7) A ball is thrown upward at an initial velocity of 8.2 m/s, from a height of 1.8 meters above the ground. The height of the ball h, in metres can be represented, after t seconds, is modelled by the equation h = –4.8t² + 8.2t + 1.8. (a) Determine the height of the ball after 1.7 seconds.

7) A Ball Is Thrown Upward At An Initial Velocity Of 8.2 M/s, From A Height Of 1.8 Meters Above The Ground.

Answers

Answer 1

[tex] \\ \tt \longmapsto \: h = - 4.8 {t}^{2} + 8.2t + 1.8 \\ \\ \tt \longmapsto \: h = - 4.8(1.7) {}^{2} + 8.2 \times 1.7 + 1.8 \\ \\ \tt \longmapsto \: - 4.8 \times 2.89 + 1.39 + 1.8 \\ \\ \tt \longmapsto \: 13.8 + 1.39 + 1.8 \\ \\ \tt \longmapsto \: 17.06[/tex]


Related Questions

Describe the responses of the human ear to sound waves coming from the
right side, left side, or in phase.

Answers

If the sound comes from the right side, the waves reach the right ear before the left ear. if the sound comes from the left side, the waves reach the left ear before the right ear. The difference between the phases of waves reaching both ears is detected by the ears and then interpreted by the brain

A bullet with a mass mb=13.5 g is fired into a block of wood at velocity vb=245 m/s. The block is attached to a spring that has a spring constant k of 205 N/m. The block and bullet continue to move, compressing the spring by 35.0 cm before the whole system momentarily comes to a stop. Assuming that the surface on which the block is resting is frictionless, determine the mass mw of the wooden block.

Answers

Momentum is conserved, so the sum of the momenta of the bullet and block before collision is equal to the momentum of the combined bullet-block system,

[tex]m_bv_b+m_wv_w = (m_b+m_w)v[/tex]

where v is the speed of the bullet-block system. The block starts at rest so it has no initial momentum, and solving for v gives

[tex]v = \dfrac{m_b}{m_b+m_w} v_b[/tex]

The total work W performed by the spring on the bullet-block system as it is compressed a distance x is

[tex]W = -\dfrac12kx^2[/tex]

where k is the spring constant, and the work done is negative because the restoring force of the spring opposes the bullet-block as it compresses the spring.

By the work-energy theorem, the total work done is equal to the change in the bullet-block's kinetic energy ∆K, so we have

[tex]W_{\rm total} = W = \Delta K[/tex]

The bullet-block starts moving with velocity v found earlier and comes to a stop as the spring slows it down, so we have

[tex]-\dfrac12kx^2 = -\dfrac12(m_b+m_w)v^2 \implies kx^2 = \dfrac{{m_b}^2}{m_b+m_w}{v_b}^2[/tex]

Solve for [tex]m_w[/tex]:

[tex]m_w=\dfrac1k\left(\dfrac{m_bv_b}x\right)^2-m_b[/tex]

[tex]m_w=\dfrac1{205\frac{\rm N}{\rm m}}\left(\dfrac{(0.0135\,\mathrm{kg})\left(245\frac{\rm m}{\rm s}\right)}{0.350\,\rm m}\right)^2-0.0135\,\mathrm{kg}\approx \boxed{0.422\,\mathrm{kg}}[/tex]

Provide two positives and two negatives the Sarah‘s family would face if they switched to organic farming

Answers

Answer:

Organic farming would have higher costs, and would be more complex than conventional farming. However, the Suarez family could charge a higher price for organic produce. This type of farming also would be better for the land.

Explanation:

Answer expert verified for the same question. (question/4178423)

If 200 ml of tea at 90 °C is poured into a 400 g glass cup initially at 25 °C, what would be the final temperature of the mixture?
Note: The specific heat capacity of water is 4186 J/kg °C, and the specific heat capacity of glass is 840 J/kg °C.

Answers

The final temperature of the mixture is 43.62 °C, If 200 ml of tea at 90 °C is poured into a 400 g glass cup initially at 25 °C.

