5.4 L x A mL/ B L= C mL

Answer:The five major types of species interactions, summarized in Figure 10, are competition, predation, parasitism, mutualism, and commensalism.

Explanation:

Answer:

1.14kg of chalcopyrite

Explanation:

In 1 mole of chalcopyrite, CuFeS₂, there is 1 mole of Cu. Thus, to solve this question we need to convert the mass of pure Cu to moles using molar mass (Cu = 63.546g/mol). Then, the moles of Cu are equal to moles of chalcopyrite that must be converted to grams and then to kg (CuFeS₂: 183.54g/mol)

Moles Cu:

395g Cu * (1mol / 63.546g) = 6.216 moles Cu = 6.216 moles CuFeS₂

Mass chalcopyirite:

6.216 moles CuFeS₂ * (183.54g/mol) = 1140.9g

In kilograms:

1140.9g * (1kg / 1000g) =

Answer: (2) releases 2260 J/g of heat energy

Explanation:

Latent heat of vaporization is the amount of heat required to convert 1 mole of liquid to gas at atmospheric pressure.

Latent heat of condensation is energy released when 1 mole of  vapor condenses to form liquid droplets.

The temperature does not change during this process, so heat released goes into changing the state of the substance, thus it is called latent which means hidden. The energy released in this process is same in magnitude as latent heat of vaporization. The heat of condensation of water vapour is about 2,260 J/g.

Phase transition refers to the changes in the states of matter between gas, liquids, and solids.

The correct answer is:

Option 2. releases 2260 J/g of heat energy

The process can be explained as:

1. Condensation is the process of conversion of water vapor into the liquid state.

2. Latent heat of vaporization is defined as the amount of heat required for 1 mole of liquid to convert into a gaseous phase at atmospheric pressure.

3. The change in the temperature does not occur during the condensation, and the heat required for the phase transition is latent heat. The heat of condensation of water vapor is 2,260 J/g.

Thus, the correct answer is Option 2.

To know more about condensation, refer to the following link:

https://brainly.com/question/15563071

Given :

Mass of Ba(OH)₂ , m = 35.5 g.

Volume of mixture, V = 325 mL = 0.325 L.

To Find :

The molarity of a solution.

Solution :

We know, molarity of a solution is given by :

[tex]M = \dfrac{Given \ Weight}{Molecular\ Mass\times Volume( L ) }[/tex]

We know, molecular mass of Ba(OH)₂ is given by :

M.M. = 171 g/mol

Putting all these values in given equation, we get :

[tex]M = \dfrac{35.5}{171\times 0.325}\ M\\\\M = 0.64\ M[/tex]

Hence, this is the required solution.

Answer: Sound waves

The wave pattern that i observed in sound waves are longitudinal wave patterns.

The mathematical graph function looks like is a sine function graph. The pattern that i observed in the amplitude of the wave is longitudinal wave pattern

When you increase the frequency of the sound waves the wave moves faster but the wavelength becomes shorter. The higher the frequency results in higher the pitch of the sound.

If you increase the frequency the velocity of the sound wave remains constant for all valuses of frequencies.

i am currently completing this assigment. i am not usre if the answer are correct but i tried my best  

I also got this from course hero it's your choise to put the one you want.

The wave pattern is identical to the pattern of the water. The graph is the same as the water except the wave height isn’t as big. Increasing the frequency increases the wavelength. Increasing the frequency also increases the velocity of the waves by a lot. With two sources the waves pass through each other. The wave pattern with a single slit barrier is the same as the water pattern.

Explanation:

Answer: Sound waves

The wave pattern that i observed in sound waves are longitudinal wave patterns.

The mathematical graph function looks like is a sine function graph. The pattern that i observed in the amplitude of the wave is longitudinal wave pattern

When you increase the frequency of the sound waves the wave moves faster but the wavelength becomes shorter. The higher the frequency results in higher the pitch of the sound.

If you increase the frequency the velocity of the sound wave remains constant for all valuses of frequencies.

i am currently completing this assigment. i am not usre if the answer are correct but i tried my best  

I also got this from course hero it's your choise to put the one you want.

The wave pattern is identical to the pattern of the water. The graph is the same as the water except the wave height isn’t as big. Increasing the frequency increases the wavelength. Increasing the frequency also increases the velocity of the waves by a lot. With two sources the waves pass through each other. The wave pattern with a single slit barrier is the same as the water pattern.

