Hi there!
Recall that a charge that enters a magnetic field while moving experiences a magnetic force that causes it to enter a state of uniform circular motion.
We know the following (For a point charge):
[tex]F_B = qv B[/tex]
q = Charge (C)
v = velocity (m/s)
B = Magnetic field (T)
Fb= Magnetic force (N)
The equation for centripetal force:
[tex]F_c = \frac{mv^2}{r}[/tex]
m = mass (kg)
v = velocity (m/s)
r = radius (m)
Fc = Centripetal force (N)
Since we are given its period:
[tex]T = \frac{2\pi r}{v}\\\\v = \frac{2\pi r}{T}[/tex]
Plug this expression into the above equations. Since the magnetic force equals the centripetal force, set them equal to each other and simplify.
[tex]q\frac{2\pi r}{T} B = \frac{m}{r}(\frac{2\pi r}{T})^2[/tex]
Cancel out the expression.
[tex]qB = \frac{m}{r} (\frac{2\pi r}{T})[/tex]
Cancel out 'r'.
[tex]qB = \frac{2\pi m}{T}[/tex]
Now, we can simplify as necessary to find a value for 'q' over 'm':
[tex]\frac{q}{m} = \frac{2\pi }{TB} = \frac{2\pi }{(4.79 \times 10^{-6})(0.775)} = \boxed{1692554.464}[/tex]
Thus, the charge is 1.693 ×10⁶ times larger than its mass.
The two basic properties of all matter are ______ and ______.
options for first blank
a. length B. volume
options for second blank
a. density B. mass
Answer:
volume , mass
Explanation:
the 3 basic properties of a matter is volume, mass and shape.
What is the cycle of a breaststroke?
Answer:
Breaststroke can be divided up into 4 distinct phases, which consists of the out sweep, in sweep, breathing phase, and lunge, extension, or recovery phase.
Explanation:
pa follow po
Which statement about the observed results of the double-slit experiment is true?
O Waves that are out of phase constructively interfere to create bright bands.
O Waves that are in phase destructively interfere to create bright bands.
O Waves that are in phase constructively interfere to create bright bands.
O Waves that are out of phase constructively interfere to create bright bands.
Waves that are in phase constructively interfere to create bright bands was observed in the double-slit experiment.
What is Interference?This is defined as the phenomenon which occurs when two waves meet while traveling along the same medium.
A wave when in phase undergoes constructive interference while out of phase undergoes destructive interference which is why option C was chosen as the most appropriate choice.
Read more about Interference here https://brainly.com/question/9655287
If electromagnetic radiation acted like particles in the double-slit experiment, what would be observed? (1 point)
O A series of light and dark bands would appear on the screen.
O Two bright bands would appear on the screen in line with the slits.
O The screen would remain dark because no radiation would reach the screen.
O One bright band would appear in the center of the screen.
If electromagnetic radiation acted like particles in the double-slit experiment, we would observe one bright band would appear in the center of the screen.
Bahavior of particles in double-slit experimentIn a double-slit experiment, single particles, such as photons, pass one at a time through a screen containing two slits.
The photons behave like wave and the constructive interfernce of the waves of these photons will generate a high amplitude wave seen as a bright band in the center of the screen.
Thus, if electromagnetic radiation acted like particles in the double-slit experiment, we would observe one bright band would appear in the center of the screen.
Learn more about double slit experiment here: https://brainly.com/question/4449144
What is the centripetal acceleration of 30 kg child standing 5 meters from the center of a
rotating carousel? The carousel is rotating at a linear velocity of 20 m/s.
Answer:
80m/s2
Explanation:
m=30kg. r = 5meter v = 20m/s2 a= ? centripetal acceleration = v*v/r
20*20/5=80m/s2
centripetal acceleration=80 m/s2
A 3 Hz wave has a wavelength of 0.4 m. Calculate the speed of the wave (in m/s).
The speed of the wave with the given frequency and wavelength is 1.2m/s.
Given the data in the question;
Wavelength of the wave; [tex]\lambda = 0.4m[/tex]Frequency; [tex]f = 3Hz = 3s^{-1}[/tex]Speed of the wave; [tex]v = \ ?[/tex]WavelengthWavelength is the distance over which the shapes of waves are repeated. It is the spatial period of a periodic wave.
It is expressed as;
[tex]\lambda = \frac{v}{f}[/tex]
Where v is velocity/speed and f is frequency.
Now, we can easily get the speed of the wave by substituting our given values into the expression above.