To solve the question above, we apply the law of calorimetry

The law of calorimetry: which states that if there is no lost of heat the surrounding, heat lost is equal to heat gained, or it can be stated as heat absorbed by a cold body is equal to heat released by a hot body, provided there is no lost of heat to the surrounding.

The law above is expressed mathematically as

[tex]Cm(T-t) = C'm'(t-T')[/tex]............. Equation 1

Using equation 1 to solve the question,

Let: C = specific heat capacity of glass cup, m = mass of glass cup, C' = specific heat capacity of tea, m' = mass of tea, T = initial temperature of tea, T' = initial temperature of glass cup, t = final temperature of the mixture.From the question,Given: m = 400 g = 0.4 kg, C = 840 J/kg°C, m' = 200g (tea is a liquid made of water and the volume of water in ml is thesame a its mass in gram) = 0.2 kg, C' = 4186 J/kg.°C, T = 90°C, T' = 25°CSubstitute these values into equation 1 and solve for t₃

[tex]0.4(840)(90-t) = 0.2(4186)(t-25)[/tex]

[tex]336(90-t) = 837.2(t-25)[/tex]

[tex]30240-336t = 837.2t-20930[/tex]

collect like terms

[tex]837.2t + 336t = 30240+20930[/tex]

[tex]1173.2t = 51170[/tex]

[tex]t = 51170/1173.2[/tex]

[tex]t = 43.62[/tex] °C

Hence, the final temperature of the mixture is 43.62 °C

Learn more about calorimeter here: https://brainly.com/question/15479803

Answer:

The final temperature of the system is 41.657 °C.

Explanation:

Let consider the tea-cup system as an isolated system, that is, a system with no energy and mass interactions with the surroundings. From the perspective of the First Law of Thermodynamics, the tea releases heat, which is received by the glass cup until thermal equilibrium is reached. The following formula represents the model under assumption that process was at steady state:

[tex]\rho_{w}\cdot V\cdot c_{w}\cdot (T_{w,o}-T) + m_{g}\cdot c_{g}\cdot (T_{g,o}-T) = 0[/tex] (1)

Where:

[tex]\rho_{w}[/tex] - Density of water, in grams per mililiter.

[tex]V[/tex] - Volume of tea, in mililiters.

[tex]c_{w}[/tex] - Specific heat of water, in joules per gram-degree Celsius.

[tex]m_{g}[/tex] - Mass of the glass cup, in kilograms.

[tex]c_{g}[/tex] - Specific heat of the glass cup, in joules per gram-degree Celsius.

[tex]T_{w,o}[/tex] - Initial temperature of tea, in degrees Celsius.

[tex]T_{g,o}[/tex] - Initial temperature of the glass cup, in degrees Celsius.

[tex]T[/tex] - Final temperature of the tea-cup system, in degrees Celsius.

If we know that [tex]\rho_{w} = 1\,\frac{g}{mL}[/tex], [tex]V = 200\,mL[/tex], [tex]c_{w} = 4.186\,\frac{J}{g\cdot ^{\circ}C}[/tex], [tex]m_{g} = 400\,g[/tex], [tex]c_{g} = 0.840\,\frac{J}{g\cdot ^{\circ}C}[/tex], [tex]T_{w,o} = 90\,^{\circ}C[/tex] and [tex]T_{g,o} = 25\,^{\circ}C[/tex], then the final temperature of the tea-cup system is:

[tex]\rho_{w}\cdot V\cdot c_{w}\cdot (T_{w,o}-T) + m_{g}\cdot c_{g}\cdot (T_{g,o}-T) = 0[/tex]

[tex]\rho_{w}\cdot V\cdot c_{w}\cdot T_{w,o} +m_{g}\cdot c_{g}\cdot T_{g,o} - (\rho_{w}\cdot V\cdot c_{w}+m_{g}\cdot c_{g})\cdot T = 0[/tex]

[tex]T = \frac{\rho_{w}\cdot c_{w}\cdot T_{w,o}+m_{g}\cdot c_{g}\cdot T_{g,o}}{\rho_{w}\cdot V\cdot c_{w}+m_{g}\cdot c_{g}}[/tex]