Explanation:

Answer:

1:3

Explanation:

nitrogen and hydrogen combine qt high pressure and temperature to form ammonia gas.this method is used to prepare ammonia industrially and the process is called haber's process.

the balanced equation is given as:

N2+3H2=>2NH3

we can see that 1 mole of nitrogen combines with 3 moles of hydrogen to produce 2 moles of ammonia.

hence ratio of nitrogen and hydrogen molecules should be 1:3 for reactants to get used up completely.

I hope it's helpful!

Answer:

that the poem needs to be finished heh pog

Explanation:

Answer:

Where is the poem?

Explanation:

Answer:

3.85 ×10²³ Na⁺ ions

Explanation:

Given data:

Mass of Na₂SO₄ = 45.6 g

Number of ions of Na = ?

Solution:

Number of moles of Na₂SO₄:

Number of moles = mass/ molar mass

Number of moles = 45.6 g/ 142.04 g/mol

Number of moles = 0.32 mol

1 mole of Na₂SO₄ contain 2 moles of Na⁺ ion.

0.32 mol × 2=  0.64  moles of Na⁺ ion

1 mole contain 6.022×10²³ Na⁺ ions

0.64 mol × 6.022×10²³ Na⁺ ions / 1 mol

3.85 ×10²³ Na⁺ ions

Answer:

Explanation:

1) Given data:

Number of moles of lead = 4.3×10⁻³ mol

Mass of lead = ?

Solution:

Mass = number of moles × molar mass

Molar mass of lead = 207.2 g/mol

Mass = 4.3×10⁻³ mol × 207.2 g/mol

Mass =  890.96 g

2) Given data:

Number of atoms of antimony = 3.8×10²² atoms

Mass of antimony = ?

Solution:

1 mole contain 6.022 ×10²³ atoms

3.8×10²² atoms × 1 mol / 6.022 ×10²³ atoms

0.63×10⁻¹ mol

0.063 mol

Mass = number of moles × molar mass

Molar mass of lead = 121.76 g/mol

Mass = 0.063 mol ×  121.76 g/mol

Mass =  7.67 g

3) Given data:

Mass of tungsten = 15.5 Kg (15.5 kg × 1000 g/ 1kg = 15500 g)

Number of atoms = ?

Solution:

Number of moles of tungsten:

Number of moles = mass/molar mass

Number of moles = 15500 g / 183.84 g/mol

Number of moles = 84.3 mol

1 mole contain 6.022 ×10²³ atoms

84.3 mol  × 6.022 ×10²³ atoms / 1mol

507.65 ×10²³ atoms

Answer:

Greek's Model used stars while Ptolemy did not use stars.

Explanation:

The Greek model had stars as part of the system and they revolved around the Earth. Ptolemy's model did not include the stars, but it did include the moons that revolves around the planets.

Answer:

I think its b or c

Explanation:

hope this helps I mainly think b

Answer:

d = 43.5 g/cm³

Explanation:

Given data:

Mass of magnesium cube = 217.501 g

Volume of magnesium cube = 5.00 cm³

Density of magnesium cube = ?

Solution:

Formula:

d = m/v

d = density

m = mass

v = volume

by putting values,

d = 217.501 g/ 5.00 cm³

d = 43.5 g/cm³

Answer:

The equipments you should have ready to start the crucible experiment includes: safety goggles, crucible with lid, crucible tong, ring support with clay triangle, Bunsen burner and heat resistant tile.

Explanation:

Crucible is an equipment in the laboratory which is suitable for heating a sample to extreme heat over a flame, Modern laboratory crucible are made up of graphite- based composite materials for achievement of higher performance. Because extreme heat is involved, you should locate the correct labware for the experiment, including the equipment to safely handle and support the crucible. These equipments includes:

--> Safety goggles: Because you will work with chemical it is advisable to use a safety goggles which protects the eyes from dangerous floating chemical aerosol.

--> crucible with lid: This is the main apparatus with the lid (cover) which is used to cover the crucible to prevent spilling of the boiling chemical.

--> Crucible tong: These are scissors like tools used to grasp hot crucible.

--> Ring support with clay triangle: the clay triangle is used to hold crucible when they are being heated. They usually sit on a ring stand.

--> Bunsen burner: Produces a single open gas flame which can be used for heating.

With the safety equipments listed above, you can carry out experiment using the crucible. These equipments helps minimise laboratory hazard that may occur should Incase it's not available.

Safety goggles, crucible with lid, crucible tong, ring support with clay triangle, Bunsen burner and heat resistant tiles equipment should be ready to start the crucible experiment.

Crucible is having a cup like structure and formed by the mixture of graphite and porcelain, and these two are having very high melting or boiling point; that's why crucible is used to heat any sample at high temperature.

Before doing any experiment with crucible you have to carry:

Equipment we should ready to start crucible experiment are safety goggles, crucible with lid, crucible tong, ring support with clay triangle, Bunsen burner and heat resistant tiles.

To know more about crucible, visit the below link:

https://brainly.com/question/5700548

Answer:

I believe its false

Explanation:

a carrying capacity is the maximum amount of living things that can be held in a single container

Answer:

Populations vary in their capacity to grow. The maximum rate at which a population can increase when resources are unlimited and environmental conditions are ideal is termed the population's biotic potential. Each species will have a different biotic potential due to variations in

the species' reproductive span (how long an individual is capable of reproducing)

the frequency of reproduction (how often an individual can reproduce)

"litter size" (how many offspring are born each time)

survival rate (how many offspring survive to reproductive age)

There are always limits to population growth in nature. Populations cannot grow exponentially indefinitely. Exploding populations always reach a size limit imposed by the shortage of one or more factors such as water, space, and nutrients or by adverse conditions such as disease, drought and temperature extremes. The factors which act jointly to limit a population's growth are termed the environmental resistance. The interplay of biotic potential and density-dependent environmental resistance keeps a population in balance.

Answer:

Choice C as my opinion

Explanation:

solidification of volcanic lava has to do with changes in earth and the thermal structure that's just a point not sure though

hope I was helpful though thank you

Answer:

c) solidification of volcanic lava

Explanation:

heat is being lost to the outside surroundings "exo" thermic

Answer:

t = 37.1 s

Explanation:

The equation for the reaction is given as;

                  2 N2O5(g)  --> 4 NO2 + O2

Initial:          0.110                  -             -

change:        -2x                  +4x        +x

Final:          0.110 - 2x           +4x        +x

But final = 0.150atm;

0.110 - 2x    +  4x   +  x = 0.150 atm

3x = 0.150 - 0.110

x = 0.0133 atm

Pressure in reactant side;

0.110 - 2x

0.110 - 2 (0.0133) = 0.0834 atm

The integral rate law expression is given as;

ln ( [A] / [Ao] ) = -kt

k =  rate constant = 7.48*10^-3*s-1

ln (0.0834/0.11) = (7.48*10^-3)  t

upon solving, t = 37.1 s

In this exercise we have to use the knowledge of chemistry to calculate the necessary time that the pressure can hold the system, in this way we can say that this time corresponds to:

[tex]t = 37.1 s[/tex]

First we have to use the reaction equation given as:

[tex]2 N_2O_5(g) \rightarrow 4 NO_2 + O_2[/tex]

This equation can be rewritten in terms of pressure, so it will be;              

[tex]0.110 - 2X + 4X + X = 0.150 atm\\3X = 0.150 - 0.110\\X = 0.0133 atm[/tex]

Pressure in reactant side, will be:

[tex]0.110 - 2X \rightarrow 0.110 - 2 (0.0133) = 0.0834 atm[/tex]

The integral rate law expression is given as, knowing that the rate constant is  [tex]7.48*10^{-3}*s^{-1}[/tex]

[tex]\int\limits^{0.0834}_{0.11} {(7.48*10^{-3}) t} \, dt = t = 37.1 s[/tex]

See more about chemistry at brainly.com/question/1882888

Answer:what is nacho3???

Explanation:

Answer:

59.4%

Explanation:

CuSO4(aq) + 2NaOH(aq) -----> Cu(OH)2(aq) + Na2SO4 (aq)

Ratio of molesCuSO4 to NaOH is 1:2

To determine the limiting reagent;

For CuSO4

Number of moles= 638.44g/160 = 4 moles

1 mole of CuSO4 yields 1 mole of Cu(OH)2

4 moles of CuSO4 also yields 4 moles of Cu(OH)2

For NaOH

Number of moles= 240g/40g/mol= 6 moles

2 moles of NaOH yields 1 mole of Cu(OH)2

6 moles of NaOH yields 6× 1/2 = 3 moles of Cu(OH)2

Hence NaOH is the limiting reactant.

