Answer:
Kinetic to potential energy.
Explanation:
A rock sinks through water at a constant speed is a type of kinetic to potential energy conversion. The rock movement refers to kinetic energy whereas sinking in the water represents potential energy due to movement from top to bottom in the water. So we can say that the kinetic to potential energy conversion is occurring in this example.
Need help to get this question right!!
Answer:
16 times as strong
Explanation:
From the question given above, the following assumptions were made:
Initial Force (F₁) = F
Initial distance apart (r₁) = r
Final distance apart (r₂) = ¼r
Final force (F₂) =?
Next, we shall obtain a relationship between the force and the distance apart. This can be obtained as follow:
F = GM₁M₂ / r²
Cross multiply
Fr² = GM₁M₂
If G, M₁ and M₂ are kept constant, then,
F₁r₁² = F₂r₂²
Finally, we determine the new force as follow:
Initial Force (F₁) = F
Initial distance apart (r₁) = r
Final distance apart (r₂) = ¼r
Final force (F₂) =?
Fr² = F₂ × (¼r)²
Fr² = F₂ × r²/16
Fr² = F₂r² / 16
Cross multiply
16Fr² = F₂r²
Divide both side by r²
F₂ = 16Fr² / r²
F₂ = 16F
From the calculations made above, we can see that the new force is 16 times the original force.
Thus, the new force is 16 times stronger.
Two resistors, A and B, are connected in parallel across of a 6V battery. The current through B is found to be 2.0 A. When the two resistors are connected in series to the 6V battery, a voltmeter connected across the resistor A measures a voltage of 4V. Find the resistances of A and B.
Answer:
Resistance of A is [tex]6\ \Omega[/tex] and B is [tex]3\ \Omega[/tex]
Explanation:
The voltage across both the resistances will be the same as they are connected in parallel.
V = Voltage = 6 V
[tex]I_B=2\ \text{A}[/tex]
Resistance is given by
[tex]R_B=\dfrac{V}{I_B}\\\Rightarrow R_B=\dfrac{6}{2}\\\Rightarrow R_B=3\ \Omega[/tex]
[tex]V_B=V_b-V_A\\\Rightarrow V_B=6-4\\\Rightarrow V_B=2\ \text{V}[/tex]
Series connection
[tex]V_A=4\ \text{V}[/tex]
The current is constant in series connection
[tex]I=\dfrac{V_B}{R_B}\\\Rightarrow I=\dfrac{2}{3}\ \text{A}[/tex]
[tex]R_A=\dfrac{V_A}{I}\\\Rightarrow R_A=\dfrac{4}{\dfrac{2}{3}}\\\Rightarrow R_A=6\ \Omega[/tex]
The resistance of A is [tex]6\ \Omega[/tex] and B is [tex]3\ \Omega[/tex].
what is phyical quantity
Answer:
physical quantity
Explanation:
All quantity in term of which laws of physics are described and can be measured is called physical quantity
all 4 questions plz ( pls hurry)
A small steel ball falls from rest through a distance of 3m. When calculating the time of fall, air resistance can be ignored because
Answer:
First, let's write the movement equations for this ball.
The only force acting on the ball will be the gravitational acceleration (because we ignore the air resistance) then the acceleration equation is:
a(t) = -9.8m/s^2
Where the minus sign is because the ball is falling down.
To get the velocity of the ball, we need to integrate over time to get:
v(t) = -(9.8m/s^2)*t + v0
Where v0 is the initial velocity of the ball. Because it falls from rest, we can conclude that the initial velocity is 0 m/s, then the velocity equation is:
v(t) = -(9.8m/s^2)*t
For the position equation we need to integrate again, here we get:
p(t) = -(1/2)*(9.8m/s^2)*t^2 + p0
Where p0 is the initial position. In this cse we know that the ball falls from a height of 3m, then po = 3m
The position equation is:
p(t) = -(1/2)*(9.8m/s^2)*t^2 + 3m
The ball will hit the ground when p(t) = 0m, then we need to solve the equation:
p(t) = -(1/2)*(9.8m/s^2)*t^2 + 3m = 0m
for t.
-(1/2)*(9.8m/s^2)*t^2 + 3m = 0m
3m = (1/2)*(9.8m/s^2)*t^2
3m*2 = (9.8m/s^2)*t^2
6m/(9.8m/s^2) = t^2
√(6m/(9.8m/s^2)) = t = 0.78s
The ball needs 0.78 seconds to hit the ground.