[tex]T = \frac{\left(1\,\frac{g}{mL} \right)\cdot \left(4.186\,\frac{J}{kg\cdot ^{\circ}C} \right)\cdot (200\,mL)\cdot (90\,^{\circ}C)+(400\,g)\cdot \left(0.840\,\frac{J}{g\cdot ^{\circ}C} \right)\cdot (25\,^{\circ}C)}{\left(1\,\frac{g}{mL} \right)\cdot \left(4.186\,\frac{J}{kg\cdot ^{\circ}C} \right)\cdot (200\,mL) +(400\,g)\cdot \left(0.840\,\frac{J}{g\cdot ^{\circ}C} \right)}[/tex]

[tex]T = 41.657\,^{\circ}C[/tex]

The final temperature of the system is 41.657 °C.

please ans both urgent ​

Answers

Answer:

d I guess not sure

b if down I guess

Explanation:

if worng then plz dont say anything as I am not sure about the ans

I say it’s blue have the maximum deviation in a prism I hope this help you

How do you format short quotations in an MLA-style document?

Answers

Answer:

To indicate short quotations (four typed lines or fewer of prose or three lines of verse) in your text, enclose the quotation within double quotation marks.

(a) What kind of energy is possessed by an aeroplane flying at a height of 10000 m?​

Answers

Answer:

When the plane is rest position it possess potential energy. But when a aeroplane is flying at the height it possess kinetic energy. No matter what height is given.

An open winding in an electric motor means that ____. A. a wire in a winding is broken B. the centrifugal switch to the start winding is open C. the winding is making contact with the motor frame D. one winding is making contact with another winding

Answers

Answer:

A. a wire in a winding is broken.

Explanation:

An electric circuit can be defined as an interconnection of electrical components which creates a path for the flow of electric charge (electrons) due to a driving voltage.

Generally, an electric circuit consists of electrical components such as resistors, capacitors, battery, transistors, switches, inductors, etc.

Basically, an electric circuit is considered to be open when there's a broken continuity (broken path), which causes no current to flow through the circuit.

On the other hand, a closed circuit is one in which there's a flow of current due to a complete electrical path.

On a related note, an open winding in an electric motor means that a wire in a winding is broken.

8. What type(s) of motion do the particles in a solid undergo? A. vibrational, rotational, and translational B. vibrational and rotational C. vibrational only D. rotational only​

Answers

Explanation:

Particles in solids are always vibrating (moving back and forth) in place.

if you add km/ hr with another km/ hr what will you get​

Answers

Answer:

km/hr

Explanation:

Addition and subtraction are commutative

Meaning you can add or subtract in any order because it doesn't change the sum or the difference. So it doesn't change the units.

Answer:

km/ hr + km/ hr =(km+ km)/hr=2km/hr

Explanation:

define mass defect and binding energy​

Answers

Answer:

About Transcript. Nuclear binding energy is the energy required to split an atom's nucleus into protons and neutrons. Mass defect is the difference between the predicted mass and the actual mass of an atom's nucleus. The binding energy of a system can appear as extra mass, which accounts for this difference.

Explanation:

PLZ MARK AS THE BRAINLIEST

I NEED IT URGENTLY

HAVE A GOOD DAY

MAY GOD BLESS U

: )

Un muelle se alarga 20 cm cuando ejercemos sobre él una fuerza de 24 N. Calcula:El valor de la constante elástica del muelle

Answers

Answer:

120 Nm-1

Explanation:

Según la ley de Hooke;

F = Ke

F = fuerza sobre el resorte

K = constante de fuerza

e = extensión

Por eso;

K = F / e

K = 24N / 20 × 10 ^ -2m

K = 120 Nm-1

The gravitational force of the two objects is 6.67x10-11N. Explain this statement.

Answers

Answer:

it means that the force of attraction between two object in gravitation is 6.67×10-11N

It means that the force of attraction between two object in gravitation is 6.67×10-11N.

What is the formula of mass in gravitational force?

The formula is g = GM/r2, Where M is the mass of the Earth, r is the radius of the Earth (or distance between the center of the Earth and you, standing on its surface), and G is the gravitational constant. G (without the subscripts) is the gravitational constant, and c is the speed of light.

What is the gravitational force between two objects?

The gravitational force between two objects is proportional to their masses and inversely proportional to the square of the distance between their centers. joining the two centers of masses.

Learn more about gravitational force here: brainly.com/question/13010127

#SPJ2

express in standard form
(I)0.000038​

Answers

Answer:

3.8 x 10^-5

Explanation:

all you doing is putting it in the standard form I hope this help

6x+8=32 kết quả x là bao nhiêu

Answers

Answer:

6x+8=32

6x=32-8

6x=24

x=24:6

x= 4

vậy, x =4

A train 90m long stops in a train station with its front buffers in line with a lamp post on the platform. Later it starts off with an average acceleration of 0.45m/s. What will be its speed in kilometers per hour when the tail buffers pass the lamp post P?​

Answers

Answer:

The speed of the train when the tail buffers pass the lamp post is 9 m/s

Explanation:

The given parameters are;

The length of the train = 90 m

The initial velocity of the train, u = 0

The average acceleration of the train, a = 0.45 m/s²

When the tail buffer pass the lamp post, P, we have;

The distance travelled, s = The length of the train = 90 m

The kinematic equation of motion is given as follows;

v² = u² + 2·a·s

Where;

v = The speed of the train when the tail buffers pass the lamp post

∴ v² = 0² + 2 × 0.45 m/s² × 90 m = 81 m²/s²

Therefore;

v = √(81 m²/s²) = 9 m/s

The speed of the train when the tail buffers pass the lamp post, v = 9 m/s.

A uniform bridge span of weight 1200 kN and of
length 17.0 m rests on a support of width 1.0 m at
either end. A stationary lorry of weight 60 kN is the
only object on the bridge. Its centre of mass is 3.0m
from the centre of the bridge.
15.0 m

Answers

45-4753that is your answer

We use __force to do different force. 1) pulling 2)pushing 3)gravity 4)muscular

Answers

Answer:

gravity

Explanation:

We use gravity to do different force.

help with this physics question please :)

Answers

Answer:

is that rm in you profile pic

2. ¿Puede haber trabajo en un sistema si no hay movimiento
a. Sí, si hay una fuerza siempre.
b. Sí, ya que el movimiento es sólo relativo.
c. No, ya que un sistema que no se mueve no tiene energía.
d. No, porque la ecuación de trabajo lo define.

Answers

Answer:

d. No, porque la ecuación de trabajo lo define.

Explanation:

En Física, el trabajo realizado se puede definir como la cantidad de energía transferida cuando un objeto o cuerpo se mueve a lo largo de una distancia debido a la acción de una fuerza externa.

Matemáticamente, el trabajo realizado viene dado por la fórmula;

[tex] W = F * d [/tex]

Dónde;

W es el trabajo realizado.F representa la fuerza que actúa sobre un cuerpo. d representa la distancia recorrida por el cuerpo.

Por lo tanto, podemos deducir de la definición de trabajo y su fórmula que el trabajo se realiza cuando un objeto (cuerpo) se mueve una distancia o experimenta cualquier forma de desplazamiento mientras transfiere energía.

Straight wire of indefinite length (transient) passed by an electric current of 5.0 A. The magnetic field generated around this conductor at point M is 50 μT. Thus the distance from the conductor to point M is:

A. 2π cm

B. 0.2π cm

C. 2.0 cm

D. 0.20 cm​

Answers

Answer:

C. 2.0 cm

Explanation:

The magnetic field around the wire at point M is given by Biot-Savart Law:

[tex]B = \frac{\mu_o I}{2\pi R}[/tex]

where,

B = Magnetic field = 50 μT = 5 x 10⁻⁵ T

I = current = 5 A

μ₀ = permeability of free space = 4π x 10⁻⁷ N/A²

R = distance of point M from wire = ?

Therefore,

[tex]5\ x\ 10^{-5}\ T = \frac{(4\pi\ x\ 10^{-7}\ N/A^2)(5\ A)}{2\pi R}\\\\R = \frac{(2\ x\ 10^{-7}\ N/A^2)(5\ A)}{5\ x\ 10^{-5}\ T}\\[/tex]

R = 0.02 m = 2 cm

Hence, the correct option is:

C. 2.0 cm

In a Rutherford scattering experiment, alpha parti- cles having kinetic energy of 7.70 MeV are fired toward a gold nucleus that remains at rest during the collision. The alpha particles come as close as 29.5 fm to the gold nucleus before turning around. (a) Calculate the de Broglie wave- length for the 7.70-MeV alpha particle and compare it with the distance of closest approach, 29.5 fm. (b) Based on this comparison, why is it proper to treat the alpha particle as a particle and not as a wave in the Rutherford scattering experiment

Answers

(a) The de Broglie wavelength is approximately 5.175 × 10⁻¹⁵  meters. The wavelength is lesser than the distance of closest approach

(b) It is proper to treat the alpha particle as a particle and not as wave because the distance of closest approach is much larger than and not comparable to its wavelength for the alpha particle for the alpha particle to be treated as a wave

The given parameters are;

The kinetic energy of the alpha particles = 7.70 MeV = 1.23368 × 10⁻¹² J

The distance from the gold nucleus the alpha particles reach = 29.5 fm

(a) The de Broglie wavelength of a particle is given as follows;

[tex]\mathbf{\lambda = \dfrac{h}{p}}[/tex]

Where;

λ = The wavelength

h = Planck's constant = 6.62607004 × 10⁻³⁴ m²·kg/s

p = The momentum of the particle = Mass of an electron, m × Velocity, v

The mass of an alpha particle, m ≈ 6.645 × 10⁻²⁷ kg

Therefore;

[tex]\lambda = \dfrac{h}{m \times v}[/tex]

The kinetic energy of the alpha particle, K.E. = (1/2)·m·v²

∴ v = √(2 × K.E./m)

Therefore;

[tex]\lambda = \dfrac{h}{m \times \sqrt{2 \times \dfrac{K.E.}{m} } } = \dfrac{h}{ \sqrt{2 \times m \times K.E.} }[/tex]

Plugging in the values of the variables gives;

[tex]\lambda = \dfrac{6.62607004 \times 10 ^{-34} }{ \sqrt{2 \times 6.645 \times 10 ^{-27} \times 1.23368 \times 10^{-12} } } \approx 5.175 \times 10^{-15}[/tex]

The de Broglie wavelength of the alpha particle, λ ≈ 5.175 × 10⁻¹⁵ m

The distance of closest approach = 29.5 fm = 29.5 × 10⁻¹⁵ m

Compared to the distance of closest approach, the wavelength of the alpha particle is lesser than the distance of closest approach

(b)  Given that the distance of closest approach is six times larger than the wavelength of the alpha particle, and alpha particle behaving as waves are expected to approach closer to the gold nucleus in the region of their wavelength before deflection, therefore, the larger distance of closest approach is indicative of a charged particle to charged particle interaction, and therefore, particle behavior of alpha particles.

Learn more about de Broglie wavelength, particles and wave behavior of radiation here;

https://brainly.com/question/22471405

https://brainly.com/question/17403491

https://brainly.com/question/15128575

Explanation of the physics involved i the northern lights(aurora borealis) why can't it occur in mire southerns latitudes?

Answers

Answer:

The northern lights come from the interaction of electrically charged particles given off by the Sun surface during solar storms and the Earth's magnetic field which is pointed in the northern to southern poles of the Earth. Therefore, the charged particles that travel through millions of miles from the Sun to the Earth accelerate towards the magnetic poles and appear as the northern (and southern) lights

Boreal is an adjective word for the north or northern regions. In the southern latitudes, in the southern hemisphere, the phenomenon is called aurora australis (australis is the adjective for 'of the south')

Explanation:

Q- Wheel of a running vehicle has which energy?
(a) Vibrational Kinetic energy
(b) Translational Kinetic energy
(c) Rotational Kinetic energy
(d) All of the above​

Answers

Answer:

Rotational kinetic energy

Explanation:

It is caused by circular motion.