Hence mass of Cu(OH)2 = 3 × 98 g/mol

= 294 g

% yield = actual yield/ theoretical yield × 100

% yield= 174.6 /294 × 100/1

% yield = 59.4%

The percent yield is   59.4%

Firstly write the balanced chemical equation:

CuSO₄(aq) + 2NaOH(aq) → Cu(OH)₂(aq) + Na₂SO₄ (aq)

Ratio of moles for CuSO₄ to NaOH is 1:2

To determine the limiting reagent:

For CuSO₄:

[tex]\text{Number of moles}= \frac{ 638.44g}{160}= 4 \text{moles}[/tex]

1 mole of CuSO₄ produces 1 mole of Cu(OH)₂

4 moles of CuSO₄ will produce 4 moles of Cu(OH)₂

For NaOH:

[tex]\text{Number of moles}= \frac{240g}{40g/mol} = 6 \text{moles}[/tex]

2 moles of NaOH yields 1 mole of Cu(OH)₂

6 moles of NaOH yields [tex]6*\frac{1}{2} = 3[/tex] moles of Cu(OH)₂

Hence, NaOH is the limiting reactant.

Therefore, mass of Cu(OH)₂ = [tex]3 * 98 g/mol= 294 g[/tex]

% yield = actual yield/ theoretical yield × 100

% yield= [tex]\frac{174.6}{294}* 100[/tex]

% yield = 59.4%

Learn more:

brainly.com/question/2442404

Answer:

Almost all corn oil is expeller-pressed

Explanation:

then solvent-extracted using hexane or 2-methylpentane (isohexane). The solvent is evaporated from the corn oil, recovered, and re-used. After extraction, the corn oil is then refined by degumming and/or alkali treatment, both of which remove phosphatides.Oct 16, 2020

Answer:

go to hellfhshahahahahahahahahaha  aha

Explahhhhahah

Answer: For the balanced redox equation, you should add the half reactions.

Like this.

Explanation:

Was it helpful? Or do you need different answer?

Answer:

20 kg

Explanation:

From the question given above, the following data were obtained:

Volume (V) of substance = 2.50 L

Density (D) of substance = 8.00 g/mL

Mass (m) of substance =?

Next, we shall convert 2.50 L to millilitres (mL). This can be obtained as follow:

1 L = 1000 mL

Therefore,

2.50 L = 2.50 L × 1000 mL / 1 L

2.50 L = 2500 mL

Thus, 2.50 L is equivalent to 2500 mL.

Next, we shall determine the mass of the substance. This can be obtained as follow:

Volume (V) of substance = 2500 mL

Density (D) of substance = 8.00 g/mL

Mass (m) of substance =?

D = m / V

8 = m / 2500

Cross multiply

m = 8 × 2500

m = 20000 g

The mass of the substance is 20000 g.

Finally, we shall convert 20000 g to Kg

This can be obtained as follow:

1000 g = 1 kg

Therefore,

20000 g = 20000 g × 1 kg / 1000 g

20000 g = 20 kg

Therefore, the mass of the substance is 20 Kg

Answer:

11

Explanation:

Moles of KOH = [tex]10^{-2}[/tex]

Volume of water = 10 liters

Concentration of KOH is given by

[tex][KOH]=\dfrac{10^{-2}}{10}\\\Rightarrow [KOH]=10^{-3}\ \text{M}[/tex]

[tex][KOH][/tex] is strong base so we have the following relation

[tex][KOH]=[OH^{-}]=10^{-3}\ \text{M}[/tex]

[tex]pOH=-\log [OH^{-}]=-\log10^{-3}[/tex]

[tex]\Rightarrow pH=14-3=11[/tex]

So, pH of the solution is 11

Answer:

Mass =   253.4 g

Explanation:

Given data:

Mass of oxygen required = ?

Mass of hydrogen available = 32.0 g

Solution:

Chemical equation:

2H₂ + O₂     →       2H₂O

Number of moles of hydrogen:

Number of moles = mass/molar mass

Number of moles = 32.0 g/ 2.02 g/mol

Number of moles = 15.84 mol

Now we will compare the moles of hydrogen and oxygen:

                  H₂         :           O₂

                   2          :           1

              15.84        :         1/2×15.8 = 7.92 mol

Mass of oxygen required:

Mass = number of moles × molar mass

Mass = 7.92 mol × 32.00 g/mol

Mass =   253.4 g

Answer:

2. Energy

Explanation:

Answer:

a

Explanation:

it is an electrolyte because of its strong polar chemical bond

Answer:

[tex]velocity = \frac{displacement}{time} \\ v = \frac{3000}{4.5} \\ v = 666.67 \: miles \: per \: hour \\ or \\ v = 666 \frac{2}{3} \: miles \: per \: hour[/tex]