The correct answer is (d) the weight of steel ball is much larger than air resistance.
since the density of steel ball is quite higher than that of air. The weight of even a small steel ball will be much larger than the air resistance acting opposite to the motion of the steel ball. Hence in the case of a freely falling steel ball the air resistance can be neglected.
Learn more about air resistance:
https://brainly.com/question/2575108
A 0.877-kg ball has an elastic, head-on collision with a second ball that is initially at rest. The second ball moves off with half the original speed of the first ball. (a) What is the mass of the second ball
Answer: the mass of the second ball is 2.631 kg
Explanation:
Given that;
m1 = 0.877 kg
Initial velocity = V0
Initial momentum = m1 × V0
final velocity of m1 is u1, final velocity of m2 is u2 = v0/2
now final momentum = m1 × u1 + m2 × u2
using momentum conservation;
m1×V0 = m1×u1 + m2×v0/2
m1×(v0 - u1) = m2×V0/2 ----- let this be equation 1
Now, for elastic collision;
m1×v0²/2 = m1×u1²/2 + m2×(v0/2)²/2
m1×(v0² - u1²) = m2×(v0/2)² --------- let this be equation 2
now; equation 2 / equation 1
: V0 + u1 = v0/2
2V0 + 2u1 = V0
2u1 = V0 - 2V0
u1 = -V0/2
now we insert in equ 1
m1×3V0/2= m2×V0/2
m1 × 3 = m2
m2 = 0.877 × 3
m2 = 2.631 kg
Therefore, the mass of the second ball is 2.631 kg
The 1360-kg car and the 2100-kg tow truck are stationary. The muddy surface on which the car s tires rest exerts negligible friction forces on them. What is the tension in the tow cable
Answer:
5.91 kN
Explanation:
The schematic view of the free body diagram of the car is shown in the image attached below.
Let's first calculate the weight of the car.
W = mg
W = 1360 × 9.81
W = 13341.6 N
W = 13.3416 kN
From the image, Using the equilibrium equations, we have:
[tex]\sum F_x = 0\\[/tex]
T cos (18° - 10°) - 13.3416 sin 26° = 0
T cos 8° - 5.84857 = 0
T cos 8° = 5.84857
[tex]T = \dfrac{5.84857}{cos \ 8^0}[/tex]
[tex]T = \dfrac{5.84857}{0.9903}[/tex]
T = 5.905856811 N
T ≅ 5.91 kN
what does correlation mean
a mutual relationship or connection between two or more things.
A fireworks mortar is launched straight upward from a pool deck platform 4 m off the ground at an initial velocity of 61 m/sec. The height of the mortar can be modeled by where h(t) is the height in meters and t is the time in seconds after launch. What is the maximum height
Answer:
22.48m
Explanation:
Given that the pool deck platform is 4 m above the ground.
The initial velocity of mortar in the upward direction, u=21 m/s
At the maximum height, the velocity of the mortar will become zero.
So, the final velocity, v=0
Acceleration due to gravity, g = 9.81 m/[tex]s^2[/tex] in the downward direction.
By using the equation of motion [tex]v^2=u^2+2as\\[/tex]
On putting all the values, we have
[tex]0^2=21^2+2(-9.81)s\\\\s=21^2/(2\times 9.81)[/tex]
s= 22.48 m
Hence, the mortar will reach a maximum height of 22.48m.
(1 point) Unknown resistor in voltage divider Suppose that a power supply is connected across two resistors R1 and R2 that are connected in series. The power supply voltage E, the voltage across the second resistor V2, and the first resistance R1 are all known, but R2 is not known. Find an expression for R2 in terms of E,R1,andV2
Answer:
R₂ = V₂R₁/(E + V₂)
Explanation:
By voltage divider, V₂ = ER₂/(R₁ + R₂)
So, cross-multiplying, we have
V₂(R₁ + R₂) = ER₂
expanding the bracket, we have
V₂R₁ + V₂R₂ = ER₂
collecting like terms, we have
V₂R₁ = ER₂ + V₂R₂
factorizing, we have
V₂R₁ = (E + V₂)R₂
dividing through by (E + V₂), we have
R₂ = V₂R₁/(E + V₂)
A weight lifter lifts a 360-N set of weights from ground level to a position over his head, a vertical distance of 1.95 m. How much work does the weight lifter do, assuming he moves the weights at constant speed
Answer:
W= 702 J
Explanation:
Given that,
A weight lifter lifts a 360-N set of weights from ground level to a position over his head, a vertical distance of 1.95 m.
