The far point from the mirror can a person be and still see an upright, magnified image is focus i.e. 35cm from mirror.
What is radius of curvature?The mirror is made out of a sphere which has its radius called the radius of curvature.
The focal length f is half of the radius of curvature R of the lens.
Given the radius of curvature is 70cm, then focal length will be 70/2 = 35cm.
The makeup mirror is a concave mirror which forms real and upright images. The magnified images are obtained when the object is placed between focus and mirror.
Thus, the far point is focus i.e. 35cm from mirror.
Learn more about radius of curvature.
https://brainly.com/question/22714636
#SPJ1
5.
A girl uses a 3.0 m long ramp to push her 110 kg motorbike up to a trailer, the floor of which is 1.2 m above the ground.
How much work is done on the motorbike?
we can use 3 formula for inclined plane
W=-ΔPE
W=ΔKE
W=mg sinθ. d
let's use the third formula
sinθ = 1.2 : 3
sinθ = = 0.4
W = m.g. sinθ. d
W = 110 x 10 x 0.4 x 3
W = 1320 J
What is the magnitude of the force needed to keep a 60. -newton rubber block moving across level, dry asphalt in a straight line at a constant speed of 2. 0 meters per second?.
Answer:
A force of μk⋅60N is needed to keep a 60-newton rubber block moving across level, dry asphalt in a straight line at a constant speed.
Explanation:
which of these galaxies would you most likely find at the center of a large cluster of galaxies?
Answer:
a large elliptical galaxy
Explanation:
Which of the following is velocity?
-35.2 m/s
125 m/s East
All of these are examples of velocity.
+95 m
[tex]\qquad\qquad\huge\underline{{\sf Answer}}[/tex]
Velocity is defined as total displacement occurrence by the given time interval, and since it's a Vector quantity it has direction as well.
So, the correct choice will be ~ B. 125 m/ East
Because it has unit of Velocity ( that is - m/s ) and it shows direction of displacement ( that is - East )
A glass prism can be used to show the dispersion of white light to form a spectrum.
a.Draw a diagram to show how a ray of white light is dispersed as it passes through a prism.
b.Which colour of light is most strongly dispersed (deflected) as it passes through the prism?
c.Explain why some colours of light are more strongly dispersed than others.
For each of the following statements, decide whether it is true or false.
a) For Diagram refer to the attachment.
b) The colour that dispersed most is violet.
c) Every colour has its own wavelengths/ frequency. Different colours move with same speed in air / vaccum. But their speeds in refracting media like glass are different. Therefore, refractive index of the medium for different colours is different. Some gets strongly dispersed due to shorter wavelengths.
Explanation :
Dispersion of Light : The splitting up of a white light into different colours is called Dispersion of light. The light is made up of different colours. Each colour travels at its own speed inside a prism. Due to this different colours of light bend through different angles with respect to the incident ray , as they pass through a prism. The eed light bends the least while the violet the most. Thus, the rays of each colour emerge along different paths and thus becomes distinct.A falling flowerpot has a mass of 5 kg. After falling for one second, it has a speed of 10 m/s. What is its kinetic energy?
KE = 1/2mv²
KE = 1/2 x 5 x (10²)
KE = 250 J
When an ice pack is applied to an injury, thermal energy from the injured area transfers to the ice, causing the blood
vessels within the area to constrict, which reduces the swelling.
How is thermal energy transferred in this scenario?
a conduction
b convection
c radiation
Thermal energy from the injured area transfers to the ice and the thermal energy transferred in this scenario is conduction.
What is Heat transfer by conduction?
Conduction heat transfer is the transfer of heat through matter such as solids, liquids, or gases without bulk motion of the matter.
The ice pack absorbs the heat energy without the actual movement of the molecules of the ice pack.
Thus, thermal energy from the injured area transfers to the ice and the thermal energy transferred in this scenario is conduction.
Learn more about conduction here: https://brainly.com/question/893656
#SPJ1
Answer:
1. What is the best description of thermal energy?
B) Thermal energy is the energy in matter due to the movement of its atoms and/or molecules.
2. An athlete hurts their wrist. They put an ice directly on the wrist. In which direction is the thermal energy moving?
B) The thermal energy is moving from the wrist to the ice pack.
