The decay rate of the radioisotope on the previous morning at 10 am is 38.7 million decays per second.
Initial decay rate of the radioisotopeThe initial mass of the radioisotope is calculated as follows;
N = N₀(¹/₂)^t/h
where;
h is half life = 32 hourst is time of day, from 8 am to 10 am previous day = 22 hours24 M/s = N₀(¹/₂)^(22/32)
24 M/s = N₀(0.62)
N₀ = (24 M/s)/(0.62)
N₀ = 38.7 M/s
Thus, the decay rate of the radioisotope on the previous morning at 10 am is 38.7 million decays per second.
Learn more about radioisotope here: https://brainly.com/question/18640165
#SPJ1
Evaluate which factor is most likely to cause the concentration of greenhouse gases in the earth's atmosphere to increase?
A.
decreased number of decomposing plants
B.
decreased number of volcanic eruptions
C.
increased frequency of earthquakes
D.
increased human industrial activities
Answer:
D. increased human industrial activities
The conjugate base of a strong acid will always . . .
be acidic
be basic
be a spectator
Using the rxn below determine the following: What is the limiting reagent, theoretical yield of nitic oxide, and how many grams of excess reagent remain when producing nitric oxide when using 4.65g of ammonia to react with 4.25g of oxygen?
5 mols of O_2 need 4 mol NH_3
As mols of ammonia are less Ammonia is limiting reagentNow
Moles of Ammonia
Given mass/Molar mass4.65/170.3molMoles of NO=0.3mol
Mass of NO
0.3(30)9gSo
Moles of Oxygen
4.25/320.13molRemaining moles
0.3-0.13=0.17Mass
0.17(32)5.44gYield
5.44-4.250.79gWhen electrical ___ betweens protons is greater than strong forces, the nucleus will be unstable.
Answer:
repulsion
Explanation:
Use the word bank below to complete the statement. Not all of the words will be used.
Word Bank:
sum. Enthalpy. Heat. Total.
Temperature. Moles. -ΔH. +ΔH.
Hess’s Law describes how the ____ energy of a reaction consists of the ___ of the energy changes of the individual step reactions.
Answer:
Hess’s Law describes how the __Heat__ energy of a reaction consists of the _Enthalpy__ of the energy changes of the individual step reactions
Explanation:
Hess law is a legendary law which is given by
[tex]\\ \rm\Rrightarrow ∆H_{net}=\sum \delta H_r[/tex]
The fact that water is attracted to itself, a property called:.
What pressure, in atm, is required to reduce 60.0 mL of a gas at standard conditions to
10.0 mL at a temperature of 25.0 °C?
a.
Convert these temperatures to Kelvin:
A. -22 °C
b. 206 °C
C. 50 °C
d. 8 °C
What is a network solid?
a
A. A crystalline solid held together by intermolecular forces
B. A crystalline solid held together by charge attractions
C. A crystalline solid held together by metallic bonds
O D. A crystalline solid held together by covalent bonds
SUBMIT
Network solids are chemical compounds that are bound together by a covalent bond. Thus, option D is accurate.
What are covalent bonds?Covalent bonds are the type of chemical bonds that mutually shares electrons between the atoms of the molecules of the compound.
A covalent crystal of network solids is held together by the covalent bond that can be seen in the structures of diamonds, graphite, silicon dioxide, etc.
Therefore, the network solids are option D. held by the covalent bonds.
Learn more about network solids here:
https://brainly.com/question/14185133
#SPJ1
S + 6 HNO3 → H2SO4 + 6 NO2 + 2 H2O
In the above equation, how many grams of water can be made when 19.5 moles of HNO3 are consumed?
Answer:
117 grams H₂O
Explanation:
To find the amount, you need to (1) convert from moles HNO₃ to moles H₂O (via mole-to-mole ratio from equation) and then (2) convert from moles H₂O to grams (via molar mass from periodic table). The final answer should have 3 sig figs according the the given value (19.5).
S + 6 HNO₃ --> H₂SO₄ + 6 NO₂ + 2 H₂O
Molar Mass (H₂O): 15.999 g/mol + 2(1.008 g/mol)
Molar Mass (H₂O): 18.015 g/mol
19.5 moles HNO₃ 2 moles H₂O 18.015 grams
-------------------------- x ---------------------- x ---------------------- = 117 grams H₂O
6 moles HNO₃ 1 mole H₂O
The weak base ionization
constant (Kb) for HCO3 is
equal to:
Weak bases are alkaline solution that does not get completely dissociated. The dissociation constant will be the ratio of the concentration of the products to the reactants.
What is a weak base ionization constant?The weak base ionization constant is the equilibrium constant that is given as the division of the products of the ionization to the concentration of the reactants.
