Answer:
carbon aroms are 5
hydrogen atoms are 20
What is the expansion for the chemical symbol of tungsten?.
At which position is the northern hemisphere experiencing winter?
The image includes the position and tilt of Earth in its orbit around the sun. Earth is tilted away from the sun in position A. In position B, the sun shines evenly on Earth from pole to pole. Earth is tilted toward the sun in position C. In position D, the sun shines evenly on Earth from pole to pole.
Public Domain
Point A
Point B
Point C
Point D
Answer:
Point A
Explanation:
The Northern Hemisphere is furthest away from the sun in position A. Therefore the sunlight takes longer to reach the Earth which results in the Northern Hemisphere experiencing winter.
Point A represents the position where the northern hemisphere is experiencing winter.
This is because Earth's axis is tilted away from the sun at this point, causing the northern hemisphere to receive less direct sunlight and shorter days. As a result, the rays from the sun are spread over a larger area, making the sunlight less intense and leading to colder temperatures during this time of the year in the northern hemisphere.
In contrast, at Point C, the northern hemisphere experiences summer. This is when the Earth's axis is tilted towards the sun, causing the northern hemisphere to receive more direct sunlight and longer days, resulting in warmer temperatures.
Points B and D are the equinox positions when the sun shines evenly on Earth from pole to pole, and both hemispheres experience approximately equal day and night lengths. These are the times of the year when transitions between seasons occur.
To learn more about northern hemisphere here
https://brainly.com/question/30889621
#SPJ2
3. Why do some reactions occur Nturally, and others do not?
Answer:
depends
Explanation:
because some are caused by different variables
102. What is the Pauli exclusion principle? What is Hund's rule?
Pauli Exclusion Principle is about quantum numbers of an atom. Hund rule is about how electrons are filled to the orbitals of an atom.
Please Help I need an explanation on how to do this
Balanced equation(That should be NaClO_3)
[tex]\\ \rm\Rrightarrow Cl_2+2NaOH\longrightarrow NaCl+NaClO_3+H_2O[/tex]
Remember that it's a ionic equation not general equation
So
We have to balance it accordingly
Answer:
Balanced equation(That should be NaClO_3)
\begin{gathered}\\ \rm\Rrightarrow Cl_2+2NaOH\longrightarrow NaCl+NaClO_3+H_2O\end{gathered}⇛Cl2+2NaOH⟶NaCl+NaClO3+H2O
Remember that it's a ionic equation not general equation
So
We have to balance it accordingly
formation of water: 2H2 + 1 O2 --> 2H20
How many moles of O2 will I need to produce 15 moles of H2O?
Answer don’t delete comment or I’ll report
Answer:
n=15 moles H2O
1:2
x:15
x=7.5 moles of O2
How does the number of molecules in 1 mol of oxygen compare with the number of molecules in 1 mol of nitrogen?
O 1 mol of oxygen has fewer molecules.
O 1 mol of oxygen has more molecules.
O Each sample has the same number of molecules.
O The molecules cannot be compared without knowing the mass.
Answer:
The molecules cannot be compared without knowing the mass.
Molly inflates a beach ball to a volume of 8 liters in her air-conditioned house where
the temperature is 19°C. Later that day, Molly takes the beach ball to the beach. The
temperature at the beach was 33°C, and the air pressure at the beach is the same as
it was at the house.
What will happen to Molly's beach ball when she is at the beach?
The temperature at the air-conditioned house is 19° C. The temperature increases to 33° C in the beach. Molly's beach ball's volume will increase with increase in temperature.
What is the Charles law?Charles' law states that volume of gas increase with an increase in the temperature of the gas.
When pressure remain constant, if temperature increases, the volume of the ball will also increase.
Thus, Molly's beach ball's volume will increase with increase in temperature.
Learn more about Charles law
https://brainly.com/question/16927784
#SPJ1
What will the pressure be if 89.9 moles of argon are contained in a 12.0 L cylinder that is pressurized at a temperature of 300 K?
Done!
What information does the percent composition of an atom in a molecule give?
A. The total number of atoms of that element in a molecule
B. The total mass that element contributes to a molecule
C. The relative amount of mass an atom contributes to a molecule
D. The relative number of atoms one element contributes to a molecule
Answer:
C
Explanation:
The percent composition of an atom in a molecule gives information regarding the relative amount of mass an atom contributes to a molecule.