3. What happens when two substances with different temperatures come into contact?
B) Thermal energy is transferred from the warmer substance to the cooler substance.
4. Which is the best description of what happens when thermal energy is removed from a substance?
B) Its particles lose kinetic energy and move more slowly.
5. Which of the following is typically part of the knowledge base of research and development scientists working on heating devices?
A) substances and their properties
Explanation:
i just finished the quick check
PLEASE HELP
Which of the following is a characteristic property of the alkaline earth
metals?
A. They are harder than alkali metals.
B. They are more reactive than alkali metals.
C. They all have 3 valence electrons.
D. They are all radioactive.
Answer:
It's D, they're all radioactive. This is due to the molecules that it is made up of
Answer:
the answer is A
Explanation:
I hope it helps you
A dolphin leaps out of the water
at 6.25 m/s at a 45.0° angle.
How far away does it land?
(Unit = m)
x max = (vi² sin 2α) / g
x max = (6.25² sin 90)/10
x max = 39.0625/10 = 3.91 m
Warm air is _____ dense than cold air, and warm air holds _____ moisture than cold air.
Answer:
Warm air is less dense than cold air, and warm air holds more moisture than cold air.
Explanation:
HOPE THIS HELPS AND HAVE A NICE DAY <3
Spaceship I, which contains students taking a physics exam, approaches Earth with a speed of 0.60c, while spaceship II, which contains instructors proctoring the exam, moves at 0.28c (relative to Earth) directly toward the students. If the instructors in spaceship II stop the exam after 50 min have passed on their clock, how long does the exam last as measured by (a) the students (b) An observer on the Earth?
Answer:
Let β = v / c
proper time Δt' is measured in a frame at the same place in a given frame - the proper time is measured in spaceship II moving at .28 c
a) spaceship I is moving at (.6 - .28) c = .32 c relative to proper time
Δt = Δt' / (1 - β^2)^1/2 as measured by students in ship I
Δt = 50 / (1 - .32^2)^1/2 = 52.8 m measured by students
b) Δt = 50 / (1 - .28^2)^1/2 = 52.1 min time elapsed for observer on earth
In a building, air moves due to currents caused by temperature differences. Which
A. statement best describes these currents?
B. They transfer thermal energy due to radiation.
C. They transfer electrical energy due to convection.
D. They transfer thermal energy due to convection.
Answer:
D. they transfer thermal energy due to convection
In a building, air moves due to currents caused by temperature differences. They transfer thermal energy due to convection. this statement best describes these currents. Hence option D is correct.
What is Temperature ?Temperature is a physical quantity which measures hotness and coldness of a body. Temperature measures the degree of vibration of molecule in a body. Temperature is measured in centigrade (°C), Fahrenheit (°F) and Kelvin (K) in which Kelvin (K) is a SI unit of temperature. Absolute scale of temperature means Kelvin scale of temperature. relation between Kelvin(K) and centigrade (°C), °C= K - 273.15 from equation, 273.15 K means 0 °C, which is freezing point of water (ice). when we give temperature to the body, its molecule or atom absorbs thermal energy and vibrate about their mean position. Amplitude of vibration get increases as we go on increasing temperature and for higher temperature force of attraction between molecules gets weaker. Hence for higher temperature, due to weaken the force of attraction between molecule, solid goes into liquid state. and further increase in temperature liquid goes into gaseous state.
Hence option D is correct.
To know more about Temperature :
https://brainly.com/question/11464844
#SPJ3.
3. Assume that a sample decays with a given half-life. Will you be able to observe when the sample has completely decayed? Why or why not?
Answer:
No
Explanation:
It will never decay to zero
after one half life there is 1/2 left
after the next half life thee is 1/2 * 1/2 = 1/4 left
then 1/8th then 1/16 th then 1/32 1/64 1/128 ........to infinity
while htere is a VERY small amount left , there will never be ZERO left
Why do we feel the force of gravity from the Earth but we don’t feel the force of gravity from the moon?
Answer:
The gravitational force on the moon is less than on Earth because the strength of gravity is determined by an object's mass. The bigger the object, the bigger the gravitational force. Gravity is pretty much everywhere. We just feel it in different ways depending on our state of motion.
