4. At least one carbon-carbon bond in an alkyne is a triple covalent bond. Other bonds may be single or double carbon-carbon bonds and carbon-hydrogen bonds.

The equations that are nuclear reactions are as follows:

A nuclear reaction is a reaction that involves the fission of an atomic nucleus, or the fusion of one or more atomic nuclei and/or subatomic particles in which the number of protons and/or neutrons in a nucleus changes.

The products of a nuclear reaction may contain a different element or a different isotope of the same element.

Therefore, the equations that are nuclear reactions are as follows:

Learn more about nuclear reaction at: https://brainly.com/question/19752321

#SPJ4

Answer:

b. Reaction B involves a greater change and a change in element identity.

Explanation:

i got it wrong

Answer:

Therefore, the oxidation state of sulphur atoms in Na2S2O3 is −2 and +6.

Building blocks are the small units that make the larger, more complex molecule. The building block of protein is an amino acid and lipids are fatty acids and glycerols.

Proteins and lipids are the biomolecules that are involved in major reactions in the living system. They are composed of smaller subunits joined together by bonds.

Proteins are molecules made up of amino acids linked by the peptide bonds to form the chain of proteins that plays a crucial role in cell functioning.

Lipids are composed of fatty acids and glycerol linked by the ester bond, essential for the storage of energy and in the composition of the membranes.

Therefore, proteins are composed of amino acids and lipids of fatty acids and glycerol.

Learn more about building blocks here:

https://brainly.com/question/14527570

#SPJ1

Answer:

its probably all of the above, if not then it should be the formation of a new liquid, and a color change

Explanation:

Answer:

10. Butanoic acid

11. Methylpropanoate

Explanation:

In this case first you need to identify the functional group,secondly identify the longest chain that contains the particular functional group:

10. The functional group for this compound is a carboxylic acid due to the "CHO2" group..we have four carbons which makes the parent chain to be butane.since it's acarboxylic acid we replace the "e" at the end to "oic acid".

11. The functional group is ester "RCOOR".For the ester the longest chain is counted from the part of the carboxylic acid which in this case is a propane,and the part from the alcohol becomes a substituent. With esters you replace the "e" at the end of the parent name to "oate". When you write it down you begin with the substituent in this case "methyl" and the rest follows...



hope it is clear enough

The observation in the illustration remains in accordance with the law of conservation of mass assuming that moisture is present in the container.

The law state that mass can neither be created nor destroyed. However, mass can be converted from one form to another.

In this case, the ion was placed in a container of pure oxygen. Assuming that moisture is present, iron reacts with oxygen to form rust according to the following equation:

[tex]4Fe + 3O_2 + 6H_2O --- > 4Fe(OH)_3[/tex]

The rust formed will weigh more than the initial weight of the iron.

Without the presence of moisture, one can effectively conclude that the observation violates the law of conservation of mass.

More on the law of conservation of mass can be found here: https://brainly.com/question/13383562

#SPJ1

Answer:

True

Explanation:

The number of electrons are what determine an atom.

The number of electrons = number of protons

so the elements are different.

If the number of neutrons are different but the number of electrons and protons are same they are of the same element.

But here the number of protons are different so this is another element.

Answer:

See pictures!

Explanation:

Here is a drawing of butane (C4H10); labeled #1. An isomer of butane will also have the chemical formula C4H10 but is depicted different geometrically. I labeled this one #2.

Answer:

The motion of the molecules remains the same.

Answer:

Gases have no definite shape or volume. They are fluid, allowing particles/molecules to move freely.

The behavior of a gas is that the volume changes directly with temperature. With a constant volume, the pressure will be directly proportional to the amount of gas.

Explanation:

These are some of the properties I can think of

Explanation:

Critics of evolution commonly appeal to past scientific hoaxes such as the Piltdown Man forgery. It is argued that because scientists have been mistaken and deceived in the past about evidence for various aspects of evolution, the current evidence for evolution is likely to also be based on fraud and error.

Answer:

The HCS now requires the following elements on labels of hazardous chemicals: Name, Address and Telephone Number of the chemical manufacturer, importer or other responsible party

Explanation:

I tried, I think this is the correct answer.

Electrons are moved between two substances.

IUPAC is the nomenclature approach used for naming compounds. The compounds are ethane, butane, and butene.

IUPAC is the nomenclature method of the organic compounds that are universal and is recommended by the International union so that the names of the same chemical species are constant and ubiquitous all over.

The first compound has a single bond and two carbons hence ethane, the second compound has a single bond and four carbons and hence butane, and the third compound has one double bond and four carbon atoms and hence butene.

Therefore, the compounds are ethane, butane, and butene.

