A 0.506 g sample of solid calcium hydroxide was dissolved in some water and then titrated with 28.85 mL of hydrochloric acid to neutralize, then the molarity of HCl is 0.471 M.
How do we calculate molarity?Molarity will be calculated by using the below equation as:
M = n/V, where
V = volume of solvent
n is the moles of solute and it will be calculated by using the below equation:
n = W/M, where
W = given mass
M = molar mass
Given chemical reaction is:
Ca(OH)₂ + 2HCl → CaCl₂ + 2H₂O
Moles of Ca(OH)₂ = 0.506g / 74.093g/mol = 0.0068 mol
From the stoichiometry of the reaction:
0.0068 moles of Ca(OH)₂ = reacts with 2×0.0068 = 0.0136 moles of HCl
Given volume of HCl = 28.85mL = 0.02885 L
On putting values on the molarity equation, we get
M = 0.0136 / 0.02885 = 0.471 M
Hence required molarity of HCl is 0.471 M.
To know more about molarity, visit the below link:
https://brainly.com/question/14469428
#SPJ1
how does the melting point of a substance indicate the strength of its intermolecular force of attraction
Answer:
The molecules are held together by intermolecular force of attraction. More the force the fusion takes after some time only that means the melting point is high. So molecules with greater molecular forces have high melting point and less molecular forces have low melting point.
Answer:
On heating a solid, the kinetic energy of the particle increases. The particle start vibrating with greater speed. The energy supplies by heat overcomes the force of attraction between the particles.
If this force of attraction is more, then more heat energy will be necessary to overcome this force. So, the melting point of the solid will be higher.
Becquerel placed photographic paper in a drawer with some radioactive rocks and discovered that the amount of exposure on the paper was proportional to the amount of uranium that was present in the rocks. True False
Becquerel did not discover that the amount of exposure on the paper was proportional to the amount of uranium that was present in the rocks
What is radioactivity?The phenomenon of radioactivity was discovered by the French scientist Henri Becquerel in 1896 when he placed photographic paper in a drawer with some radioactive rocks.
We have to note that Becquerel did not discover that the amount of exposure on the paper was proportional to the amount of uranium that was present in the rocks hence the stetement is false.
Learn more about radioactivity: https://brainly.com/question/1770619?
How many particles are there in 3 moles of Ag?
Answer:
6.022×1023 individual items of that something. You have 3 moles, so there are 3×6.022×1023 oxygen molecules
Explanation:
6.022×1023 individual items of that something. You have 3 moles, so there are 3×6.022×1023 oxygen molecules
Why can’t sodium metal be manufactured by the electrolysis of brine?
Answer:
Explanation:
The quick and short answer to this question is that the moment it is made into Na (the atom) the moment that happens, Na will react with water to become NaOH. Sodium is very responsive to water.
Equation
2Na + 2HOH ====> 2NaOH + H2
Which jobs does the respiratory system do? Select all that apply. It brings oxygen into the blood. It removes carbon dioxide waste from the blood. It pumps blood throughout the body. It takes in oxygen from air or water.
Answer:
probably the last one should hbthrbwhdee.
Answer:
it brings oxygen into the blood and removes carbon dioxide
Explanation:
1. If the water is not completely removed from the salt during the heating process will the reported water-to-salt mole ratio (X) be high or low? Explain
Answer:
The water in the hydrate (referred to as "water of hydration") can be removed by heating the hydrate. When all hydrating water is removed, the material is said to be anhydrous and is referred to as an anhydrate.
Explanation:
If the water is not completely removed from salt during heating process it will result in higher mole ratio of water to salt as mass of water will also be accounted while calculating mole ratio.
What is salt?Salt is defined as a chemical compound which is ionic in nature and consists of cation and an anion.It has no net electrical charge as the charges are completely neutralized in case of salts.
They are classified as acidic, basic or neutral salts depending on the ions they produce on dissolution.They have wide variety of colors depending on the elements from which they are formed and have five basic tastes.Salts are usually odorless except a few exceptions . They are highly soluble in water and are insulators in the solid state, to make them conductive they need to be melted or dissolved.