We need to find the work the weight lifter do. Work done by an object is given by the formula as follows :
W = Fd
Putting all the values,
W = 360 N × 1.95 m
= 702 J
So, the required work done is 702 J.
Objects 1 and 2 attract each other with a gravitational force
of 18.0 units. If the mass of Object 1 is halved AND the
mass of object 2 is tripled, then the new gravitational force
will be units.
Answer:
the answer is 72.0 units:) thank me later!!!!!!!
Which layer of the atmosphere is most likely to protect life on Earth from ultraviolet radiation
Answer:
ozone layer
Explanation:
The ozone layer forms a thin shield in the upper atmosphere protecting life on earth from UV rays. Ozone is a naturally occurring gas that is found in two layers of the atmosphere
A 25 kg box on a horizontal frictionless surface is moving to the right at a speed of 5.0 m s. The box hits and remains attached to one end of a spring of negligible mass whose other end is attached to a wall. As a result, the spring compresses a maximum distance of 0.60 m. (a) i. The spring does work on the box from the moment the box first hits the spring to the moment the spring first reaches its maximum compression. Indicate whether the work done by the spring is positive, negative, or zero.
Answer:
Explanation:
Work done by the spring is negative .
Work done by force F creating displacement d is given by the following expression .
Work = F x d
Both force and displacement are vector quantity .
When direction of force and direction of displacement is same , work is positive . When direction of force and direction of displacement is opposite , work is negative .
When spring is compressed , it exerts a restoring or opposing force in a direction opposite to the direction of displacement of box . Hence here force is opposite to displacement . Restoring force acts opposite to displacement . Hence work done by spring on box is negative .
Explain why gravity is the only force acting on a falling ball
Answer:
Gravity is the only force acting on a falling ball because of free fall. Since gravity is unbalanced it accelerates an object and the velocity increases as an object falls due to gravity pushing it. The acceleration due to gravity is 9.8 m/s^2.
A person weighing 785 Newtons on the surface of the Earth would weigh 47 Newtons on the surface of Pluto. What is the magnitude of the gravitational acceleration on the surface of Pluto?
Answer:
3.72 N / kg .
Explanation:
The weight of the object can be calculated using the expression below
Weight = mg
Weight= 785 Newtons
M = mass
g= acceleration due to gravity on Earth is 9.8 m/s² .
So, substitute the values we have,
So on Earth . . .
785 N = m x 9.8
mass= 785/9.8
=80.1kg
We can calculate when on On Mars, as
Weight= mg
298N= 80.1 kg x g( on Mars)
Acceleration of gravity of that Mars =
298 N/ 80.1
= 3.72 N / kg .
Hence, the magnitude of the gravitational acceleration on the surface of Pluto is 3.72 N / kg .
I need help this question
Answer:
[tex]93\:\mathrm{kg}[/tex]
Explanation:
We can use Newton's Universal Law of Gravitation to solve this:
[tex]F=G\frac{m_1m_2}{r^2}[/tex], where [tex]F[/tex] is force, [tex]G[/tex] is gravitational constant [tex]6.67\cdot 10^{-11}[/tex], [tex]m_1[/tex]and [tex]m_2[/tex] represent the masses of both objects, and [tex]r[/tex] represents the distance between their center of masses.
Plugging in our given values, we have:
[tex]5.2\cdot 10^{-8}=6.67\cdot 10^{-11}\cdot \frac{97\cdot m_2}{3.4^2},\\m_2=92.9=\fbox{$93\:\mathrm{kg}$}[/tex](two significant figures).
Answer:
the answer is 93kg
Explanation:
the answer is 93kg
1. The Age of the Dinosaurs
Dinosaurs existed about 250 million years ago to 65 million years ago. This era is broken up into three periods known as the Triassic, Jurassic and Cretaceous periods. The Triassic Period lasted for 35 million years from 250-205 million years ago. Planet Earth was a very different place back then. All the continents were united to form one huge land mass known as Pangaea. The Jurassic Period was the second phase. The continents began shifting apart. The time scale for this famous period is from 205 to 138 million years ago. The Cretaceous Period was the last period of the dinosaurs. It spanned a time from 138 million to about 65 million years ago. In this period the continents fully separated. However, Australia and Antarctica were still united.
What type of text structure is this?
Please explain why your answer is correct:
In which situation is maximum work considered to be done by a force?
A.
The angle between the force and displacement is 180°.
B.
The angle between the force and displacement is 90°.
C.
The angle between the force and displacement is 60°.
D.
The angle between the force and displacement is 45°.
E.