Learn more about IUPAC here:

https://brainly.com/question/14379357

#SPJ1

Answer:

solo esto se responderte

Explanation:

Algunos solutos (por ejemplo, cloruro de sodio (NaCl) en agua) exhiben una solubilidad bastante independiente de la temperatura. Unos pocos, como el sulfato de cerio (III) y el carbonato de litio, se vuelven menos solubles en agua a medida que aumenta la temperatura.

Answer:

1/8th = 12.5%

Explanation:

Three half lives would be   1/2 * 1/2 * 1/2 = 1/8 th of original

Biological specimens are the preserved remains of the biological materials. Compound A. formaldehyde or formalin is used to preserve the specimens. Thus, option A is correct.

Fluid preserved specimens are the biological material of the organism that are kept at the store to study and analyze over a long time without getting any damage. Formaldehyde along with alcohol is the most common preservative.

Formaldehyde is an organic compound that is colorless and pungent in the smell that preserves the dead remains of the organisms intact. It is antiseptic and germicide in nature that makes them best for the purpose.

Therefore, option A. formaldehyde is used to preserve the specimens.

Learn more about formaldehyde here:

https://brainly.com/question/16977261

#SPJ1

Answer:

so i put a...

Explanation:

Edge doesnt give correct answers on unit tests, but i passed with an 88 :)

Correct me if im wrong!!

Molarity is the ratio of the moles and the volume. The mass of 2.6 M sodium phosphate solution is 2131.22 gms.

Mass is the product of the moles and the molar mass of the substance. It is given as,

Mass = Moles × Molar mass

The moles from molar concentration is used to calculate mass as:

Mass = Molarity × volume × molar mass

= 2.6 × 5.0 × 163.94

= 2131.22 gms

Therefore, 2131.22 gms is the mass of sodium phosphate.

Learn more about mass here:

https://brainly.com/question/9829994

#SPJ1

[tex]\qquad\qquad\huge\underline{{\sf Answer}}[/tex]

Convection is a method of heat transfer that causes heat to be transferred from one object to another object with being in actual contact but I same atmosphere.

So, the correct phenomenon that describes how heat is transferred by Convection is :

Statement 2. Warmer air rises and copl air sinks.

Answer:

D. 44.2 g O₂

General Formulas and Concepts:
Gas Laws

Stoichiometry

Explanation:

Step 1: Define

Identify given.

61.9 L O₂ at STP

Step 2: Convert

We know that the oxygen gas is at STP. Therefore, we can set up and solve for how many moles of O₂ is present:

[tex]\displaystyle 61.9 \ \text{L} \ \text{O}_2 \bigg( \frac{1 \ \text{mol} \ \text{O}_2}{22.4 \ \text{L} \ \text{O}_2} \bigg) = 2.76339 \ \text{mol} \ \text{O}_2[/tex]

Recall the Periodic Table (Refer to attachments). Oxygen's atomic mass is roughly 16.00 grams per mole (g/mol). We can use a mole ratio to convert from moles to grams:

[tex]\displaystyle 2.76339 \ \text{mol} \ \text{O}_2 \bigg( \frac{16.00 \ \text{g} \ \text{O}_2}{1 \ \text{mol} \ \text{O}_2} \bigg) = 44.2143 \ \text{g} \ \text{O}_2[/tex]

Now we deal with sig figs. From the original problem, we are given 3 significant figures. Round your answer to the exact same number of sig figs:

[tex]\displaystyle 44.2143 \ \text{g} \ \text{O} \approx \boxed{ 44.2 \ \text{g} \ \text{O}_2 }[/tex]

∴ our answer is letter choice D.

---

Topic: AP Chemistry

Unit: Stoichiometry

Answer:

An exothermic reaction is happening, it is absorbing the cold.

In general, solids become more soluble as the temperature increases. This is why sugar dissolves better in hot water than in cold water. The table shows three examples of the solubility (g of solute per 100 g water) of substances at different temperatures.

Answer:

. a pure substance consists only of one element or one compound.

. a mixture consists of two or more different substances, not chemically        joined together

Answer:

chemical reaction

Explanation:

Reduction is the transfer of electrons between species in a chemical reaction where there is a process of gaining electrons or a decrease in the oxidation state by an element. A reduction chemical reaction involves increasing electrons associated with a single atom or a group of atom

pH = - log [H⁺]

pH = - log 4.29 x 10⁻⁴

pH = 4 - log 4.29

Answer: 4.6 M

Explanation:

Converting 25 g of HCl to moles, we get 25/36.46 = 0.68568294020845 moles.

Also, 150 mL = 0.150 L

So, the concentration is:

[tex]\frac{0.68568294020845}{0.150} =\boxed{4.6 \text{ M}}[/tex]

Answer:  

Part 1.  First, you find the Moles.

Part 2. The correct setup for finding the moles is: 25g  HCI x 1mol HCI/36.46g HCI

Part 3. The correct setup to find liters is: 150 mL x 1L/1000mL

Part 4. The molarity of this solution is: 4.6 M HCI

Explanation:

just listen lol