Learn more about salts,here:
https://brainly.com/question/14618515
#SPJ2
The correct IUPAC name for 2-isopropylbutane is: a) 2-ethylpentane b) 2,3-dimethylpentane c) 2-methylhexane d) 3-methylhexane
Answer:
a
Explanation:
On drawing the structure, the most Carbon atoms in a row is 5
⇒ pentaneThe remaining two carbon atoms are connected to the 2nd carbon atom
2-ethylIUPAC name is :
2-ethyl + pentane2-ethylpentaneWhat is the volume of hydrogen chloride under normal conditions, if its mass is 73 g?
Explanation:
36.5 g of HCl occupies 2.24×10-2m3 . ∴ 73 g of HCI at STP will occupy 2.24×10-236.5×732=4.48×10-2m3.
During photosynthesis, a green plant produces 122 mL of oxygen gas at STP. What mass of glucose
(C6H12O6) is produced during this reaction?
6CO2+ 6H2O > C6H12O6+ 602
Show all steps (Answer: 0.164g)
Answer:
About 0.164 g of glucose.
Explanation:
We can determine the mass of glucose produced given the volume of oxygen gas produced with stoichiometry.
Recall that at STP, a mole of any gas occupies a volume of 22.4 L.
From the reaction, six moles of oxygen gas is produced for every one mole of glucose.
Lastly, the molecular weight of glucose is 180.18 g/mol.
Therefore:
[tex]\displaystyle \begin{aligned} 122\text{ mL O$_2$} & \cdot \frac{1\text{ L O$_2$}}{1000\text{ mL O$_2$}}\cdot \frac{1\text{ mol O$_2$}}{22.4\text{ L O$_2$}} \cdot \frac{1\text{ mol C$_6$H$_{12}$O$_6$}}{6\text{ mol O$_2$}} \cdot \frac{180.18\text{ g C$_6$H$_{12}$O$_6$}}{1\text{ mol C$_6$H$_{12}$O$_6$}} \\ \\ & = 0.164\text{ g C$_6$H$_{12}$O$_6$}} \end{aligned}[/tex]
Therefore, about 0.164 g of glucose is produced.
If a 50.00 mL of 0.0155 M HI(aq) is mixed with 75.00 mL of 0.0106 M KOH(aq), what is the pH of the final solution
If a 50.00 mL of 0.0155 M HI(aq) is mixed with 75.00 mL of 0.0106 M KOH(aq), the pH of the final solution is mathematically given as
pH=13.16
What is the pH of the final solution?Generally, the equation for the Chemical reaction is mathematically given as
2HI+Ba(OH_2)--->BaI2+2H2O
Therefore
pOH=-log{OH}
pOH=-log(6.52)
pOH=0.8142
In conclusion, for the pH
pH+pOH=14
pH=14-0.8142
pH=13.16
Read more about Chemical reaction
https://brainly.com/question/16416932
i’ll give brainliest to whoever can give me these answers or at least the intra and intermolecular bonds answers
#1
Intermolecular bonds:-
One Single bond#Carbon monoxide
Formula:-
COMolecular geometry
LinearDrawing
C=OBonds=3
#Silicon tetrafluoride
Formula
SiF_4geometry
TetrahedralBonds=4
#Titanium (4) Sulfide
TiS_2Geometry
LinearBonds=2
If you were to classify a newly discovered animal, what would you want to know first?
Does it live on land or in the sea?
Does it have a backbone?
Does it have hair?
Does it have vascular tissue?
Answer:
A
Does it live on land or sea.
Answer:
C:
I would check that does it have hair or not because hair provides info about the DNA which can help me if that specific animal has evolved from DNA of any other animal..
Hope it helped you.
As a solution becomes more basic:
Which of the following is an ionic compound?
A. N2O B. CO C. HCL D. Na2O
Answer:
D. Na2O
Because we already know that sodium oxide is a binary ionic compound because it contains one metal cation and one non-metal anion.
Answer:
D. Na2O
Explanation:
Sodium oxide (Na2O) is an ionic compound. Its constituent atoms are, respectively, a metal and a non-metal.