The reaction for HCO₃ is given as:
HCO₃⁻ + OH⁻ ⇄ CO₃²⁻ + H₂O
The value of Ka for the given reaction will be:
Ka = [CO₃²⁻][H₂O] ÷ [HCO₃⁻ ][OH⁻]
Therefore, the Ka of the weak carbonic acid is given as the ratio of the concentration of the products to the reactants.
Learn more about the weak ionization constant here:
https://brainly.com/question/27200344
#SPJ1
You and your classmates are working to develop a prototype for a new type of drone. The drone needs to fly and will be controlled by a remote control. Which STEM fields would be most important for you to have knowledge of to build this drone?
A) chemistry and botany
B) astronomy and geology
C) medicine and geology
D) physics and computer science
Which organisms are producers?
Choose all correct answers.
tree
grass
monkey
mold
Answer: Tree and Grass are the two correct answers here
Explanation: Producers are photosynthesizing organisms. They are any kind of green plant that make their food by taking sunlight and using the energy to make sugar.
Answer:
Tree, grass
Explanation:
Producers make their own food. Trees and grass can make their own food using sunlight (photosynthesis). Monkey is consumer (eats other things like bananas- made by plants - for survival). Mold (like fungus) eat dead stuff and thus are decomposers (not producers).
An Glu amino acid is found in the core (interior) of a water-soluble FOLDED protein (meaning its happy there). What must happen to the pKa of its side-chain group
Glutamic amino acid is the non-essential amino acid and an excitatory neurotransmitter. When Glu is found in the core then the pKa of the side chain group increases.
What is pKa?pKa is the acid strength or the estimate that shows whether the solution is weak or strong acid. pKa less than zero is a strong acid and portrays the bonding of the proton by the acids.
In the Glu amino acid, the value of the pKa of the side chain functional groups increases as the amino acid is found in the interior of the water-soluble folded protein structure.
Therefore, the pKa of the side-chain increases.
Learn more about amino acids here:
https://brainly.com/question/5303148
#SPJ1
Scientists hypothesize that Earth's first oceans were made of fresh water. How did oceans obtain fresh water?
*
1 point
Water vapor in the early atmosphere cooled and fell to Earth as rain.
Frozen comets that fell to Earth melted as they traveled through the atmosphere.
As soon as icecaps formed, they melted because Earth was still very hot.
Early terrestrial organisms exhaled water vapor, which condensed to form fresh water.
The earth's first oceans would have obtained freshwater as a result of the condensation of water vapor in the atmosphere back then.
How were oceans formed?The freshwater of oceans was hypothesized to have been formed by the condensation of water vapor present in the early atmosphere of the earth.
The water vapor was thought to have emanated from volcanic activities. The condensation was in the form of rain and the resulting puddles merged together to form the oceans.
More on how the oceans were formed can be found here: https://brainly.com/question/14073797
#SPJ1
a.
Convert these temperatures to Kelvin:
A. -22 °C
b. 206 °C
C. 50 °C
d. 8 °C
Like this
-22°C + 273.15 = 251.15K
206°C + 273.15 = 479.15K
50°C + 273.15 = 323.15K
8°C + 273.15 = 281.15K
Name these compounds according to IUPAC.
Functional groups are the specific groups that provide characteristic properties. The compounds are butanoic acid and methyl propanoate.
What are functional groups?Functional groups are the active side atoms and molecules that confer the physical and chemical properties of the compound. In the first compound, the functional group is the carboxylic acid (COOH) and four carbon atoms hence, the compound is butanoic acid.
In the second compound, the functional group is an ester (RCOOR) and contains a methyl group and other three carbon atoms making the compound, methyl propanoate.
Therefore, the compounds are butanoic acid and methyl propanoate.
Learn more about functional groups here:
https://brainly.com/question/17033023
#SPJ1
I need this now for a test
explain why the dust clouds that moved to the east coast of the united states during the 1934 storm were composed mostly of silt and clay particles
instead of sand
Dust clouds that moved to the east coast of the united states were composed mostly of silt and clay particles due to constant ploughing during drought.
What is Drought?This is defined as dry period in the climate due to insufficient rainfall in the area at a given time.
The drought led to the soil being constantly ploughed thereby loosening and changing the soil type which is susceptible to wind erosion.
Read more about Drought here https://brainly.com/question/12686086
#SPJ4
fossil fuel in a sentence
biomass in a snentence
Answer:
Below•
Explanation:
Fossil Fuel: It's a natural gas based on natural materials such as coal.
Biomass: It's the total weight of substance.
[tex] \qquad \qquad...[/tex]
24. Explain why a saturated solution is not necessarily a concentrated solution.
Answer:
A saturated solution may not be a concentrated solution IF the solute is only sparingly or slightly soluble in the solution.
Which of the following is Not a physical change?