Find the final temperature when 10 grams of aluminum at 130 c mixes with 200 grams of water at 25 c. assume no water is lost as water vapor. specific heat values (c) for aluminum= 0.901 j/g c and water 4.18 j/g c
Answer:
About 26.12 C°
Explanation:
Following q = mc∆t, assuming q is the same
(10g)(130 - T)(0.901j/g*c) = (200.0g)(T - 25)(4.18j/g*c)
T = 26.12
Classify: Heat that is transferred in a circular motion with warm particles rising and cool
particles sinking in a gas and liquid is called____
Convection
Conduction
Radiation
hello bro please set instar
A gas cylinder contains exactly 1 mole of oxygen gas (o2). how many molecules of oxygen are in the cylinder? 4.01 × 1022 molecules 6.02 × 1023 molecules 9.03 × 1024 molecules 2.89 × 1026 molecules
The number of molecules of oxygen in the cylinder would be 6.022 x [tex]10^{23}[/tex]
Number of molecules of gasesAccording to Avogadro, 1 mole of any substance contains 6.022 x [tex]10^{23}[/tex] molecules.
In this case, there is 1 mole of oxygen gas in the cylinder. Thus, following the established rule by Avogadro, there would be 6.022 x [tex]10^{23}[/tex] molecules of oxygen in the cylinder.
More on Avogadro's number can be found here:https://brainly.com/question/11907018
#SPJ4
Answer:
6.02 x10^23
Explanation:
i did the test
formation of water: 2H2 + 1 O2 --> 2H2O
How many moles of H2O can be produced from 35 grams of O2?
Answer:
2.2 moles H2O
Explanation:
[tex]35g O_2 \mbox{ \cdot }\frac{1mol}{32g/mol} \mbox{ \cdot }\frac{2mol H_2O}{1mol O_2}= 2.1875[/tex], which rounds to about 2.2
Where are taste buds located?
the tongue and roof of mouth
the roof of the mouth only
the roof and side of mouth
the tongue only
the tongue and roof of the mouth
would be the answer
Answer:
The tounge and roof of the mouthExplanation:
Stay safe, stay healthy and blessed.Have a good day !Thank you !#Jennifer
? Question
Given:
H₂ + Br₂ → 2HBr
Bond
Bond Energy
(kJ/mol
H-H
432
Br-Br
190
H-Br
362
Calculate the enthalpy change when hydrogen reacts with bromine.
Type the correct answer in the box. Express the answer to three significant figures e.
ΔΗ =
kj
Answer:-102
Explanation:The equation shows that 1 mole of H-H bonds and 1 mole of Br/Br vines are broken from 2 miles of H-Br bonds
Answer: -102
Explanation:
What is one element that is found in the human body, air, or the universe ?
Answer:
Hydrogen
Explanation:
It is pretty much present everywhere :)
Hurry please what will scientists do to solve invasive species? How will it problem solve? Will it be successful or effective?
Answer:
scientists could import or encourage breeding of a natural predator of the invasive species. it will be successful although may be a problem over time as the predator may become invasive.
Explanation:
this will greatly lower the amount of the invasive species as they are being consumed by an introduced predator, although you do risk making the predator an invasive species over time.
A piece of metal weighing 0.035 kg was submerged in a graduated cylinder containing water. The water level rose from 2.0 mL to 9.0 mL. What is the density in g/mL of the metal
Taking into account the definition of density, the density of the metal is 5 [tex]\frac{g}{mL}[/tex].
What is densityDensity is defined as the property that matter, whether solid, liquid or gas, has to compress into a given space.
In other words, density is a quantity that allows us to measure the amount of mass in a certain volume of a substance.
Then, the expression for the calculation of density is the quotient between the mass of a body and the volume it occupies:
[tex]density=\frac{mass}{volume}[/tex]
From this expression it can be deduced that density is inversely proportional to volume: the smaller the volume occupied by a given mass, the higher the density.
This caseIn this case, the increase in the volume of water in the cylinder is due to the volume of the metal. This means that the volume of the metal can be calculated by taking into account the volume occupied by the water + the metal and the volume occupied by the water alone in the cylinder.
Then, you know that:
Mass= 0.035 kg= 35 g (being 1 kg=1000 g)Volume= Volumen water + the metal - Volume water= 9 mL - 2 mL= 7 mLReplacing in the definition of density:
[tex]density=\frac{35 g}{7 mL}[/tex]
Solving:
density= 5 [tex]\frac{g}{mL}[/tex]
In summary, the density of the metal is 5 [tex]\frac{g}{mL}[/tex].