[tex]\lambda = \frac{v}{f} \\\\0.4m = \frac{v}{3s^{-1}}\\ \\v = 0.4m * 3s^{-1}\\\\v = 1.2ms^{-1}\\\\v = 1.2m/s[/tex]
Therefore, the speed of the wave with the given frequency and wavelength is 1.2m/s.
Learn more about Speed, Frequency and Wavelength here: brainly.com/question/27120701
1) How many joules of heat are required to raise the temperature of 550 g of water from
12.7 °C to 28.8°C ? Specific heat of liquid water is 4.184 J/g °C.
Answer:
Explanation:
You can use [tex]Q = mc\Delta T=(550)(4.184)(28.8-12.7)=37049.32[/tex] joule.
If a snowboarder’s initial speed is 4 m/s and comes to rest when making it to the upper level. With a slightly greater initial speed of 5 m/s, the snowboarder is moving to the right on the upper level. His final speed in this case is 3 m/s. Suppose this situation is repeated on planet Epsilon, where gravity is less than gravity on earth.
A. Would the height of the hill on Epsilon cause a reduction in speed from 4 m/s to 0 greater than, less than, or equal to the height of the corresponding hill on earth? Explain.
B. Consider the hill on Epsilon discussed in part A. If the initial speed at the bottom of the hill is 5 m/s, will the final speed at the top of the hill be greater than, less than, or equal to 3 m/s? Explain.
(a) At a corresponding hill on Earth and a lesser gravity on planet Epslion, the height of the hill will cause a reduction in the initial speed of the snowboarder from 4 m/s to a value greater than zero (0).
(b) If the initial speed at the bottom of the hill is 5 m/s, the final speed at the top of the hill be greater than 3 m/s.
Conservation of mechanical energy
The effect of height and gravity on speed on the given planet Epislon is determined by applying the principle of conservation of mechanical energy as shown below;
ΔK.E = ΔP.E
¹/₂m(v²- u²) = mg(hi - hf)
¹/₂(v²- u²) = g(0 - hf)
v² - u² = -2ghf
v² = u² - 2ghf
where;
v is the final velocity at upper levelu is the initial velocityhf is final heightg is acceleration due to gravitywhen u² = 2gh, then v² = 0,
when gravity reduces, u² > 2gh, and v² > 0
Thus, at a corresponding hill on Earth and a lesser gravity on planet Epslion, the height of the hill will cause a reduction in the initial speed of the snowboarder from 4 m/s to a value greater than zero (0).
Final speedv² = u² - 2ghf
where;
u is the initial speed = 5 m/sg is acceleration due to gravity and its less than 9.8 m/s²v is final speedhf is equal heightSince g on Epislon is less than 9.8 m/s² of Earth;
5² - 2ghf > 3 m/s
Thus, if the initial speed at the bottom of the hill is 5 m/s, the final speed at the top of the hill be greater than 3 m/s.
Learn more about conservation of mechanical energy here: https://brainly.com/question/6852965
Which statement about the interference behavior of electromagnetic radiation seen in the double-slit test experiment is true? (1 point)
O Waves that make up the radiation collide with each other so that they add together or cancel each other out.
O Particles that make up the radiation collide with each other so that they add together or cancel each other out.
O Particles that make up the radiation collide with each other and scatter randomly.
O Waves that make up the radiation do not interact with each other.
Waves that make up the radiation collide with each other so that they add together or cancel each other out.
What is Interference?This is the phenomenon which occurs when two waves meet while traveling along the same medium.
In the double-slit test experiment, bright and dark fringes was observed which was caused by the superposition of overlapping light waves originating from the two slits which is why option A was chosen as the most appropriate choice.
Read more about Interference here https://brainly.com/question/9655287
[tex]Question: $x_{1}=\frac{5}{2}[\sin (2 \pi t)+\cos (2 \pi t)], x_{2}=5\left[\sin \left(2 \pi t+\frac{\pi}{4}\right)\right]$[/tex]
Find the ratio of the amplitude of the given motion?
Options:
[tex](a) $\sqrt{2}: 1$\\(b) $2: 1$\\(c) $1: \sqrt{2}$\\(d) $1: 2$[/tex]
Condense x₁ to get
sin(2πt) + cos(2πt) = √2 • (sin(2πt) + cos(2πt))/√2
… = √2 (cos(2πt) cos(π/4) + sin(2πt) sin(π/4))
… = √2 cos(2πt - π/4)
So the amplitude of x₁ is (5/2) • √2 = 5/√2, while the amplitude of x₂ is 5. The ratio between them is then 5/√2 : 5, or equivalently 1/√2 : 1 or 1 : √2.