The angle between the force and displacement is 0°.
Answer:
A) When the angle between the Force (F) and Displacement (x) is 0°, because, Work done (W) is directly proportional to the Cosine of the Angle between the Force applied and the resultant displacement of the subject.
W = F•x cos ∅
If ∅ = 0°,
W = F•x ===> Maximum Work Done.
If ∅ = 45°,
W = F•x/√2
If ∅ = 90°,
W = 0
If ∅ = 180°,
W = –F•x ===> Minimum Work Done.
An ocean wave traveling in one direction has a wavelength of 1.0 m and a frequency of 1.25 Hz. Take the direction of wave propagation lo be the positive x direction.
(a) What is the speed (in m/s) of this ocean wave?
(b) Assuming that this wave is harmonic, and its amplitude is 2.0 m, what equation would describe its motion? Let the displacement at t = 0 s and x = 0 m be a maximum.
(c) What will be the height of the wave 3.0 m from the origin at t = 10 s?
Answer:
a) [tex]v=1*1.25=1.25\: m/s[/tex]
b) [tex]y(x,t)=2sin(2\pi( x-1.25 t)[/tex]
c) [tex]y(3,10)=1.73 m[/tex]
Explanation:
a) The speed of a wave is given by the following equation:
[tex]v=\lambda f[/tex]
Where:
λ is the wavelength
f is the frequency
[tex]v=1*1.25=1.25\: m/s[/tex]
b) The harmonic wave has the following equation:
[tex]y=Asin(kx-\omega t)[/tex]
A is the amplitude (2 m)
k is the wavenumber (2π/λ)
ω is the angular frequency (2πf)
[tex]y(x,t)=2sin(2\pi x-2\pi*1.25 t)[/tex]
[tex]y(x,t)=2sin(2\pi( x-1.25 t)[/tex]
c) Here we need to find the heigth at x=3 m and t =10 s, so we need to find y(3,10).
[tex]y(3,10)=2sin(2\pi(3-1.25*10)[/tex]
[tex]y(3,10)=2sin(2\pi(3-1.25*10)[/tex]
[tex]y(3,10)=1.73 m[/tex]
I hope it helps you!
A 2.00 kg block on a horizontal floor is attached to a horizontal spring that is initially compressed 0.0300 m . The spring has force constant 815 N/m . The coefficient of kinetic friction between the floor and the block is μk=0.40. The block and spring are released from rest and the block slides along the floor.
Required:
What is the speed of the block when it has moved a distance of 0.0200 m from its initial position? (At this point the spring is compressed 0.0100 m.)
Answer:
v = 0.41 m/s
Explanation:
In this case, the change in the mechanical energy, is equal to the work done by the fricition force on the block.At any point, the total mechanical energy is the sum of the kinetic energy plus the elastic potential energy.So, we can write the following general equation, taking the initial and final values of the energies:[tex]\Delta K + \Delta U = W_{ffr} (1)[/tex]
Since the block and spring start at rest, the change in the kinetic energy is just the final kinetic energy value, Kf.⇒ Kf = 1/2*m*vf² (2)The change in the potential energy, can be written as follows:[tex]\Delta U = U_{f} - U_{o} = \frac{1}{2} * k * (x_{f} ^{2} - x_{0} ^{2} ) (3)[/tex]
where k = force constant = 815 N/m
xf = final displacement of the block = 0.01 m (taking as x=0 the position
for the spring at equilibrium)
x₀ = initial displacement of the block = 0.03 m
Regarding the work done by the force of friction, it can be written as follows:[tex]W_{ffr} = - \mu_{k}* F_{n} * \Delta x (4)[/tex]
where μk = coefficient of kinettic friction, Fn = normal force, and Δx =
horizontal displacement.
Since the surface is horizontal, and no acceleration is present in the vertical direction, the normal force must be equal and opposite to the force due to gravity, Fg:Fn = Fg= m*g (5)Replacing (5) in (4), and (3) and (4) in (1), and rearranging, we get:[tex]\frac{1}{2} * m* v^{2} = W_{ffr} - \Delta U = W_{ffr} - (U_{f} -U_{o}) (6)[/tex]
[tex]\frac{1}{2} * m* v^{2} = (- \mu_{k}* m*g* \Delta x) -\frac{1}{2} * k * (x_{f} ^{2} - x_{0} ^{2} ) (7)[/tex]
Replacing by the values of m, k, g, xf and x₀, in (7) and solving for v, we finally get:[tex]\frac{1}{2} * 2.00 kg* v^{2} = (-0.4*2.00 kg*9.8m/s2*0.02m) +( (\frac{1}{2} *815 N/m)* (0.03m)^{2} - (0.01m)^{2}) = -0.1568 J + 0.326 J (8)[/tex]
[tex]v =\sqrt{(0.326-0.1568} = 0.41 m/s (9)[/tex]Which of the following is NOT true about essential body fat? A. The human body would not function normally without essential body fat. B. Essential body fat accounts for about 3% of men's total weight. C. The percentage of essential body fat is the same for both males and females. D. Essential body fat is found in one's organs, bones, and muscles. Please select the best answer from the choices provided. A B C D Mark this and return
Answer:
I believe it is A. The human body would not function normally without essential body fat.
