Answer:
99.6 kpa (or maybe 124.2 kpa <======see below)
Explanation:
Assuming constant volume: ( I also assumed +30 C initial temp)
P1/T1 = P2/T2
T2 * P1/T1 = P2 (T must be in K )
(35 + 273.15) * 98 /(273.15 + 30) = 99.6 kpa
Just in case this was -30 C to start, the answer would be 124.2 kpa
What clues indicate that a chemical reaction has occurred?
Choose all correct answers.
the formation of a new liquid
a color change
a temperature change
the formation of bubbles
Answer:
its probably all of the above, if not then it should be the formation of a new liquid, and a color change
Explanation:
Water cools from 2oc to -2oc. during this time, what happens to the motion of the molecules?
Answer:
The motion of the molecules remains the same.
What is effect of temperature on solubility?
detail please.
In general, solids become more soluble as the temperature increases. This is why sugar dissolves better in hot water than in cold water. The table shows three examples of the solubility (g of solute per 100 g water) of substances at different temperatures.
that's my answerName these compounds according to IUPAC.
IUPAC is the nomenclature approach used for naming compounds. The compounds are ethane, butane, and butene.
What is IUPAC?IUPAC is the nomenclature method of the organic compounds that are universal and is recommended by the International union so that the names of the same chemical species are constant and ubiquitous all over.
The first compound has a single bond and two carbons hence ethane, the second compound has a single bond and four carbons and hence butane, and the third compound has one double bond and four carbon atoms and hence butene.
Therefore, the compounds are ethane, butane, and butene.
Learn more about IUPAC here:
https://brainly.com/question/14379357
#SPJ1
Name these compounds according to IUPAC.
Answer:
10. Butanoic acid
11. Methylpropanoate
Explanation:
In this case first you need to identify the functional group,secondly identify the longest chain that contains the particular functional group:
10. The functional group for this compound is a carboxylic acid due to the "CHO2" group..we have four carbons which makes the parent chain to be butane.since it's acarboxylic acid we replace the "e" at the end to "oic acid".
11. The functional group is ester "RCOOR".For the ester the longest chain is counted from the part of the carboxylic acid which in this case is a propane,and the part from the alcohol becomes a substituent. With esters you replace the "e" at the end of the parent name to "oate". When you write it down you begin with the substituent in this case "methyl" and the rest follows...
hope it is clear enough
When a chemical cold pack is activated, it becomes cool to the touch. What is happening in terms of energy?.
Answer:
An exothermic reaction is happening, it is absorbing the cold.
What is the mass of 61.9 L of oxygen gas collected at STP?
a 122 g 02
b 2.76 g 02
C 88.4 g 02
d 44.2 g 02
Answer:
D. 44.2 g O₂
General Formulas and Concepts:
Gas Laws
Stoichiometry
Dimensional AnalysisMole RatioExplanation:
Step 1: Define
Identify given.
61.9 L O₂ at STP
Step 2: Convert
We know that the oxygen gas is at STP. Therefore, we can set up and solve for how many moles of O₂ is present:
[tex]\displaystyle 61.9 \ \text{L} \ \text{O}_2 \bigg( \frac{1 \ \text{mol} \ \text{O}_2}{22.4 \ \text{L} \ \text{O}_2} \bigg) = 2.76339 \ \text{mol} \ \text{O}_2[/tex]
Recall the Periodic Table (Refer to attachments). Oxygen's atomic mass is roughly 16.00 grams per mole (g/mol). We can use a mole ratio to convert from moles to grams:
[tex]\displaystyle 2.76339 \ \text{mol} \ \text{O}_2 \bigg( \frac{16.00 \ \text{g} \ \text{O}_2}{1 \ \text{mol} \ \text{O}_2} \bigg) = 44.2143 \ \text{g} \ \text{O}_2[/tex]
Now we deal with sig figs. From the original problem, we are given 3 significant figures. Round your answer to the exact same number of sig figs:
[tex]\displaystyle 44.2143 \ \text{g} \ \text{O} \approx \boxed{ 44.2 \ \text{g} \ \text{O}_2 }[/tex]
∴ our answer is letter choice D.