Sodium (Na), as a metal, will attempt to lose electrons to reach an octet state. Oxygen (O2), as a non-metal, will attempt to gain electrons to reach an octet state.
:-befrank
3.4 For each of the following elements, locate it in the Periodic Table, and indicate whether it is a metal, metalloid, or non-metal. (3) 4.4.1 Germanium (Ge) 4.4.2 Selenium (Se) 4.4.3 Beryllium (Be)
According to its location in the periodic table:
Ge: Period 4, Group 14. Metalloid.Se: Period 4, Group 6, Non-metal.Be: Period 2, Group 2, Metal.What is a periodic table?It is a table in which elements are ordered in Groups (columns) and Periods (rows).
According to their ubication and properties they can be classified in:
Metals: occupy the left and center of the table.Metalloids: occupy the right of the table (dark green in the attached table).Non-metals: occupy the right of the table (yellow and light green in the attached image).Let's locate and classify the following elements:
Germanium: Period 4, Group 14. Metalloid.Selenium: Period 4, Group 6, Non-metal.Beryllium: Period 2, Group 2, Metal.Learn more about the periodic table here: https://brainly.com/question/14514242
Why Hydrochloric acid (HCl) is not an oxidizing agent?
please help I need proper explanation!
Answer:
Strong acids completely dissociate in water to H+ ions and extremely weak conjugate base anions.
Explanation:
its a weak acid
Answer:
because its didn't form H+ ions when react with water
11. As early as 1938. the use of NaOH was suggested as a means of removing CO2 from the cabin of a spacecraft according to the following (unbalanced) reaction: NaOH +CO2-
Na2CO3 + H2O.
a. If the average human body discharges 925,0 g CO, per day, how many moles of NaOH are
needed each day for each person in the spacecraft?
b. How many moles of each product are formed?
For a (unbalanced) reaction: NaOH +CO2-Na2CO3 + H2O, the moles of NaOH and moles of each product are formed are mathematically given as
a) Moles of NaOH =44.05
b) Moles of Na2CO3=21.0
Moles of H2O= 21.0What is the moles of NaOH and what moles of each product are formed?
Generally, the equation for the Chemical reaction is mathematically given as
2 NaOH(aq)+ CO2(g)------> Na2CO3(aq)+ H2O(l)
Therefore
Moles of CO2= 925/44
Moles of CO2=21.0
Hence
Moles of NaOH = 2 x Moles of CO2
Moles of NaOH = 2x925/44
Moles of NaOH =44.05
In conclusion
Moles of Na2CO3 925/44
Moles of Na2CO3=21.0
And
Moles of H2O= 925/44
Moles of H2O= 21.0
Read more about Chemical reaction
https://brainly.com/question/16416932
How can Climate Change impact the formation of Hurricanes?
I will give brainlist
The partial pressures of gases A, B, and C in a mixture are
0.75 atmosphere, 0.25 atmosphere, and 1.25 atmospheres,
respectively. What is the total pressure of the gas mixture
in millimeters of Hg?
A. 1710 mm of Hg
B.
1140 mm of Hg
C. 760.0 mm of Hg
D. 570.0 mm of Hg
Answer:
A
Explanation:
.75 + .25 + 1.25 = 2.25 atm
1 atm is 760 mm hg
2.25 * 760 = 1710 mm HG
Answer:
[tex]\huge\boxed{\sf 2.25\ atm = 1710\ mm\ of\ Hg}[/tex]
Explanation:
Partial pressure of gas A = 0.75 atm
Partial pressure of gas B = 0.25 atm
Partial pressure of gas C = 1.25 atm
Total partial pressure = 0.75 atm + 0.25 atm + 1.25 atm
= 2.25 atm
We know that:
1 atm = 760 mm of Hg
Multiply 2.25 to both sides
2.25 atm = 760 × 2.25 mm of Hg
2.25 atm = 1710 mm of Hg
[tex]\rule[225]{225}{2}[/tex]
Does cooking temperature affect the concentration of ethanoic acid in vinegar, measured by acid-base titration?
Yes it will.
Explanation:
At cooking temperature the concentration of ethanoic acid may be affected as the solution will boil therefore evaporating the water that will increase the concentration of acid in the solution.