Explanation:
Answer:
Cccccccccccc
Explanation:
a student attaches a 0.5 kg object to a 0.7 m string and rotates the object around her head and parallel to the ground. how much tension force is required to make the object rotate with a speed of 12 m/s?
The object would have a centripetal acceleration a of
a = (12 m/s)² / (0.7 m) ≈ 205.714 m/s²
so that the required tension in the string would be
T = (0.5 kg) a ≈ 102.857 N ≈ 100 N
(rounding to 1 significant digit)
a plane flies from Addis Ababa to Gamble is 400km. in 2 hrs, then straight back to Gamma is 200km. in 1hrs what is the average speed, average velocity, total distance and total displacement
Answer:
a) Average speed = 200 Km/hr
b) Average velocity = 0 m/s
c) Total distance = 800 Km
d) Total displacement = 0 Km
Explanation:
a) Let the speed of the plane from Addis Ababa to Gamble be represented by [tex]S_{1}[/tex], and from Gamble to Addis Ababa by [tex]S_{2}[/tex].
Average speed = [tex]\frac{S_{1} + S_{2} }{2}[/tex]
[tex]S_{1}[/tex] = [tex]\frac{distance}{time}[/tex] = [tex]\frac{400}{2}[/tex]
= 200 Km/hr
[tex]S_{2}[/tex] = [tex]\frac{distance}{time}[/tex] = [tex]\frac{200}{1}[/tex]
= 200 Km/hr
Average speed = [tex]\frac{200 + 200}{2}[/tex]
= 200 Km/hr
b) Velocity = [tex]\frac{displacement}{time}[/tex]
Average velocity = [tex]\frac{total displacement}{total time taken}[/tex]
Since the plane flies from Addis Ababa to Gamble, then back to Addis Ababa, its total displacement is zero.
So that,
Average velocity = 0 m/s
c) Total distance = 400 Km + 400 Km
= 800 Km
d) Total displacement = 400 Km + (-400 Km)
= 0 Km
Estimate the weight of a 1000kg car that is accelerating at 3 m/s/s.
Answer:
W = 9800 N
Explanation:
Given that,
Mass of a car, m = 1000 kg
Acceleration of the car, a = 3 m/s²
We need to find the weight of the car. Weight of an object is given by the product of mass and acceleration due to gravity on the Earth.
W = mg
Put all the values,
W = 1000 kg × 9.8 m/s²
= 9800 N
So, the weight of the car is 9800 N.
13. The
are beautiful lights in the sky caused from solar energy entering the
atmosphere after moving along the magnetic field of the Earth.
Answer:
Are you talking about aurora borealis?
Explanation:
Assume: The bullet penetrates into the block and stops due to its friction with the block. The compound system of the block plus the bullet rises to a height of 10 cm along a circular arc with a 18 cm radius.
Assume: The entire track is frictionless. A bullet with a m1 = 30 g mass is fired horizontally into a block of wood with m2 =
4.8 kg mass.
The acceleration of gravity is 9.8 m/s^2.
Calculate the total energy of the composite system at any time after the collision. Answer in units of J.
Taking the same parameter values as those in Part 1, determine the initial velocity of the bullet. Answer in units of m/s.
Answer:
1)4.7334J
2)225.4m/s
Explanation:
v= the Velocity of both the bullet and the block after collision=?