Learn more about density:
brainly.com/question/952755
brainly.com/question/1462554
#SPJ1
What is the best reason for using iron filings (shreds) instead of an iron nail in a chemical reaction?
a) to decrease the amount catalyst during the reaction
b) to increase the molecular structure during the reactions
c) to decrease the rate of reaction
d) to increase the surface area of the reaction
The best reason for using iron filings (shreds) instead of an iron nail in a chemical reaction is to increase the surface area of the reaction.
What is rate of chemical reaction?Rate chemical reaction is the speed at the which chemical compounds react which each other. Some factors can speed up the rate of chemical reaction and they include;
ConcentrationTemperatureSurface area, etc.A large surface area provides enough medium for chemical reaction to occur and hence speeds up the rate of chemical reaction.
Thus, the best reason for using iron filings (shreds) instead of an iron nail in a chemical reaction is to increase the surface area of the reaction.
Learn more about rate of reaction here: https://brainly.com/question/24795637
#SPJ1
At which temperature does water have particles with a greater average kinetic energy than water with a temperature of 30°C?
77°F
95°F
280K
300K
Answer:
95F
Explanation:
First we convert these temperatures into °C:
77°F = 25°C
95°F = 35°C
280K = 6.85°C
300K = 26.85°C
When temperature increases, water molecules have a greater average kinetic energy ans are more likely to collide with each other.
Out of the 4 temperatures, only 95°F (35°C) is of a higher temperature than 30°C. Hence 95°F is the answer.
All stoichiometry calculations involve what important step?
metric fraction
molar mass fraction
molecules fraction
mole ratio fraction
DONE
Answer:
Mole Ratio Fraction
Explanation:
That's the answer.......
Answer:
DExplanation:
Mole Ratio Fraction
How much energy is released if a sample loses 0.001 kg mass through radioactive decay?
Explanation:
because the energy it can't be calculated
PLS, I NEED HELP!!!!
Next, you will gradually apply heat to the sugar and observe the effects. Your goal is to identify the point at which sugar begins to melt. To get started, follow these steps. Then, answer the question that follows.
Pour 1 tablespoon of sugar into a cooking pan. Spread it out across the surface of the pan. Place the pan on a stove.
Because all stoves are different, you’ll need to identify your low, medium, and high heat settings before proceeding to step 3.
Use the method below to gradually heat the pan until you see the sugar begin to melt. Once the sugar melts, note how much time has elapsed and the final heat setting. If at any point the pan begins to smoke, immediately turn off the heat source and remove the pan from the heat. Heat the pan for these times and temperatures, stopping when the sugar begins to melt:
5 minutes on low heat
5 minutes on medium-low heat
5 minutes on medium heat
5 minutes on medium-high heat
5 minutes on high heat
When the sugar melts, turn off the stove and remove the pan from the heat. Do not touch the hot pan except by its handle. Use hot pads or oven mitts if the pan’s handle isn’t insulated. Let the pan sit off the heat on a heat-resistant surface until it cools.
Approximately how many minutes did it take for the sugar to melt? What was the final heat setting?
Repeat the process given in part D using salt instead of sugar. Did the salt melt? If so, approximately how many minutes did it take for the salt to melt?
When a high amount of heat is supplied, the sugar melts faster than when a low amount of heat is supplied.
What is melting?The term melting has to do with the breakdown of the bonds that hold the molecules of a substance together. Melting occurs when heat is applied continously to a body.
Now, the time taken for the sugar to melt depends on the amount of heat supplied. In other words, when a high amount of heat is supplied, the sugar melts faster than when a low amount of heat is supplied.
Learn more about melting:https://brainly.com/question/15873508
#SPJ1
When a high amount of heat is supplied, the sugar melts faster than when a low amount of heat is supplied. low heat makes the sugar take awhile to melt. High heat was the final heat setting. I took about 8-10 minutes.
How is Hess's law used to calculate the enthalpy of a reaction?
A. The enthalpy is obtained from the difference in final and initial reactions in a path.
B. Enthalpies from similar equations are substituted for unknown reaction enthalpies. C. The final equation in a reaction path provides the enthalpy for the desired reaction.
D. The desired enthalpy is obtained through adding intermediate reactions together.
Considering the Hess's Law, the desired enthalpy is obtained through adding intermediate reactions together. (option D)
Hess's LawHess's law, also called Law can also be called Law of additivity of the enthalpies of reaction, it is a useful method when it is not possible to calculate the enthalpies of reaction from the enthalpies of formation, or in reactions in which the reaction enthalpy cannot be determined experimentally because it is very slow or very explosive.
Hess's law states that when reactants are converted to products, the enthalpy change is the same whether the reaction takes place in one step or in a series of steps.
In this way, Hess's Law determines that when a chemical reaction can be expressed as an algebraic sum of other reactions, its reaction enthalpy is equal to the sum of the enthalpies of the partial reactions. In this way, it allows thermochemical equations to be treated as algebraic equations, and can be added, subtracted, or multiplied by a number to find the desired thermochemical equation.
SummaryHess's Law states that the sum of the ∆H of each stage of the reaction will give us a value equal to the ∆H of the reaction when it occurs in a single stage.
That is, the desired enthalpy is obtained through adding intermediate reactions together. (option D)
Learn more about Hess'Law:
brainly.com/question/5976752
brainly.com/question/13707449
brainly.com/question/13707449
brainly.com/question/6263007
brainly.com/question/14641878
brainly.com/question/2912965
#SPJ1
17. Explain How is a change in oxidation number related to the process of oxidation and reduction?
Answer:
Explanation:
A change in oxidation number represents a transfer of electrons between atoms/ions. This is what happens during oxidation and reductions, where electrons are gained and lost (respectively).
What is the compound N₂O3 called?
Answer:
Explanation:
Dinitrogen trioxide is a nitrogen oxide. Nitrogen trioxide appears as a blue liquid with a sharp, unpleasant chemical odor.
Description: Dinitrogen trioxide is a nitrogen oxide.ChEBINitrogen trioxide appears as ...
Synonyms: Dinitrogen trioxideNITROGEN TRIOXIDENitrogen oxide (N2O3)10544-7...
Molecular Formula: N2O3
Molecular Weight: 76.012 g/mol
Answer:
It is called Dinitrogen trioxide. Hope this helps!
How can objects all be the same size but have a different mass? *help quick*
Answer:
All objects can have the same size but have a different mass!
This is true, although it sounds fake. This is one example, there is a Neutron star, and Neutron stars are as big as a city, but they have a mass which is hundreds of times greater than our sun's mass. Because of them having so much mass, they are also having so much gravitational energy, which makes them also have gravity. They're so small, but have so much mass that they can do much. Even a drop of a neutron star can punch open the earth! It's true, so yes, it is possible for objects the SAME size to be having different masses according to that example.
But let's look on how they can have different mass.
They can have different masses becase of different densities. Put a iron ball inside water, and put an apple as close to the iron ball's side, what happens? The apple floats, becuase the apple's mass is less than the water, and the iron ball's mass is MORE than the water. So, because the iron ball is denser than the apple, that's why, it has more mass than the apple. The apple isn't much dense, it isn't as dense as water or the iron ball. But the iron ball is much more denser than the water. So because of the different material densities of the material, that's why it can have different masses.
Remember to Remember those 2 examples I gave you... (neutron star vs sun, iron ball vs apple on water)
20 Infer Check the box to show which would tell you for sure if you had a sample of real gold.
Color of your sample. Yes No
What happens when you strike your sample with a hammer.
The location where your sample was found.
Answer:
C but read the limitation
Explanation:
Gold sample
Color wouldn't tell you much. In fact it may fool you. Fool's Gold is the same color as gold.
Gold is very malleable. That's what hitting gold with a hammer will do. It tends to shape the gold without destroying it into lots of pieces. A lot of yellow things have that property.
If only it was that simply. Yes if you are sure there is gold in that location. You have to pick this answer, because the other 2 don't work. So this is possible, but not the best way. The best way is to subject the sample to chemical treatment. If you are left with a yellow sample, then you could make the case for it being gold.
Predict and write the formulas for the two products of the reaction of aluminum metal al(s) with the copper(ii) chloride.
Answer:
Cu (s) and AlCl₃ (s)
Explanation:
This reaction can be classified as a single-displacement reaction, aka. a single-replacement reaction. These reactions involve one element swapping out another element in a compound. In this reaction, aluminum is taking the place of copper (ii) in the copper (ii) chloride compound. Aluminum takes the place of copper (ii) specifically because aluminum is more likely form a cation than anion. Copper (ii) serves as a cation in the compound.
Al (s) + CuCl₂ (s) --> Cu (s) + AlCl₃ (s)
The final products are copper (ii) metal and aluminum chloride. The metal of copper (ii) is produced instead of the cation in order to maintain the neutral charge balance of the reaction. The chorine has a subscript of 3 because aluminum usually forms cations of a +3 charge while chlorines form anions with a -1 charge.
The balanced equation is:
2 Al (s) + 3 CuCl₂ (s) --> 3 Cu (s) + 2 AlCl₃ (s)