---
Topic: AP Chemistry
Unit: Stoichiometry
What is the major defining property of gasses?.
Answer:
Gases have no definite shape or volume. They are fluid, allowing particles/molecules to move freely.
The behavior of a gas is that the volume changes directly with temperature. With a constant volume, the pressure will be directly proportional to the amount of gas.
Explanation:
These are some of the properties I can think of
D. Identify the building blocks of the following types of biological molecules: (4 points)i. Protein (2 points)
i. Protein (2 points)
ii. Lipid (2 points)
Building blocks are the small units that make the larger, more complex molecule. The building block of protein is an amino acid and lipids are fatty acids and glycerols.
What are proteins and lipids?Proteins and lipids are the biomolecules that are involved in major reactions in the living system. They are composed of smaller subunits joined together by bonds.
Proteins are molecules made up of amino acids linked by the peptide bonds to form the chain of proteins that plays a crucial role in cell functioning.
Lipids are composed of fatty acids and glycerol linked by the ester bond, essential for the storage of energy and in the composition of the membranes.
Therefore, proteins are composed of amino acids and lipids of fatty acids and glycerol.
Learn more about building blocks here:
https://brainly.com/question/14527570
#SPJ1
WILL GIVE BRAINLIEST What would the products of a double-replacement reaction between LiCl and MgO be? (Remember: In double-replacement reactions, the two cations switch places and the two anions switch places.)
If 30.5 g of 15% potassium nitrate solution are reacted to excess magnesium chloride how many grams of potassium chloride will be form
The solubility of which substance is least affected by the temperature of the water
Answer:
solo esto se responderte
Explanation:
Algunos solutos (por ejemplo, cloruro de sodio (NaCl) en agua) exhiben una solubilidad bastante independiente de la temperatura. Unos pocos, como el sulfato de cerio (III) y el carbonato de litio, se vuelven menos solubles en agua a medida que aumenta la temperatura.
A fish has armored plates that enable it to handle the extreme pressure in the deepest, darkest aquatic ecosystem. Where is this fish adapted to live? a pond the open ocean the neritic zone an estuary.
which of the following is a compound .a)oxygen b) Magnesium c) Carbon dioxide d) Argon
What is the purpose of cross breeding or selective breeding
Chemical labels must contain a product identifier, signal word and a pictogram to represent the hazards. what other information is required on a chemical label?
Answer:
The HCS now requires the following elements on labels of hazardous chemicals: Name, Address and Telephone Number of the chemical manufacturer, importer or other responsible party
Explanation:
I tried, I think this is the correct answer.
how many grams of sodium Phosphate is needed to prepare 5.0 L of a 2.6M solution ?
Molarity is the ratio of the moles and the volume. The mass of 2.6 M sodium phosphate solution is 2131.22 gms.
What is mass?
Mass is the product of the moles and the molar mass of the substance. It is given as,
Mass = Moles × Molar mass
The moles from molar concentration is used to calculate mass as:
Mass = Molarity × volume × molar mass
= 2.6 × 5.0 × 163.94
= 2131.22 gms
Therefore, 2131.22 gms is the mass of sodium phosphate.
Learn more about mass here:
https://brainly.com/question/9829994
#SPJ1
Reduction is a reaction that uses________to change a molecule into something else.
Answer:
chemical reaction
Explanation:
Reduction is the transfer of electrons between species in a chemical reaction where there is a process of gaining electrons or a decrease in the oxidation state by an element. A reduction chemical reaction involves increasing electrons associated with a single atom or a group of atom
Which reactant controls the amount of product formed?.
Answer:
limiting reactant gives ................
Answer:
Limiting Reagent or Limiting Reactant
Explanation:
The limiting reagent of a reaction is the reactant that runs out first. Once it is completely consumed, the reaction stops.The limiting reagent is the only chemical that is used to calculate the theoretical yield. It is used up first. After that, any excess reagent will not be able to produce more products.And to assess which reactant is which, we must usually have quantities of each reagent in a chemical reaction...and of course we should write a stoichiometric equation that is balanced with respect to mass and charge in order to assess the stoichiometric equivalence.
