Answer:
17.78 gm
Explanation:
2 H20 mole weight = 36 gm
which leads to 32 gm O2
36 / 32 = 20 / x x = 17.78 gm
Which of the following could be a compound?
A
two atoms of oxygen bonded together
B
individual atoms of argon
C
hydrogen bonded to oxygen
D
a mixture of oxygen and nitrogen gases
Answer:
b. Individual atoms of argon
Explanation:
Hope this helps!
-Justin
Suppose that sequence of bases on one segment of DNA is ATCGGA. What is the sequence of the bases on the complementary segment?
is it
A: ATCGGA
B: CGATTC
C: AGGCTA
D: TAGCCT
And why is it one of those that you picked.
Answer:
A: ATCGGA
Explanation:
First, think about which base pairs arise in complementary strands of DNA..
How many moles of KBr will be produced from 7 moles of BaBr2?
BaBr2 + K2SO4 --> 2 KBr + BaSO4
1 mole KBr
7 moles KBr
3.5 moles KBr
14 moles KBr
1 mol BaBR2 produces 2mol KBr .
7 mol s of BaBr_2 produces:-
7(2)14mol KBrOption D is correct
Flammable liquids are those that have a flashpoint of:.
Answer:
Flammable liquid is any liquid having a flashpoint at or below 199.4 °F (93 °C).
Explanation:
:)
Flashpoints for flammable liquids are at 100°F. Lower flash points allow for easier ignition of liquids. A liquid's flash point is the lowest temperature at which a concentrated enough layer of vapor accumulates on top of its surface to allow for ignition.
A liquid that is flammable has a flash point* below 37.8 ° C (100 ° F). A flammable liquid has a flash point that ranges from 37.8 to 93.3° C (100 to 200° F), which is above the standard working temperature. Flammable liquids emit a vapor that, at standard working temperatures, is easily ignitable.
The substance ignites more readily the lower the flash point. For instance, petrol is more flammable than ethylene glycol and has a flash point of about -40 degrees C (-40 °F).
To know more about Flammable liquids, visit;
https://brainly.com/question/33716084
#SPJ4
A 300 L sample of hydrogen was compressed to a volume of 200 L at STP. If the initial temperature is 35.0 °C,
what was the initial pressure?
* please show equation!!
brainliest!!
Answer:
76.210kPa
Explanation:
[tex] \frac{p1v1}{t1} = \frac{p2v2}{t2} \\ p1 = \frac{p2v2t1}{v1t1} \\ p1 = \frac{101.325 \times 200 \times 308}{300 \times 273} \\ p1 = 76.210kpa[/tex]
Why Don't Birds Get Electrocuted When They Land on Electric Wires?
Answer: Because most electrical wires have an outer coating so you don't get electrocuted when you touch them. You could ask why don't you get electrocuted when you touch a phone charger, same answer, same outer coating.
Answer:
The copper in electrical wires is a great conductor, and birds are not great conductors. So the energy will just bypass the birds and keeps moving along the wire.
Explanation:
Please help me for this
Answer:
it says tick the box next to the correct answer so it'd be right to tick the last box:
The particles of the gas slow down
what is the volume of 0.4 mole of gas at stp? 30 points!
Answer:
89.6 liters
Explanation:
A STP (standard temperature and pressure) ONE mole of any idea gas will occupies 22.4 liters. So,...
4 moles x 22.4 L/mol = 89.6 liters
8.96 L is the answer
Which gland of the endocrine system is located near the brain?
Answer:
The pituitary gland is located below the brain. :)
Which type of carbon fixation stores carbon dioxide in acid form? a. c3 b. c4 c. cam d. all of the above
The type of carbon fixation stores carbon dioxide in acid form is CAM i.e. crassulacean acid metabolism.
What are CAM?CAM stands for crassulacean acid metabolism in this process photosynsthesis is occured at day time but the exchange of gases takes place at night itself only.
In this carbon fixation process, carbon dioxide is stored in the form of organic acid malic acid and losses carbon dioxide at the night time and by doing this it helps in the storage of water.
Hence option (C) is correct.
To know more about CAM, visit the below link:
https://brainly.com/question/4170802
Answer:
CAM
Explanation:
Yes the correct answer is option C, ( CAM) I just took the test.
What happens to the temperature of a gas when it is compressed?.
the number of cobalt atoms in 0.00103 mole of cobalt
Working with a strong acid, such as sulfuric or nitric acid, requires special care to strictly avoid contact with the acid. What should you do if do come in contact with the acid despite your best efforts?.
Answer:
immediately flush the affected area gently with lukewarm water for at least 30 uninterrupted minutes
Explanation:
If strong acid comes into contact with the skin, immediately wash the affected area gently with lukewarm water for at least 30 minutes and get medical attention immediately.
How to care for acid exposure?
Exposure to strong acids such as sulphuric acid can occur as skin contact, ingestion, or inhalation of vapors. Each kind of exposure can create serious hazards to health and should be managed quickly and appropriately by medical professionals to reduce damage and health risks.