When liquids of a ph 5 and ph 2 mixed together, gives what ph value
Answer:
By mixing two solutions of differing pH values, the final pH of the mixed solution is going to be a function of the pH-, or the hydrogen ion (H+), of the lower pH solution, and the final volume. The hydrogen ion(H+) of the higher pH solution has little to no effect in the final pH value.
Balance the following equation.
( ? )NaCl + ( ? ) AgNO3 → ( ? ) AgCl + ( ? ) NaNO3
Balanced equation:
NaCl + ( 1 ) AgNO₃ → ( 1 ) AgCl + ( 1 ) NaNO₃
(aq) (aq) (s) (aq)
Both the sides are already balanced
What is h+ concentrate in a solution with a pH of 1.25 round to nearest hundredth
Answer:
0.0562
Explanation:
Ph=-log[H+]
to find the h+ is the antilogarithm of the Ph.
Which is 10 raised to the power - Ph.
Answer:
5.62
-2
Explanation:
What is the H+ concentration in a solution with a pH of 1.25? Round to the nearest hundredth.
5.62 × 10n M n= -2
An ideal gas occupies 400ml at 270 mm Hg and 65°C. If the pressure is changed to 1.4 atm and the
temperature is increased to 100°C, what is the new volume?
Answer:
113 ml
Explanation:
PV = nRT remember T must be in Kelvin Volume in L
270 * .4 = n 62.4* 338.15
n = .005118
1.4 atm = 1.4 * 760 = 1064 mm
1064 * V = .005118 * 62.4 * 373.15
V = .113 l
5. Which equation represents a balanced chemical equation?
O CF4 + 2Br2 → CBr4 + 2F2
O N2 + 3F2 + NF3
OPA+ O2 + 2P203
O K+ Cl2 + 2KCI
Answer:
Cf4 + 2Br2 gives CBr4 +2F2
Explanation:
b/c there are balanced
13. Subtract 0.291 from 0.4
I need a breakdown of the answer?
-0.109 is the answer :)
You could basically just do column subtraction
Predict: How do you think you could use the Gizmo to make the color gray? _____________
_________________________________________________________________________
Observe: Change the Red, Green, and Blue values to 90. What color does this produce?
_________________________________________________________________________
The simplest way to make the color gray is by mixing white and black colors, but it can also be created by mixing colors such as red and green.
What is the grey color?This is considered a neutral and cool color that can be naturally found in elements such as rocks.
How can you make this color by mixing other colors?Neutral gray: The eeasiest way to create this color is by mixing black and white. This would give you a very neutral gray.Other shades: It is also possible to make this color by mixing colors that are opposite in the colors scale such as:Yellow and purples.Red and green.This would not be a neutral gray as it will resemble a little bit the original colors.
Learn more about colors in: https://brainly.com/question/19580247
How many grams are in 4.25 moles of NiS?
Answer:
386.75 grams
Explanation:
You can use dimensional analysis to help you solve for this question
1. set up a proportion
x grams
4.25 mol x x mole
2. to find the amount of grams/mol that are in NiS we find the gram formula mass (mass of all the atomic masses of each element)
Ni- 59 grams
S- 32 grams
add these together and you get 91 g/mol
3. now plug in the values and multiply across
91 grams
4.25 mol x 1 mole
when you multiply across this is equal to 386.75 grams
Does combining the glue and water create a physical or chemical change?
The combination of glue and water creates a physical change rather than a chemical change.
Physical and chemical changesPhysical changes are changes to the physical properties of materials and are usually reversible.
Chemical changes, on the other hand, are changes to the chemical properties of materials and are usually irreversible.
Mixing water with glue will only result in the glue being diluted with water and creates no chemical reaction. The glue can be recovered by distilling off the water.
Thus, mixing glues with water is only a physical change as the chemical properties of the glue remain intact.
More on physical and chemical changes can be found here: https://brainly.com/question/11321843
Based upon the chemical equation in #2 above, if 45.7g C2H4O2 are used in the reaction, how many grams of H2O will result
calcium chloride and carbon dioxide