We could examine for instance, the combustion of methane gas, the which MAY have cooked your dinner … its combustion reaction is as shown...
[tex]CH_4(g) + 2O_2(g) rarr CO_2(g) + 2H_2O(g) + Delta[/tex]
And here conditions of COMPLETE combustion pertain; there is DIOXYGEN in excess, AND methane is the limiting reagent. A [tex]10*g[/tex] mass of methane represents a molar quantity of …
[tex](10.0*g)/(16.01*g*mol^-1)=0.623*mol[/tex]
And with respect to dioxygen we thus require...
[tex]0.623*mol*32.00*g*mol^-1=40*g[/tex]
...but this quantity (AND MORE) is available from the atmosphere....and the methane was the limiting reagent....
Please Hurry And Answer This Question! :)
Which Compound can be used to preserve biological specimens?
1/2/3?
Biological specimens are the preserved remains of the biological materials. Compound A. formaldehyde or formalin is used to preserve the specimens. Thus, option A is correct.
What are fluid-preserved specimens?Fluid preserved specimens are the biological material of the organism that are kept at the store to study and analyze over a long time without getting any damage. Formaldehyde along with alcohol is the most common preservative.
Formaldehyde is an organic compound that is colorless and pungent in the smell that preserves the dead remains of the organisms intact. It is antiseptic and germicide in nature that makes them best for the purpose.
Therefore, option A. formaldehyde is used to preserve the specimens.
Learn more about formaldehyde here:
https://brainly.com/question/16977261
#SPJ1
Answer:
so i put a...
Explanation:
Edge doesnt give correct answers on unit tests, but i passed with an 88 :)
Correct me if im wrong!!
Fluorine-21 has a half-life of approximately 5 seconds. what percentage of the original nuclei would remain after 15 seconds
Answer:
1/8th = 12.5%
Explanation:
Three half lives would be 1/2 * 1/2 * 1/2 = 1/8 th of original
The concentration of reactants and products and the rate of reaction were measured during a chemical reaction. After the first 3 seconds, the rate of reaction was 1.8x10^-6 M/s. Which of the following would
explain a lower rate after another 3 seconds?
A) The concentration of reactants increased while the concentration of product decreased
B) The concentration of reactants decreased while the concentration of product increased
C) All concentrations of reactants and products decreased
D) All concentrations of reactants and products increased
Answer: B
Explanation:
What is the molarity of a solution that contains 25 g of hcl in 150 ml of solution? (the molar mass of hcl is 36.46 g/mol.) what should you find first?
Answer: 4.6 M
Explanation:
Converting 25 g of HCl to moles, we get 25/36.46 = 0.68568294020845 moles.
Also, 150 mL = 0.150 L
So, the concentration is:
[tex]\frac{0.68568294020845}{0.150} =\boxed{4.6 \text{ M}}[/tex]
Answer:
Part 1. First, you find the Moles.
Part 2. The correct setup for finding the moles is: 25g HCI x 1mol HCI/36.46g HCI
Part 3. The correct setup to find liters is: 150 mL x 1L/1000mL
Part 4. The molarity of this solution is: 4.6 M HCI
Explanation:
just listen lol
Define pressure and temperature.
Answer:
The pressure of a given amount of gas is directly proportional to the temperature at a given volume. When the temperature of a system goes up, the pressure also goes up, and vice versa. The relationship between pressure and temperature of a gas is stated by the Gay-Lussac's law.
What is the oxidation number of sulfur in na2s2o3 ?.
Answer:
Therefore, the oxidation state of sulphur atoms in Na2S2O3 is −2 and +6.
David runs a 100-m dash while pushing a stroller with a force of 25N. What amount of work does David do on the stroller?
David runs a 100-m dash while pushing a stroller with a force of 25N. The work done by David is 2500 Nm.
What is force?Force is a power that changes the motion of the object.
The displacement is 100 m
The force is 25 N
Work done = force x displacement
25 x 100 = 2500 Nm
Thus, the work done by David is 2500 Nm.