If strong acid comes into contact with the skin, quickly flush the affected area gently with cold water for at least 30 minutes and seek medical attention immediately. If strong acid gets into your eyes, then flush the eye(s) with water for 30 minutes.
If accidentally ingest strong acid, rinse your mouth with water immediately. But do not induce vomiting and continually rinse your mouth with water. If you inhale strong acid aerosols, get fresh air, and medical attention immediately.
Learn more about acid exposure, here:
https://brainly.com/question/8375494
#SPJ2
Adjust the alkalinity from 70 ppm to 100 ppm in a 250. 000 gallon pool using sodium bicarbonate
For an adjustment of the alkalinity from 70 ppm to 100 ppm in a 250,000 gallon pool using sodium bicarbonate, the amount of added chemical is mathematically given as
X=105lbs
What is the amount of added chemical?Generally, the equation for the Chemical added is mathematically given as
X=requred usage*desired change/10ppm*pool of gallon/10000
Therefore
X=1.4*(100-70/10)*(250000/10000
X=105lbs
In conclusion, the added chemical
X=105lbs
Read more about Chemical
https://brainly.com/question/6876669
A Cu/Cu2+ concentration cell has a voltage of 0.21 V at 25 ∘C . The concentration of Cu2+ in the cathode is 1.6×10−3 molL−1 .
What is the concentration of Cu2+ in the anode?
For a Cu/Cu2+ concentration cell has a voltage of 0.21 V at 25 ∘C, the concentration is mathematically given as
c1=2.7*10^6.77m
What is the concentration of Cu2+ in the anode?Generally, the equation for the Chemical reaction is mathematically given as
Cu---->cu +2^e O
2e+Cu+2 ---->Cu R
Therefore
[tex]Ecell=\frac{0.0591}{n}log(c2/c1)\\\\0.25=\frac{0.0591}{2}log(1.6*10^{-3}/c1)[/tex]
c1=2.7*10^6.77m
In conclusion, the concentration is
c1=2.7*10^6.77m
Read more about Chemical reaction
https://brainly.com/question/16416932
Why is innate immunity referred to as nonspecific?
because it provides a built-in mechanism of defense that does not require "training"
because it is a form of defense found in all animal species
because it is a form of defense that functions in all human body systems
because it provides defense against a wide range of pathogens
Answer:
c
Explanation:
The innate immune system is the body's first line of defense against germs entering the body. It responds in the same way to all germs and foreign substances, which is why it is sometimes referred to as the "nonspecific" immune system
Reading Strategy (page 412)
Relating Text and Visuals As you read, look carefully at Pigures 1
and 2 and read their captions. Complete the table by describing the
work ohown in each figure for more information on this Reading
Strategy, see the Reading and Study Skills in the skills and
Reference Handbook at the end of your textbook
Figure
Direction
of Force
Oirection
of Motion
Is Work
Dono?
20
20
20
412 A101
Work is said to be done when force moves a distance and the direction of motion is in the direction of applied force.
What is work done?Work done is defined as the product of applied force and the distance which the applied force moves.
According to Newton's second law of motion the acceleration of a body is inversely to its mass ut directly proportional to the force and takes place in the direction of the applied force.
Therefore, work is done when force moves a distance and the direction of motion is in the direction of applied force.
Learn more about work done at: https://brainly.com/question/19931524
Many human epithelial cells produce sticky mucus. Which of the following statements best describes how this mucus functions in nonspecific adaptive immunity?
provides an impenetrable outer covering that cannot be penetrated by most pathogens
assists in the physical removal of pathogens from the body
produces antibodies that will cause pathogen lysis
promotes growth of the body's normal microbiota
Answer:
The answer is provides an impenetrable outer covering that cannot be penetrated by most pathogens :)
Explanation:
The cells line the skin so then it makes it really difficult for germs to get through. :)
Have an amazing day!!
Which of the following best
explains why matter changes
from one phase to another?
A. Changes in color causes matter to change
phase.
B. Changes in size causes matter to change
phase.
C. Changes in energy causes matter to change
phase.
D. Changes in volume causes matter to change
phase.
Answer:
c changes in energy causes matter to change
Which of the following statements accurately describes energy during the phase change of sublimation?
Energy is released.
Energy slows down.
Energy stays the same.
Energy is absorbed.
Answer: Your answer is D. Energy is absorbed.
Hope this helps!
Answer:
Energy is absorbed
Explanation:
For sublimation ....let's look at ice as an example
you must add calories (heat ) to melt the ice and then heat to produce water vapor .... sublimation requires energy input
12. Which is true of this cell as the redox reaction is
taking place?
1) The mass of Al electrode will increase, and
the mass of Ni electrode will decrease.
2) The mass of Al electrode will decrease, and
the mass of Ni electrode will increase.
3) The mass of Al electrode will increase, and the
mass of Ni electrode will remain the same.
4) The mass of Al electrode will remain the same,
and the mass of Ni electrode will increase.
Conuri
how wind can affect the cooling of the air parcels
Answer:
Wind pushes air parcels even higher in the troposphere, where it is colder. The air parcels will then lose more energy and more rain can happen.