H= Height of the bullet along circular arc= 10cm=0.1m
g= acceleration due to gravity= 9.81m/s^2
R= Radius of the circular arc= 18cm= 0.18m
m= Mass of the bullet= 30g= 0.03kg
M= Mass of the block = 4.8 kg
Using the law of conservation of energy
Potential energy of the system= Kinectic energy of the system
1/2 mv^2= mgh..............eqn(1)
But we have two mass m and M
We can write eqn(1) as
0.5(m+M)v^2= (m+M)gh ...........eqn(2)
If we make "v" subject of the formula we have
v = √2gh
Then substitute the values we have
= √2 x 9.81 x 0.1 = 1.40m/s
1) We can now calculate the total energy of the system after collision as
KE = 1/2(m+M)v^2
= 1/2 x (0.03+4.8) x (1.40)^2
KE = 4.7334J
Hence, the total energy of the composite system at any time after the collision is 4.7334J
2)to determine the initial velocity of the bullet.
From law of momentum conservation, which can be expressed as
m1u1+m2u2=(m1+m2)v
Where the initial Velocity of the bullet u1= ?
Final velocity of the bullet = 0
the Velocity of both the bullet and the block after collision=v= 1.40m/s
(0.03×u1) +(u×0)= (4.8+0.03)1.4
0.03u1=6.762
U1=225.4m/s
Hence, the initial velocity of the bullet is 225.4m/s
The total energy of the composite system at any time after the collision is 4.7334 J and initial velocity of the bullet is 225.4 m/s.1`
What is conservation of momentum?
Momentum of a object is the force of speed of it in motion. Momentum of a moving body is the product of mass times velocity.
When the two objects collides, then the initial collision of the two body is equal to the final collision of two bodies by the law of conservation of momentum.
Total energy of the composite system at any time after the collision-
The mass of the bullet is 30g and the mass of the wood block is 4.8 kg. Thus the total mass of these two is,
[tex]m=0.03+4.8\\m=4.83 \rm kg[/tex]
As the compound system of the block plus the bullet rises to a height of 10 cm. Thus, the speed of it is,
[tex]v=\sqrt{2gh}\\v=\sqrt{2\times9.81\times0.1}\\v=1.4\rm m/s[/tex]
Now, the total energy of the composite system at any time after the collision is equal to the kinetic energy. Therefore,
[tex]E=\dfrac{1}{2}mv^2\\E=\dfrac{1}{2}4.83(1.4)^2\\E=4.7334\rm J[/tex]
Total energy of the composite system at any time after the collision is 4.7334 J.
The initial velocity of the bullet-The block was at rest initial, thus it has initial velocity of it is zero. Thus, the initial momentum of the bullet is equal to the final momentum of bullet and block. Therefore,
[tex]0.03\times u_o=4.83\times1.4\\u_o=225.4\rm m/s[/tex]
Thus, the total energy of the composite system at any time after the collision is 4.7334 J and initial velocity of the bullet is 225.4 m/s.1`
Learn more about the conservation of momentum here;
https://brainly.com/question/7538238
A dragster going at 15 m/s increases its velocity to 25 m/s in in 2 seconds. What is its acceleration?
Answer:
5m/s²
Explanation:
Given parameters:
Initial velocity = 15m/s
Final velocity = 25m/s
Time taken = 2s
Unknown:
Acceleration = ?
Solution:
Acceleration is the rate of change of velocity with time taken. It is mathematically expressed as;
Acceleration = [tex]\frac{Final velocity - Initial velocity }{Time taken }[/tex]
Acceleration = [tex]\frac{25 - 15}{2}[/tex] = 5m/s²
2 objects have a total momentum of 400kg m/s, they collide. Object A’s mass is5kg & object B’s mass is 11kg. After the collision Object B is moving at 15m/s.What is the velocity of Object A AFTER the collision?
Answer:
Explanation:
We shall apply law of conservation of momentum .
Momentum before collision = momentum after collision .
Momentum before collision = 400 kg m/s
Momentum after collision = 5 x v + 11 x 15
where v is velocity of A after the collision .
5 x v + 11 x 15 = 400
5 v = 400 - 165
5v = 235
v = 47 m /s .
The period of a pendulum is directly proportional to the mass of the bob.
true or false.
Answer:
false
Explanation:
i just took the test <3
The period of a pendulum is not directly proportional to the mass of the bob. The period of pendulum is independent of the mass of the bob. Thus, the given statement is false.
What is the period of pendulum?A simple pendulum is the one which consists of a small metal ball called as the bob or a mass which is suspended from a fixed point by a long piece of thread such that the bob is free to swing back and forth from its mean position under the influence of the gravity.
The time period of a simple pendulum is the time taken by it to complete one oscillation. The formula for the time period or period (T) of a simple pendulum is T = 2π (√L/g), where L is the length of the pendulum thread and g is the acceleration due to gravity.
Learn more about Pendulum here:
https://brainly.com/question/14759840
#SPJ6