Learn more about force
https://brainly.com/question/13191643
#SPJ1
HELP ME PLEAS FAST.
Which statement describes how heat is transferred by convection?
Question 4 options:
Air molecules touch the warm ground, heating them up
Warm air rises and cool air sinks
Sunlight travels through space
[tex]\qquad\qquad\huge\underline{{\sf Answer}}[/tex]
Convection is a method of heat transfer that causes heat to be transferred from one object to another object with being in actual contact but I same atmosphere.
So, the correct phenomenon that describes how heat is transferred by Convection is :
Statement 2. Warmer air rises and copl air sinks.
In IR spectroscopy, a primary amine will produce two signal(s) above 3300 cm-1, because the amino group ________________________.
A primary amine will produce two signal(s) above 3300 [tex]cm^1[/tex], because the amino group has two possible modes of stretching (symmetric and asymmetric)
What is IR?Infrared radiation (IR), sometimes referred to simply as infrared, is a region of the electromagnetic radiation spectrum where wavelengths range from about 700 nanometers (nm) to 1 millimeter (mm).
The N-H stretches of amines are in the region 3300[tex]cm^1[/tex].
These bands are weaker and sharper than those of the alcohol O-H stretches which appear in the same region.
In primary amines ([tex]RNH_2[/tex]), there two bands in this region, the asymmetrical N-H stretch and the symmetrical N-H stretch.
Hence, In IR spectroscopy a primary amine will produce two signal(s) above 3300 cm-1, because the amino group has two possible modes of stretching (symmetric and asymmetric).
Learn more about the IR here:
https://brainly.com/question/20630644
#SPJ1
The reactions listed below are either chemical reactions or nuclear reactions. which are nuclear reactions? check all that apply. upper h superscript plus, plus upper o upper h superscript minus right arrow upper h subscript 2 upper o. superscript 185 subscript 79 upper a u right arrow superscript 181 subscript 77 upper r d plus superscript 4 subscript 2 upper h e. 4 upper f e plus 3 upper o subscript 2 right arrow 2 upper f e subscript 2 upper o subscript 3. superscript 210 subscript 84 upper p o right arrow superscript 206 subscript 82 upper p b plus superscript 4 subscript 2 upper h e.
The equations that are nuclear reactions are as follows:
superscript 185 subscript 79 upper Au right arrow superscript 181 subscript 77superscript 210 subscript 84 upper Po right arrow superscript 206 subscript 82 upper Pb plus superscript 4 subscript 2 upper He.What is nuclear reaction?A nuclear reaction is a reaction that involves the fission of an atomic nucleus, or the fusion of one or more atomic nuclei and/or subatomic particles in which the number of protons and/or neutrons in a nucleus changes.
The products of a nuclear reaction may contain a different element or a different isotope of the same element.
Therefore, the equations that are nuclear reactions are as follows:
superscript 185 subscript 79 upper Au right arrow superscript 181 subscript 77superscript 210 subscript 84 upper Po right arrow superscript 206 subscript 82 upper Pb plus superscript 4 subscript 2 upper He.Learn more about nuclear reaction at: https://brainly.com/question/19752321
#SPJ4
Answer:
b. Reaction B involves a greater change and a change in element identity.
Explanation:
i got it wrong
When assessing solutions to problems involving our water systems, what needs to be considered
Answer:
Virtually every industry in the world anticipates sweeping systemic transformation over the next decade in their strategic planning, production practices, and business models, according to the Sustainability Survey Poll on Water. The global opinion poll, which released a survey of more than 1,200 sustainability experts in March, concludes that water shortages will shift public perception of the value of water, prompting governments and companies to view clean water not as a commodity to exploit but as a precious resource.Conducted by GlobeScan, an international public and stakeholder opinion research firm, and SustainAbility, a think tank and business strategy consultancy, the poll asked, “What are the technologies or changes in behavior which show the most promise for addressing water shortages over the next 10 years?” The experts’ responses generated 19 consensus solutions.
Explanation:
