Answer:
W = 90 J
Explanation:
Data:
Force (F) = 75 NDistance (d) = 1.2 mWork (W) = ?Use the formula:
W = F * dReplace and solve:
W = 75 N * 1.2 mW = 90 JThe work done was 90 Joules.
Greetings.
which type of star has the least amount of pressure in its atmosphere?
Answer:
red dwarfs
Explanation:
they are very low mass stars, as a result they have relatively low pressures
Please help me with these answers
Answer:
question 1 is centripetal acceleration question 2 is 4
Explanation:
centripetal acceleration basically is acceleration that only changes velocity but not speed, while for question 2, you divide 10 by 2.5
A cannon is fired with an initial horizontal velocity of 20 m/s and initial vertical velocity of 25 m/s. After 3s in the air, the canon hits it’s target. How far away(in meters) was the canon from its target? Answer:_____m
Answer:
60 m
Explanation:
After 3 seconds of travel at 20 m/s, the projectile is 3·20 = 60 meters horizontally from the cannon.
__
The vertical height after 3 seconds is 0.9 m, so the straight-line distance from cannon to target is √(60^2 +0.9^2) ≈ 60.007 meters.
Physic about newton's law
1.
How much work done by Olympic gold medalist power lifter Hydilyn Diaz when she
pushes a car with a force of 900 N at a distance of 250m?
2.
How much work done by a tractor if a large rock is pushed with a force of 5000
N at 2.0 m/s for 20 seconds?
#1
Force=900NDisplacement=250m[tex]\\ \sf\longmapsto Work=Force(Displacement)[/tex]
[tex]\\ \sf\longmapsto Work=900(250)[/tex]
[tex]\\ \sf\longmapsto Work=225000J[/tex]
[tex]\\ \sf\longmapsto Work=225KJ[/tex]
#2
Displacement=2(20)=40mForce=5000N[tex]\\ \sf\longmapsto Work=40(5000)[/tex]
[tex]\\ \sf\longmapsto Work=200000J[/tex]
[tex]\\ \sf\longmapsto Work=200KJ[/tex]
An unknown mass is on a flat frictionless surface and a 2 kg object is attached to it with a string going over pulleyt mounted to the end of the table. Acceleration of the 2 kg object is 1.8 m/s^2. What is the mass of the object?
Answer:
Explanation:
F=ma
F in this case is the gravity acting on the 2kg object. Acceleration of gravity is 9.8 m/s^2. SF=ma, so
F = 2kg*(9.8 m/s^2) = 19.6 N
Now use this force to determine the mass of the object on the table:
F=ma
19.6 N (1N=kg*m/s^2) = m*(1.8 m/s^2)
m = 10.89 kg
If you increase the elasticity of a material, what happens to the speed of a mechanical wave going through it?
Answer:
At the molecular level, materials are held together by bonds, which act like springs for small displacements from the equilibrium spacing between neighboring atoms. Push the atoms close, the bond pushes back to keep them apart. Pull them apart, the bond pulls the atoms closer. For those small displacements, it acts like a spring
The speed of the wave will be related to the stiffness of of those springs - you compress the material - how quickly do all of those little springs rebound and push their neighboring atoms away, sending that wave of compression through the material.
Explanation:
P1= 100 kPa
V1= 5 L
T1= 300 degrees Kelvin
P2=100 kPa
V2= ? L
T2= 350 degrees Kelvin
Explanation:
using Charles law; since the pressure is constant
V1/T1 = V2/T2
5/300 = V2/350
cross multiply
V2 X 300 = 5 X 350
V2 = 1750/300
V2 = 5.833L
A student drops a ball off the top of building and records that the ball takes 2.55s to reach the ground. Determine all unknowns and answer the following questions. Neglect drag.
The unknown variables in the model equation for ball's motion include vertical distance traveled by the ball which is 31.86 m and the final velocity of the ball which is 25 m/s.