Explanation:
Answer:
Wind propels air packages upward into the troposphere, which is cooler. As a result, the air packets will lose more energy and more rain may fall.
Explanation:
How many grams of rock salt, Naci, do you need to add to a 3.78 kg of ice, to get the temperature to drop to -190?
1129.9 grams of rock salt, NaCl should be added to a 3.78 kg of ice to get the temperature to drop to -19 °C.
What mass of rock salt is required?The mass of rock salt required to lower the temperature of ice by 19 °C is determined using the Blagden's Law given below:
[tex]ΔT = iK_fm[/tex]where;
ΔT = Change in temperature in °Ci = van't Hoff factorKf = molal freezing point depression constantm = molality of the solute in mol solute/kg solvent.The van't hoff factor for NaCl, i = 2
Kf for water/ice = 1.86 °C kg/mol
molalityof NaCl = (mass/molar massl) / kg of ice
The mass of NaCl is derived as follows:
mass of NaCl = molality × mass of ice × molar massmolar mass of NaCl = 58.5
mass of ice = 3.78 kg
Let molality of NaCl = X
ΔT = 19 °C
Inputting the values above in the equation of Blagden law:
19 = 2 x 1.86 °C kg/mol x X
X = 5.11 mol/kg
Then, the mass of NaCl will be;
mass of NaCl = 5.11 × 3.78 × 58.5
mass of NaCl = 1129.9 g
Therefore, 1129.9 grams of rock salt, NaCl should be added to a 3.78 kg of ice to get the temperature to drop to -19 °C.
Learn more about mass at: https://brainly.com/question/15476873
Uranium-235 has a half-life of 713 million years. Would uranium-235 or carbon-14 be more useful for dating a fossil from Precambrian time? please help im lost on this and its due tomorrow!
Uranium-235 which has a half-life of 713 million years will best suited in dating a fossil from Precambrian time.
What is a Fossil?Thi8s is defined as a trace of an animal or plant of a past geologic age that has been preserved in Earth's crust.
The Precambrian time occurred around 4.6 billions years ago and Uranium-235 which having a half-life of 713 million years means it's more useful when compared to carbon-14 which has a half life of 5,370 years.
Read more about Fossil here https://brainly.com/question/11829803
What is the pH of a 4.5 x 10^-3M HI solution?
A) 0.1
B) 4.8
C) 3.2
D) 2.4
How many moles of potassium sulfate would you need to prepare 1200 grams of 5.0% potassium sulfate (m/m) solution? Select one: a. 0.34 mols b. 60 mols c. 3.4 mols d. 174 mols
Answer:
The moles of potassium that you would need to prepare 1200 g of 5% potassium sulfate solution is 1.538 moles
Which type of fuel can only be used in certain geographic areas?
O A. Nuclear
O B. Biomass
O C. Coal
O D. Wind
Answer:
A) Nuculear
Explanation:
Nuclear powerplants are danguorous for the ecosystem and incase of an exsplosion nuclear is the hardest to recover from. Especially if you know the story about Chernobyl blow up. many animals began to grow diffrent mutations and evryone had to evacuate from having desieses and mutations.
Hoped this helped...
If 40mL of 2.50M HCl neutralizes 500ml. of KOH, what is the molarity of the KOH?
The molarity of the 500 mL KOH solution needed to neutralize the 40 mL of 2.50 M HCl is 0.2 M
Balanced equationHCl + KOH —> KCl + H₂O
From the balanced equation above,
The mole ratio of the acid, HCl (nA) = 1
The mole ratio of the base, KOH (nB) = 1
How to determine the molarity of KOH Volume of acid, HCl (Va) = 40 mLMolarity of acid, HCl (Ma) = 2.5 MVolume of base, KOH (Vb) = 500 mL Molarity of base, KOH (Mb) =?MaVa / MbVb = nA / nB
(2.5 × 40) / (0.15 × Vb) = 1
100 / (Mb × 500) = 1
Cross multiply
Mb × 500 = 100
Divide both side by 500
Mb = 100 / 500
Mb = 0.2 M
Thus, the molarity of the KOH solution needed is 0.2 M
Learn more about titration:
https://brainly.com/question/14356286
How may PARTICLES of oxygen ore requried to make 6.7 moles of Carbon Dioxide
Answer:
0.15 moles
Explanation:
6.7moles x 1 mole co2 over 44.01 g = 0.15 moles
how many moles of H2 would be required to produce 37.0 moles of water?
Hii there !
The reaction accompanying production of water in this case would be -
[tex]\green{ \underline { \boxed{ \sf{H_2+ \frac{1}{2}O_2\longrightarrow H_2O}}}}[/tex]
Thus ,by observing the reaction, we can conclude that 1 mole of Hydrogen (H[tex]_2[/tex])react with 1/2 mole of oxygen(O[tex]_2[/tex])to produce 1 mole of water (H[tex]_2[/tex]O)
[tex]\implies[/tex]Therefore, 37.0 moles of hydrogen(H[tex]_2[/tex]) will be required to produce 37.0 moles of water.
Hope it helps.