Explanation:
Hope this helped!!
If a 40.1 g piece of iron at 652 °C is dropped into a sample of 328 g of water at 32.4 °C, what will the final temperature be after thermal equilibrium is established? Assume that no heat is lost during the process. specific heat capacity of iron is 0.45 J/g C and water is 4.184 J/g C. SHOW YOUR WORK.
The final temperature of the mixture after thermal equilibrium is reached given the data is 40.4 °C
Data obtained from the questionMass of iron (M) = 40.1 gTemperature of iron (T) = 652 °C Specific heat capacity of iron (C) = 0.45 J/gºCMass of water (Mᵥᵥ) = 328 gTemperature warm water (Tᵥᵥ) = 32.4 °CSpecific heat capacity of the water (Cᵥᵥ) = 4.184 J/gºC Equilibrium temperature (Tₑ) =? How to determine the equilibrium temperatureHeat loss = Heat gain
MC(T – Tₑ) = MᵥᵥCᵥᵥ(Tₑ – Tᵥᵥ)
40.1 × 0.45(652 – Tₑ) = 328 × 4.184(Tₑ – 32.4)
18.045(652 – Tₑ) = 1372.352(Tₑ – 32.5)
Clear bracket
11765.34 – 18.045Tₑ = 1372.352Tₑ – 44464.2048
Collect like terms
11765.34 + 44464.2048 = 1372.352Tₑ + 18.045Tₑ
56229.5448 = 1390.397Tₑ
Divide both side by 1390.397
Tₑ = 56229.5448 / 1390.397
Tₑ = 40.4 °C
Learn more about heat transfer:
https://brainly.com/question/6363778
#SPJ1
What is the world’s biggest source of electricity production?.
Coal, followed by gas is the largest source of electricity
Coal is the world’s biggest source of electricity production.
The world's biggest source of electricity production is Coal. Coal is a fossil fuel that is mined from the ground and is the largest source of energy for the generation of electricity worldwide. Coal is burned to produce heat, which is then used to boil water and produce steam. The steam drives turbines that generate electricity.
There are other sources of electricity as well, such as natural gas, nuclear energy, hydroelectric power, and renewable energy sources like wind and solar power.
However, coal is the largest source of electricity production in the world.
1 astronomical unit (A) is
149,597,871 kilometres
hope it helps...!!!
Why do you think there are so many more autotrophs than consumers on Earth?
Helppp
There are many Autotrophs than consumers because : Autotrophs are the bases of any food chain/web
Function of AutotrophsAutotrophs capture the energy required for every food chain or web from which sustains other organisms in the food chain form sunlight and chemicals. Also there is always more biomass present in the lower levels of the trophic system as biomass decreases as we move up the food chain.
Since autotrophs are producers, for a healthy food chain there would be more autotrophs than consumers.
Hence we can conclude that There are many Autotrophs than consumers because : Autotrophs are the bases of any food chain/web
Learn more about Autotrophs : https://brainly.com/question/10253663
#SPJ1
Work is done when:______.a. you apply a force to an object and the object moves in any direction. b. you apply a force to an object and it moves in the same direction.c. you apply a force to an object and it moves in the opposite direction. d. You apply a force to an object and it doesn't move.
Answer:
b
Explanation:
The formula for work done (W) is:
W = Force x Distance moved in the direction of force
This means that the object needs to move in the direction of the force, otherwise no work is done in that direction.
Hope this helps!
What is needed for water condensation to occur
Answer:
Warm moist air, hope this helps
Answer:
A heat source high enough to boil the water and the water itself
Explanation:
15 PNTS
Select the correct answer. Which of the following is not produced in fission reactions?
A. greenhouse gases
B. heat
C. isotopes
D. neutrons
Answer:
A. Greenhouse gases
Explanation:
Because nuclear fission involves the modification of atoms.
Answer:
Greenhouse gases, because in nuclear fission, we are talking about modifying strictly atoms to get a reaction, therefore it would not make sense for greenhouse gases to be a reaction.
a truck is moving towards east with the velocity of 20 metre per second and another is moving toward the west with the velocity of 15 metre per second calculate the relative velocity If those trucks move at the same time from the same place calculate the distance between them after 2 minutes
(a) The relative velocity If those trucks move at the same time from the same place is 35 m/s.
