of residential areaResponse variable: depth of tire treadExplanatory variable: depth of tire treadResponse variable: miles on the car odometerExplanatory variable: miles on the car odometerResponse variable: depth of tire treadExplanatory variable: type of residential areaResponse variable: miles on the car odometerI think its, (B):Explanatory variable: depth of tire treadResponse variable: miles on the car odometer Please help me ASAP??!!!! Richard needs to copy information from another slide presentation that uses a different design template. To ensure that the information he is copying looks right, which option should he choose?Use Destination themePictureKeep text onlyInsert same The times to pop a 3.4-ounce bag of microwave popcorn without burning it are Normally distributed with a meantime of 140 seconds and a standard deviation of 20 seconds. A random sample of four bags is selected and themean time to pop the bags is recorded. Which of the following describes the sampling distribution of all possiblesamples of size four? what is the meaning for bellwether When naming organic compounds, there are strict rules regarding punctuation. 1. A comma is used to separate two numbers. 2. A hyphen is used to separate a number from a letter. Rewrite the name of this compound using hyphens and commas as appropriate. Solve x/4 > 2 Question 10 options: x 8 x < 8 x > 8 x 8 The calculation of the mean of a population and the expected value of the probability mass function of a Random Variable (RV) are quite similar. Consider a probability mass function that contains 4 unique Random Variables: 100, 200, 300, 400. If the expected value of the RV can be calculated by simply taking the average of the RVs, what can be said about the corresponding probabilities of each of the 4 RVs find the shaded area... Lainey is looking for a new apartment and her realtor keeps calling her with new listings. The calls only take a few minutes, but a few minutes here and there are really starting to add up. She's having trouble concentrating on her work. What should Lainey do? a) Tell her realtor she can only receive text messages O b) Limit the time spent on each call O c) Turn off her phone until she is on a break O di Call her realtor back when customers won't see her on the phone Suppose that the probability that a person will develop hypertension over a life time is 60%. Of 13 graduating students from the same college are selected at random. find the mean number of the students who develop hypertension over a life time What is heroism ?.mmm. 6. How much larger is 2 x 104 than 8 x 102? A. 15 B. 20 C. 25 D. 30 Two friends are writing practice problems to study for a trigonometry test. Sam writes the following problem for his friend Anna to solve:In right triangle ABC, the measure of angle C is 90 degrees, and the length of side c is 8 inches.Solve the triangle.Anna tells Sam that the triangle cannot be solved. Sam says that she is wrong.Who is right? Explain your thinking If the price level is above the equilibrium price level, how does the aggregate quantity of goods and services demanded compare to the aggregate quantity of goods and services supplied at the price level? First gets most Brainly!Add and simplify2xX +x + 1e3 xx+1ox(+3)X + 104x +1X + 12X + 1 Mordica Companys standard labor cost per unit of output is $22.00 (2.00 hours x $11.00 per hour). During August, the company incurs 2,340 hours of direct labor at an hourly cost of $9.90 per hour in making 1,300 units of finished product. Required:Compute the total, price, and quantity labor variances. Suppose that shoe sizes of American women have a bell-shaped distribution with a mean of 8.438.43 and a standard deviation of 1.51.5. Using the empirical rule, what percentage of American women have shoe sizes that are between 6.936.93 and 9.939.93