The given parameter;
time of motion of the ball, t = 2.55 sThe equations that model the motion of the ball is given as follows;
[tex]h = v_0_y + \frac{1}{2} gt^2[/tex]
[tex]v_f = v_0_y + gt[/tex]
All the unknown variables in the equations include;
[tex]v_0_y[/tex] is the initial vertical velocity of the ball, = 0g is the acceleration due to gravity = 9.8 m/s²h is the vertical distance traveled by the ball = ?[tex]v_f[/tex] is the final velocity of the ball = ?The vertical distance traveled by the ball is calculated as follows;
[tex]h = \frac{1}{2} gt^2\\\\h = 0.5 \times 9.8 \times 2.55^2\\\\h = 31.86 \ m[/tex]
The final velocity of the ball is calculated as follows;
[tex]v_f = 0 + 9.8(2.55)\\\\v_f = 25 \ m/s[/tex]
Thus, the unknown variables in the model equation for ball's motion include vertical distance traveled by the ball which is 31.86 m and the final velocity of the ball which is 25 m/s.
Learn more here:https://brainly.com/question/24018491
Describe how a roller coaster works in terms of using potential energy and kinetic energy:
Answer:
Traditionally, the coaster cars are pulled up the first hill by a chain; as the cars climb, they gain potential energy. Then, when the cars descend this hill, potential energy is again changed to kinetic energy. This conversion between potential and kinetic energy continues throughout the ride.
Explanation: hi how ya doing
hello, may you please help me
Calculate the percentage of water of crystallisation in Na2CO3•10H2O
Answer:
62.9%. The molar mass of sodium carbonate is 106 grams per mole. Each water molecule adds another 18.0 grams per mole.
What experiment determines the upper fixed point of a liquid in a glass thermometer
Explanation:
A flask is half filled with water and heated until the water starts boiling.A thermometer is clamped inside the flask without letting it be in contact with waterThe thermometer is left in the steam such that the bulb is heated by the steam at standard atmospheric pressure.As the bulb is heated, the mercury thread rises up and ehre it remains steady for sometime is marked with a light scratch as the upper fixed point(Add diagram )
the amount of energy available to do work is called:
Answer:
Gibbs, free energy
Explanation:
What is the displacement of the object from 2 seconds to 6 seconds
•4m
•8m
•16m
•24m
Answer:
,24m bolşi
Explanation:
dfgzffdsvh466ggsceaijtgcbnmzxygdcrescdrbniuyrlohahrcwehiim
Answer:
the answer is 16 m
hope this is helpful
An object is moving initially with a velocity of 5.6 m/s. After 3.1 s the object's velocity is -2.7 m/s. What is the object's average acceleration during this time
Answer:
-2.68m/s²
Explanation:
To find acceleration use the formula:
acceleration = change in velocity ÷ time
change in velocity = -2.7 - 5.6 = -8.3m/s (final velocity - initial velocity)time = 3.1sSubstitute in the values:
acceleration = -8.3 ÷ 3.1
acceleration = -2.67741.. ≈ -2.68m/s²
Hope this helps!
What does it mean when an
electromagnetic wave has low energy?
A. it has a long wavelength
B. It has a short wavelength
C.it has a short amplitude
D. It has a high frequency
Answer:
A
Explanation:
Low energy photons (such as radio photons) behave more like waves, while higher energy photons (such as X-rays) behave more like particles.
Please give brainliestAnswer:
B. It has a short amplitude.
:)
what is concentration?
Answer:
The concentration of a chemical substance expresses the amount of a substance present in a mixture.
Another definition is that concentration is the ratio of solute in a solution to either solvent or total solution. Concentration is usually expressed in terms of mass per unit volume.
Answer:
In chemistry, concentration is the abundance of a constituent divided by the total volume of a mixture. Several types of mathematical description can be distinguished: mass concentration, molar concentration, number concentration, and volume concentration.
What is a similarity between chemical change and chemical properties
Answer:
How are physical and chemical changes similar and different? (compare and contrast) (Physical and chemical changes are similar because matter experiences a change in state, Physical changes are different because matter remains the same substance, just in a different state, whereas chemical changes change the matter
5. What must occur for an object to exert a contact force on another object?
Answer:
An object must be touching another.
In order for work to be done, what three things are necessary?
Answer:
force, displacement & cause.
Explanation:
there must be a displacement and the force must cause the displacement.
i hope this helps you ahh
whose geocentric model of the solar system was accepted for 1400 years
Answer:
Plato, Aristotle developed it further and used for 1400 years till Copernicus.
Explanation:
A rainbow is seen in a rainy day. Describe its reason
Answer:
A rainbow requires water droplets to be floating in the air. That's why we see them right after it rains. The Sun must be behind you and the clouds cleared away from the Sun for the rainbow to appears.