Two charges 3*10^-5 C and 5*10^4 C are placed at a distance 10 cm form each other. Find the value of electrostatic force acting between them. a) 13.5 x 10^11N b) 40 x 10^11N c)180 x 10^9N d)13.5 x 10^10 N

Answers

Answer:

13.5 x 10^(11) N

Explanation:

Given :

The magnitude of charge 1 = q1 = 3 × 10^(-5) C

The magnitude of charge 2 = q2 = 5 × 10^(4) C

The distance between charges = d = 10 cm = 0.1 m

To Find :

The magnitude of electrostatic force acting between charges

Solution :

∵ Electrostatic force = F = (k × (q1) x (q2)) / r^(2)

where k = 9 × 10^(9)

i.e    F = 9 × 10^(9) × (3 × 10^(-5) × 5 × 10^(4)) / (0.1)^(2)  

Or, F =  9 × 10^(9) ×  (1.5/0.01)  

∴   F = 9 × 10^(9) × 150

i.e F = 1350 × 10^(9)

or,  Force = F = 1.35 × 10^(12) N

Hence, The magnitude of electrostatic force acting between charges is  1.35 × 10^(12) N => 13.5 x 10^(11)

How can we drop eggs the fewest amount of times without breaking it?​

Answers

Answer:

drop in water

Explanation:

follow me m mm m

Which of the following is a contact force?

A. applied
B. electromagnetic
C. nuclear
D. gravity

Answers

applied force is a contact force

The answer is A- applied

An applied force is a force that is applied to an object by a person or another object. If a person is pushing a desk across the room, then there is an applied force acting upon the object. The applied force is the force exerted on the desk by the person. Gravity Force.

help me with this one​

Answers

Answer:

Explanation:

2. a

3. c

During which step of the scientific method does a scientist determine
whether the hypothesis was supported?
A. Perform the experiment
B. Collect data
C. Draw conclusions
D. Design an experiment
SUBMN
PREVIOUS

Answers

Answer:

A

in performing the experiment the hypothesis is proved wrong or correct prediction , meaning of prediction is guessing,

hypothesis the second stage of scientific method , scientist predict or guess the answer to the problem ,

Experiment the third stage of scientific method

scientist examine the ways

"Perform the experiment" is the step of the scientific method where a scientist determines whether the hypothesis was supported.

What step of the scientific method is used to prove if the hypothesis is accepted or rejected?

In the scientific method, experiments (often with controls and variables) are devised to test hypotheses. In the scientific method, analysis of the results of an experiment will lead to the hypothesis being accepted or rejected.

How do scientists determine whether a hypothesis is correct?

The basic idea of a hypothesis is that there is no predetermined outcome. For a solution to be termed a scientific hypothesis, it has to be an idea that can be supported or refuted through carefully crafted experimentation or observation.

Learn more about the hypothesis here https://brainly.com/question/11555274

#SPJ2

Một dây nhôm dài 10 m khi ở 25 độ C. Biết khi nhiệt độ tăng thêm 1 độ C thì chiều dài 1m dây nhôm sẽ tăng thêm 0,024mm.
a) Tính ăng chiều dài của 1m dây nhom khi nhiệt độ tăn thêm 75 độ C
b) Tính chiều dài dây nhôm ở 75 độ C

Answers

Answer:

??????? what language is this. um A then

Other Questions
Jaqueline used 2.5 pounds of ground beef to make 25 tacos for a family gathering. Peter wants to use the same recipe using 1 pound of ground beef.How many tacos will Peter be able to make? If we increase the temperature of the reaction that occurs in plants to create sugar. What direction does the equilibrium shift....- Products- No change- Reactants- Plants are not capable of this What is the molarity of a solution that contains 0.75 mol Naci in 3.0 L of solution? Select one: O a. 4.0 M O b. 2.3 M O d. 3.8 M O d. 0.25 M Clear my choice A 1.732 g sample of iron is heated in air. It oxidizes to form a product with a mass of 2.205 g.What is the empirical formula of the product? 1. WHAT IS THE "BASIC SPEED LAW"?A. Never drive faster than is safe for current conditionsB. Never drive faster than the posted speed limitsC. Keep up with the flow of traffic Pls someone help me ASAP Dom Pedro primeiro deixa o governo Graciella is a teacher of 4-year-old in a state preschool. Henry is a robust 4-year-old boy who just started school a few weeks ago. It appears that he is trying to intimidate Marcus and Leon when they go out to play. Henry is trying to make up rules and coerce the other boys into playing what he wants to play.How should Graciella handle this potential bullying? What direction should she take? A sound frequency 100Hz and wavelength 3.34m is travelling through air, calculate the Velocity of sound in air. Read "a western view of the Byzantine Empire" (textbook page 325)Was Lludprand of Cremona a skilled diplomat? How accurate does his estimate ofConstantine VII appear to be? Why? Does Lludprand exhibit any signs of western inferiority when he appears before the eastern emperor? What does his noteabout the carzimasia reveal about his perception of the emperor?2. Read "Opposing Viewpoints: Causes of the Black Death" (textbook page 331). How did Fourteenth Century Europeans explain the causes of the plague? Howmight one explain the differences in the three accounts and what do they tell us about the level of scientific knowledge at that time? How did the plague affectthe social and economic system in Western Europe and why might this be seen as an important transition from the late Middle Ages to something we candescribe as "early modern"? What unit of measurement is used for DIMM read and write times? HELP ASAP I WILL GIVE BRAINLISTThe picture shows two containers filled with a gas, both initially at room temperature.Which statement is correct? The gas particles in both containers have the same average kinetic energy because they have equal number of particles.The gas particles in both containers have the same average kinetic energy because they have the same volume.The average kinetic energy of the gas particles is greater in container A because it has a lower temperature.The average kinetic energy of the gas particles is greater in container B because its particles move faster. i really need help can anyone help!? What does this mean? The treadmill completes this transformation by allowing travel to be measured entirely by time, bodily exertion, and mechanical motion. Spaceas landscape, terrain, spectacle, experiencehas vanished. Which of the following best describes gothic literature?O llterature that explores the appreciation of the individual over society as a wholeliterature that focuses on the natural world as a force that controls human fate and destinyliterature that emphasizes science, reason, and order over emotion, religion, and spiritualityIiterature that explores grotesque characters and eerle, violent occurrences in dreary settings sin 0= 20/29. Find tan 0. If patient's current ledger balance is $238.00, the patient's fees for today are $117 and the patient paid $100.00 today, what is the patient's new balance: Your instructor will assign you a client profile that may contain: a special diet, specific preferences/recipes to follow and/or specific religious requirements. Follow this profile when completing your assignment. 1. Planning Phase (20 marks) a. With your group, plan and prepare a nutritious, balanced, flavourful, and appealing meal, based upon your assigned client profile. b. Be sure to keep records/notes of work done in the planning stage, these must be submitted to your instructor when you have completed the assignment. c. Use a variety of sources such as cookbooks, recipes, pamphlets, etc., and be sure to list them on your assignment. Include a copy of the recipe you have chosen and be prepared to submit an alternate recipe that could be used to replace one of the dishes you have selected. Be sure your recipes are clear and legible, follow a logical sequence, and are complete. 2. Presentation Phase (20 marks) In a class presentation, you will be asked to: a. Present your meal, keeping in mind the following criteria: i. Attractiveness (including table setting) ii. Adhering to client's wishes contained in the client profile b. Describe the process involved in preparation including: i. Techniques ii. Special handling iii. Timing c. Briefly present your alternate recipe in discussion form: it is not necessary to actually prepare this dish. A copy of this recipe should be included in the material you will submit to your instructor. d. Allow time for questions from your audience. NACC 2017 V.4 Section IV. Module 6. Household Management (c) 63 divided by 3 = 21 , Show how you use this to work out 0.63 divided by 0.3. What is the difference between independent and dependent demand. Group of answer choices independent iemand is based on market forces while Dependent demand is based on production schedule dependent demand is what determines independent demand independent demand is based on dependent demand dependent demand is based on sales while independent demand is based on management decisions