Loosing weight without diet require moving to the top of a mountain explain using weight and gravitational force
Answer:
You would weigh very slightly more at sea level than at the top of a mountain, not enough for you to notice, but a measurable amount. Weight, which really means gravitational force, is proportional to the product of the masses of two objects acting on each other, in this case the giant earth and the minuscule you.
Explanation:
.
Which of the following is not true about the lymphatic system?
it drains white blood cells away from tissue
it brings nutrients to the tissue
it builds muscle cells
it fights infection
Answer:
it builds muscle cells
Explanation:
took test
Match the missions with their objectives.
NEAR
Lunar Prospector
Deep Impact
SETI
mapping the Moon's surface composition,
looking for possible deposits of polar ice,
and examining the Moon's resources,
structure, and origins
first space probe to orbit and perform
an in-depth Investigation of an asteroid
searching for extraterrestrial life in the universe
probing beneath the surface of a comet to
obtain clues about its internal composition
and structure
Matching the missions with their objectives
NEAR -------> First space probe to orbit and perform an in-depth Investigation of an asteroid. Lunar prospector ----- > mapping the Moon's surface composition,looking for possible deposits of polar ice,and examining the Moon's resources,structure, and origins.Deep Impact -------> probing beneath the surface of a comet to obtain clues about its internal composition and structureSETI -----> searching for extraterrestrial life in the universeThe Mission OverviewThe NEAR ( Near Earth Asteroid Rendezvous ) is a mission whose objective is to study origin and nature of objects near the earth such as asteroids and comets.
Lunar prospector was a mission designed to perform an orbit investigation of the moon.
The deep impact mission created by NASA was to probe beneath the comet and discover the structure and composition. The deep impact projected lasted for 9 years in space.
Hence we can conclude that the missions and their objectives are as listed above.
Learn more about NASA missions : https://brainly.com/question/11361589
Consider the two-slit interference experiment. Electromagnetic radiation passes through the two slits that are a distance of 0.0170 nm apart. A fourth-order bright fringe forms at an angle of 8.0 degrees relative to the incident beam. What is the wavelength of the light? (1 point)
O 581 nm
O 420 nm
O 789 nm
O 591 nm
Answer:
The answer is 581
Explanation:
I just took the Quick Check and got it right.
1. A person walks 20 meters toward the east and then walks 30 meters toward the west. What is the total distance covered? What is the displacement? with explaination
2. What is the average speed of a car that travels 2000 meters in 5 minutes in meters/second? with explaination
Answer:
1.) 30 m is the total distance covered 10m is the displacement you
2.)24,000m/h (24km/h or 6.67m/s) Average speed is calculated by dividing the total distance that something has traveled by the total amount of time it took it to travel that distance
Explanation:
list down the general of the office of guardian and tutor
Answer:
legal guardians, the four types: personal guardians, financial guardians, conservators, and pet “guardians”
6. A spring is originally 1.5 m long. It is stretched so that it is 1.8 m long. The spring constant is 50 N/m.
Find the potential energy stored in the spring.
Answer:
PE = 1/2 K X^2
K = 50 N/m
X = .3 m
PE = 1/2 * 50 * .3^2 = 2.25 Joules
A DJ is setting up their equipment and measures the sound level near a speaker to be 55.65dB. They decide to add two more speakers next to the first. What would they measure the new sound level to be?
For a DJ is setting up their equipment and measures the sound level near a speaker to be 55.65dB, the new sound level is mathematically given as
L=50.470dB
What would they measure the new sound level to be?Generally, the equation for the sound level is mathematically given as
l=10logl/io
Therefore
logl/io=5.57
Hence
I=3.715*10^−8
In conclusion
L'=10log(3*3.715*10^−8)/10^{-12}
L=50.470dB
Read more about Energy
https://brainly.com/question/13439286
Year
Carbon Dioxide (CO2) in Atmosphere (ppm*)
2010
2011
Copyright © Enginuity Inc.
Copyright © Enginuity Inc.
Global Temperature Change – Student Guide
2012
2013
2014
2015
2016
2017
Answer:
Theres a diagram missing for Q
Explanation:
What is all this?
Could you add a question so I can answer it :)
6. When can you say that an object is accelerating?
A. when the speed remains the same
B. When the speed is changing
C. when the instantaneous velocity is the same
D. When there is a uniform motion
give explanation
Answer:
When the speed is changing is the correct answer
Explanation:
Because acceleration is rate of change of velocity
PLEASE MARK ME BRAINLIEST IF MY ANSWER IS CORRECT PLEASE
Spring
The pulling force acting on an object is 350.0 N. It also is being affected by a 50.0 N
kinetic friction force. As a result, its acceleration is 3.0 m/s?, what is its mass?