A projectile is shot from the edge of a cliff 125 m above the ground level with an initial speed of 105 m/s at an angle of 37 degrees with the horizontal. (a) Determine the vertical velocity final. (it is not - vi, since we are on a cliff 125m up)
A.)80.2 m/s
B.)-80.2 m/s
C.)40.2 m/s
D.)-40. 2 m/s
Answer:
alright we have to find the initial velocity of the projectile which was shot from the edge of a cliff 125m above ground level with the initial speed being equivalent to 105 m/s at an angle of 37 degrees i would assume the answer to be C. hope this helps im a tad rusty at this subject
Explanation:
if you hold a heavy weight over your head, the work you do __________.
Answer:
Is zero.
Explanation:
I legit just had this question on my homework.
An electric fan rotates at 800rev/min.consider a point on the blade a distance of 0.16m from the axis, calculate the velocity of this point and it's centripetal acceleration
Answer:
A rotating fan completes 1200 revolutions every minute. Consider the tip of a blade, at a radius of 0.15 m.
Explanation:
The tangential velocity at the point, 0.16 m from the axis is 13.44 m/s.
We have the following information;
Angular speed of the blade = 800rev/min
Radius of the point under consideration = 0.16m
We have to convert the angular velocity to units of rad/s
Given that;
1 rev/min = 0.105 rad/s
800rev/min = 800rev/min × 0.105 rad/s/1 rev/min
= 84 rad/s
Now;
v = rω
v = Tangential velocity
r = radius
ω = angular velocity
v = 0.16m × 84 rad/s
v = 13.44 m/s
Learn more: https://brainly.com/question/14281129
im confused on number one
Explanation:
v=?, u=0, a=?, S=22m.
Using the formula, S=ut+½at²
22={0×5}+(½.a.5²)
22=½.a.5²
a=44/25 = 1.76m/s².
Therefore, net force = work done = ma = 48×1.76 = 84.48N.
therefore, power = work done/time = 84.48/5 = 16.896W.
hope this helps you.
A plant uses carbon dioxide and water to form food and oxygen. Why is this a chemical change?
Answer:
because when the plant inhales c02 it exhales oxgen
Explanation:
Answer:
The properties of carbon dioxide and oxygen are different.
Explanation:
A chemical change is defined as something that changes the substance of something (such as the creation of water from hydrogen and water), and can be figured out if chemical or physical based on different changes and properties. Your answer will be The properties of carbon dioxide and oxygen are different because these are two different elements (compounds in case of CO2) that combine to form a different substance, thus changing the identity of the substance.
Photosynthesis is a chemical reaction that occurs in plants by using radiant energy from sunlight. In this chemical reaction, carbon dioxide from the atmosphere and water from the soil are combined to produce sugar (glucose) that contains stored chemical energy.
Which of the following is not a property of Newton’s Second Law?
a. The acceleration of the object is directly proportional to
the force acting on the object
b. The acceleration of the object is inversely proportional to
the mass of the object
c. The object moves in the same direction as the force acting
on the object.
d. There is no relationship between acceleration to force or
mass.
Answer:
La aceleración
del objeto
es directamente proporcional a la fuerza que actúa sobre el objeto
Explanation:
A steel projectile is shot horizontally at 54 m/s from the top of a 357 m tower. How far
from the base of the tower does the projectile hit the ground?
Hi there!
We can begin by solving for the time it takes the projectile to reach the ground.
Use the equation:
[tex]t = \sqrt{\frac{2h}{g}}[/tex]
Plug in the given height:
[tex]t = \sqrt{\frac{2(357)}{9.8}} = 8.536 s[/tex]
Use the equation:
d = vt, to solve for the horizontal distance:
d = (54)(8.536) = 460.944 m
If the mass of an object is 100 and Net force is 400, what would be the Acceleration?
And explain.
Answer:
[tex]4m/s^{2}[/tex]
Explanation:
I'm assuming the units for force and mass are Newtons and kilograms, respectively.
Rearranging Newton's first law (F=m*a) to solve for acceleration:
F=m*a
[tex]a=\frac{F}{m}=\frac{400 N}{100 kg}=4m/s^{2}[/tex]
The acceleration is 4 meters per second squared and was found by rearranging Newton's first law in order to solve for acceleration.
a car travels at a uniform speed of 30 km per hour for 30 mins and then at a uniform speed of 60 km per hour for the next 30 minutes calculate the average speed of a car