A. Grating cheese
B. Melting cheese
C. Fermenting cheese
D. Mixing two cheeses in a bowl
Answer:
c: fermenting of cheese
Answer:
c
Explanation:
1. Why does cabbage juice have different colors at different pH levels?
2. Would the solution be acidic or basic when cabbage juice is pink?
1:Red cabbage contains a water-soluble pigment called anthocyanin that changes color when it is mixed with an acid or a base.
2: Basic
How does the Pauli exclusion principle affect orbital filling? Give an example of a 2p orbital diagram for which Paul Exclusion principle is violated.
Pauli's exclusion principle states that no two subshells of same element have same 4 quantum numbers.
Take example of Berrilim orbital
Electronic configuration is given by 1s²2s²
But the orbital is
[tex]\\ \rm\Rrightarrow \huge{\boxed{\uparrow\downarrow}}\:\:\huge{\boxed{\uparrow\downarrow\mid\:\:\:\:\mid\:\:\:}}[/tex]
The radioisotope that has the longest half-life is the best to use in powering planet and space exploration vehicles because they can travel farther. which radioisotope is the best to use? lithium-5 uranium-240 carbon-14 plutonium-239
The best radioisotope to use in powering planet and space exploration is plutonium-239 since it has the longest half-life of 21400 years.
What is Half-Life of radioactive element?The half-life ofa radioactive element is the time it takes for half the amount of atoms in the element to spontaneously decay.
The half-life of radioactive elements vary.
The half life of the given radioactive elements are as follows:
lithium-5 is 3.038×10^-22 secondsuranium-240 is 14.1 hours carbon-14 is 5700 years plutonium-239 is 21400 yearsTherefore, the best radioisotope to use in powering planet and space exploration is plutonium-239 since it has the longest half-life of 21400 years.
Learn more about Half-Life at: https://brainly.com/question/26689704
#SPJ4
Answer:
D. ) Plutonium-239
Use the information in the tables to determine whether the solution of the salt formed from the given acid base combinations will be acidic, basic, or neutral. hcl naoh: hcl nh4oh: ch3cooh koh:
The table should be included, but that's okay
hcl naoh: salt neutral (both strong)
hcl nh4oh: salt acidic(strong acid+weak base)
ch3cooh koh: salt basic(weak acid+strong base)
HELP QUICKLY PLEASEEE
Answer:
Ionic bonds are when electrons are gained/lost. Hence the valence charges.
A student is studying a sample of neon in a container with a moveable piston (this means the container can change in size). If the sample in the container is initially at a pressure of 768.6 torr when the container has a volume of 93.2 mL, what is the pressure of the gas when the piston is moved so that the volume of the container becomes 140.2 mL?
Answer:
P2=672.1 torr
Explanation:
use the formula P1V1=P2V2, plug in the numbers so your equation should look like this (763.9)x(98.8)=P2(112.3) answer should be P2=672.1 torr
The resultant pressure of the sample of gas is 510.9 torr.
What is the relation between pressure and volume?Relation between the pressure and volume will be represented by the ideal gas equation PV = nRT, and for the given question required equation is:
P₁V₁ = P₂V₂, where
P₁ & V₁ are the pressure and volume of initial sample.
P₂ & V₂ are the pressure and volume of final sample.
On putting values from the question to the equation, we get
P₂ = (768.6)(93.2) / (140.2) = 510.9 torr
Hence resultant pressure is 510.9 torr.
To know more about ideal gas equation, visit the below link:
https://brainly.com/question/15046679
#SPJ1
How many oxygen atoms are in one mole of carbon dioxide
Answer:
abt 2 moles
Explanation:
1 mole of carbon atoms per mole of carbon dioxide = 6.02 x 1023 carbon atoms. 2 mole of oxygen atoms per mole of oxygen atoms = 2 x 6.02 x 1023 oxygen atoms.
in a given homologous series of hydrocarbons, the boiling point generally increases as the size of the molecules increases. the best explanation for this statement is that in larger organic molecules
The boiling point of hydrocarbons generally increases as the size of the molecules increases because more bonds are needs to be broken in larger organic molecules.
What are hydrocarbons?Hydrocarbons are organic compounds which here composed of hydrogen and carbon alone.
Hydrocarbons are grouped into families or homologous series based on a reactive group known as the gincyiial group
The homologous series include
alkanesalkenes alkynesThe boiling point generally increases as the size of the molecules increases because more bonds are needs to be broken in larger organic molecules.
Learn more about hydrocarbons at: https://brainly.com/question/3551546
#SPJ1
12 Describe In your own words, describe the glassblowing process.
Explanation:
To give the glass its final shape and size, it is blown into with a blowpipe, creating a sort of bubble of glass. To carry out this process, the blowpipe holding the glass must be placed on a steel stand. Then, the glass artist has to blow into the blowpipe while rotating it at the same