(b) The distance between them after 2 minutes is 4,200 m.
Relative velocity of the two trucksThe relative velocity of the two truck is calculated as follows;
Vr = 20 m/s - (-15 m/s)
Vr = 20 m/s + 15 m/s
Vr = 35 m/s
Distance between the object after 2 minsd = Vr(t)
d = 35(2 x 60 s)
d = 4,200 m
Learn more about relative velocity here: https://brainly.com/question/17228388
#SPJ1
What is the de Broglie wavelength of a 2.89 x 10-28 kg particle moving
at 3.00 x 108 m/s? (h = 6.626 x 10-34 J-s)
Explanation:
formula is given by
h/mv
where h is 6.626 × 10 ^-34
and c = 3 × 10^8
m = mass
by plugging in the values in the formula, the de Brogile wavelength is equal to 7.6424 × 10^(-15)
would appreciate a brainliest :)
Two coherent sources of light are three
wavelengths out of phase. does light from these
sources experience constructive interference,
destructive interference, or no interference at all?
explain how you know.
Answer:
The difference phase = 3 λ
In terms of wavelength the difference of phase is zero so the sources would experience "constructive" interphase at that point.
If the light from the sources differed by 1/2, 3/2, 5/2 wavelengths etc, then the sources would be out of phase at that point.
If you have a voltage of 120 volts entering your house and a light bulb with 0.75 amperes flowing through it, how many watts is your light bulb?
30 watts
120 watts
60 watts
90 watts
Answer:
90 watts
Explanation:
Formula for Power (using voltage and current) :
P = VIP = 120 V × 0.75 AP = 90 wattsAnswer:
90 watts
Explanation:
Watts = volts x amperes
120X.75 = 90
[tex]{\huge\fcolorbox{blue}{black}{\pink{\:\:\:\:\:\:\:\:\:\:\:☞Question\:\:\:\:\:\:\:\:}}}[/tex]
What is Wave Optics?
Thanks (:
the branch of optics that studies interference, diffraction, polarization, and other phenomena for which the ray approximation of geometric optics is not valid.
A company is creating an advertisement for colored contact lenses. In the ad, the company wants to include the
phrase "Each contact lens is like a second
Which part of the eye would be most accurate in completing the phrase?
retina
sclera
iris
pupil
Answer:
option C) the iris
Explanation:
2023
Multiple point perspective is a system of perspective in which __________________ a. there are a number of vanishing points, usually created by multiple objects. b. there are two vanishing points. c. all lines within the picture lead to a single vanishing point. d. all the sides are measured full size and scaled with the drawing at 30° to the horizontal. please select the best answer from the choices provided a b c d
Multiple point perspective is a system of perspective in which: A. there are a number of vanishing points, usually created by multiple objects.
What is multiple point perspective?Multiple point perspective can be defined as a system of perspective in which each items (objects) has a number of interacting lines with different vanishing points.
This ultimately implies that, a multiple point perspective is a system of perspective which is created with a number of vanishing points, that are usually created by multiple objects.
Read more on multiple point perspective here: https://brainly.com/question/5398474
#SPJ4
Answer:
A
Explanation:
Question 8
If a cheetah can run at a speed of 100 km/h for the initial 500 m of its chase, h
much time would it take to catch its prey that is at a distance of 100 m?
O 1.5 s
O 2.3s
O 3.6s
O 4.8s
Answer:
3.6 s
Explanation:
100 km/hr =27.77 m/s
100/27.77=3.6 sec
Describe the sound produced by an instrument of length L, that is open at both ends. Be sure to include the terms pitch, frequency, timbre, nodes and antinodes
The sound produced by an instrument of length L that is open at one end posses has a high frequency.
What is Sound?Sound is kind of vibration which travels in the form of sinusoidal wave through a medium which can be solid, liquid or gas/air.
Sound produced by an instrument which has an open end has a high
frequency and pitch, nodes , timbre and a low antinode. These are all the characteristics of a sound produced by the instrument.
Learn more about Sound.
https://brainly.com/question/1515875
#SPJ1