A. 67 kg
B. 83 kg
C. 100 kg
D. 600 kg
E. 0.0 kg
If the gravitational force of the Farth nulling you"down" in th
Answer:
100 kg
Explanation:
Net force = 350 - 50 = 300 N
F= ma
300 N = m * 3 m/s^2
100 kg = mass
The sound intensity at a distance of 19 m from a noisy generator is measured to be 0.24 W/m2. What is the sound intensity at a distance of 27 m from the generator
Answer:
0.1111 W/m²
Explanation:
If all other parameters are constant, sound intensity is inversely proportional to the square of the distance of the sound. That is,
I ∝ (1/r²)
I = k/r²
Since k can be the constant of proportionality. k = Ir²
We can write this relation as
I₁ × r₁² = I₂ × r₂²
I₁ = 0.25 W/m²
r₁ = 16 m
I₂ = ?
r₂ = 24 m
0.25 × 16² = I₂ × 24²
I₂ = (0.25 × 16²)/24²
I₂ = 0.1111 W/m²
An object with a mass of 70.5 kg is placed on a 2-meter strand of metal (with a 2-millimeter radius) hanging from the ceiling. It stretches 1 millimeter. What is this strand made of?
Based on the value of the Young's modulus, the strand of the metal is made of copper.
Young's modulus of the metalThe Young's modulus of the metal is calculated as follows;
E = stress/strain
Stress of the metalThe stress of the metal is calculated as follows;
σ = F/A = mg/A
where;
A is area of the metal
A = πr²
A = π( 2 x 10⁻³)²
A = 1.257 x 10⁻⁵ m²
σ = (70.5 x 9.8) / (1.257 x 10⁻⁵)
σ = 5.5 x 10⁷ N/m²
Strain of the metalThe strain is calculated as follows;
strain = x/L
where;
x is extension
L is original length
strain = (1 x 10⁻³ m) / 2 m
strain = 5 x 10⁻⁴
Young's modulus of the metal
E = stress/strain
E = (5.5 x 10⁷ ) / (5 x 10⁻⁴)
E = 1.1 x 10¹¹ N/m²
E = 110 Gpa
The Young's modulus of copper metal is 110 Gpa
Thus, based on the value of the Young's modulus, the strand of the metal is made of copper.
Learn more about Young's modulus here: https://brainly.com/question/6864866
The Empire State Building is about 381m high. If you threw a baseball downward at 25 m/s from the top of the building how fast would it be traveling just before it landed?
Answer:
Explanation:
You can use that [tex]v = v_{o}+gt[/tex] or [tex]v^{2}=v_{o}^{2}+2gh=(25)^{2}+(2)(10)(381)=8245 \rightarrow v \approx 90.8[/tex] m/s.
If a→=3i^-2j^-k^ and b→=i^+4j^+k^, find a unit vector n^ normal to the plane containing a→ and b→ such that a→, b→ and n^, in this order, form a right-handed system.
The unit vector normal to the plane is ; n = [tex]\frac{i}{\sqrt[3]{6} } - \frac{2j}{\sqrt[3]{6} } + \frac{7k}{\sqrt[3]{6} }[/tex]
Given data :
The unit vectors
a→=3i^-2j^-k^ and b→=i^+4j^+k^
Determine the unit vector normal to the planeThe unit vector normal to the plane is calculated as
n = [tex]\frac{a*b}{|b*b|}[/tex] ---- ( 1 )
where ; a→ * b→ = 2i - 4j + 14k and |b * b| = [tex]\sqrt{216}[/tex]
back to equation ( 1 )
n = ( 2i - 4j + 14k ) / [tex]\sqrt{216}[/tex]
= [tex]\frac{i}{\sqrt[3]{6} } - \frac{2j}{\sqrt[3]{6} } + \frac{7k}{\sqrt[3]{6} }[/tex]
Hence we can conclude that The unit vector normal to the plane is ; n = [tex]\frac{i}{\sqrt[3]{6} } - \frac{2j}{\sqrt[3]{6} } + \frac{7k}{\sqrt[3]{6} }[/tex]
Learn more about unit vector : https://brainly.com/question/1615741
Can someone help with this
Hi there!
A.
We can use the work-energy theorem to solve.
Initially, both blocks have gravitational potential energy, which is then converted to kinetic energy.
Recall:
[tex]U = mgh \\[/tex]
U = Potential Energy (J)
m = mass (kg)
g = acceleration due to gravity (m/s²)
h = height (m)
And at the end, block 2 has both kinetic and potential energy. Kinetic is defined as:
[tex]KE = \frac{1}{2}mv^2[/tex]
v = velocity (m/s)
We can do a summation of initial and final forces.
Initial:
[tex]E_i = m_2g\frac{h}{2} + m_1gh[/tex]
Final:
[tex]E_f = \frac{1}{2}m_2 v^2 + m_2g\frac{3h}{2} + \frac{1}{2}m_1 v^2[/tex]
Set the two equal (no energy loss in this situation) and solve for velocity.
[tex]m_2g\frac{h}{2} + m_1gh = \frac{1}{2}m_2 v^2 + m_2g\frac{3h}{2} + \frac{1}{2}m_1 v^2\\\\m_2g\frac{h}{2} + m_1gh - m_2g\frac{3h}{2} = \frac{1}{2}m_2 v^2 + \frac{1}{2}m_1 v^2\\\\v^2 = \frac{gh(\frac{m_2}{2} + m_1 - \frac{3m_2}{2})}{\frac{1}{2}m_2 + \frac{1}{2}m_1}\\\\v = \sqrt{\frac{gh(\frac{m_2}{2} + m_1 - \frac{3m_2}{2})}{\frac{1}{2}m_2 + \frac{1}{2}m_1}}\\\\v = \boxed{3.704 \frac{m}{s}}[/tex]
**This can be solved in a simpler way using a summation of forces.
B.
Now, we can do a summation of forces to solve. First, we must solve for the acceleration of the system now that we have found the velocity. Use the kinematic equation:
[tex]v_f^2 = v_i^2 + 2ad[/tex]
Initial velocity is 0 m/s, so:
[tex]v_f^2 = 2ad\\\\a = \frac{v_f^2}{2d} = \frac{(3.704^2)}{2(2.10)} = 3.267 \frac{m}{s^2}[/tex]
Now, we can use a summation of forces for any block. We can do block 1:
[tex]\Sigma F = m_1g - T[/tex]
Using Newton's Second Law:
[tex]m_1a = m_1g - T\\\\T = m_1g - m_1a \\T = m_1 (g - a) = 4.10(9.8 - 3.267) = \boxed{26.828 N}[/tex]
is this right lol i think it is but im not so sure XD
[tex]\bold{Heya!}[/tex]
Yup. your answer is correct!
→ EXPLANATION :-1. just put the numbers in order [tex]^1^6^, ^1^8^,^2^3^,^2^4^,^2^9^,^3^0[/tex]2. Cross off high/low pairs, we left with the numbers :-[tex]23,24.[/tex]
3. Add the leftover numbers.[tex]23 \: + 24 = 47.[/tex]
Divide the sum of 2.[tex]\frac{47}{2} = 23.5[/tex]
Hopefully This Helps ! ~
#LearnWithBrainly
[tex]\underline{Answer :}[/tex]
Jaceysan ~
Answer:
GIVE HIM BRAINLEST
For the statements based on whether they are described as outcomes of results from thermal energy being added or removed particles move faster particles move slower temperature increases temperature decreases kinetic energy increases kinetic energy decreases thermal energy added thermal energy removed
The measured value of mass M in an experiment is M = 0.743 ± 0.005kg. The error in 2M is
Select one:
dM
3dM
2.5 dM
2dM
Given the measured value of mass M in the experiment the error in 2M is ; dM
Given data :
Measured value of mass M = ( 0.743 ± 0.005 ) kg
The error in 2M in the measured valueThe error in 2M in the measured value M = 0.743 ± 0.005 kg is dM while the error in M² will be 2dM
Hence we can conclude that the measured value of mass M in the experiment the error in 2M is ; dM.
Learn more about error in 2M : https://brainly.com/question/6650225
the dimensions of a cuboidal block are 2.5 m * 2m * 1.2m its weight 900 n what is the minimum presseure exerted by the block on the surface of its support.?
Answer:
your answer is here 180
Explanation:
900/2.5 * 2 = 180
Answer:
The answer is 180 Pa.
Explanation:
Given;Here, weight = thrust = 900 N,
dimensions are 2.5 m × 2 m × 1.2 m
To Find;Pressure exerted by the block on the surface of its support.Formula;Pressure = Thrust ÷ AreaWe know that, Pressure is inversely proportional to area. For the minimum pressure the area must be more.
So, if the block is resting with 2.5 m × 2 m surface on the support, the pressure will be minimum.
Pressure = 900 N ÷ 2.5 × 2.0 m² = 180 Pa
Thus, The pressure exerted by the block on the support is 180 Pa.
