Soil nutrients are minerals which are required for growth either small or relatively large quantities
What are soil minerals?Soil minerals are the metallic and non-metallic nutrients found in the soil which are required by plants for growth.
Based on plants requirements, the major nutrients are nitrogen, phosphorus and potassium.
Plants also require other nutrients like copper, zinc, sulfur, iron, etc., in smaller quantities.
Based on the results of the soil test:
The deficiencies nutrients are copper and potassium The excess nutrients are phosphorus, sulfur, iron and zincThe deficiencies and excesses can be corrected by selectively reducing the application of the excess soil nutrients and addition of the deficient nutrients.
Learn more about soil nutrients at: https://brainly.com/question/8901446
Based on the following data, what is the I-I bond energy?
[tex]\frac{1}{2}[/tex]H2(g) + [tex]\frac{1}{2}[/tex]I2(g) → HI(g); ΔH = 26.36 kJ
Bond Bond Energy (kJ/mol)
H-H 435
H-I 295
A) 208 kJ/mol
B) 155 kJ/mol
C) 365 kJ/mol
D) -208 kJ/mol
E) -155 kJ/mol
Answer:
please you left that of I2 gas
if the concentration of H+ ions in a solution is 3.16 x 10^-4 mol/L then what is the concentration of OH- ions
Answer:
10-4mol/l
[H+]=10-7 , which we call a pH of 7.
This means, for example, that a hydrogen-ion concentration of a solution with a pH of 4 is 10-4mol/l, meaning it contains 0.0001 mol of hydrogen ions in a solution of 1 liter.
Explanation:
3.12×10⁻¹⁰M is the concentration of OH⁻ ions. Concentration in chemistry refers to the quantity of a material in a certain area.
What is concentration?
Concentration in chemistry refers to the quantity of a material in a certain area. The ratio of the solvent in the solution to the solvent or whole solution is another way to define concentration. In order to express concentration, mass every unit volume is typically used. The solute concentration can, however, alternatively be stated in moles or volumetric units.
If a formula describing a shape's boundary is known, it is possible to use integral calculus to determine the volumes of more complex shapes. No object in the dimensions of zero, one, or two has volume; in the dimensions of four and above, the hypervolume is a concept similar to the standard volume.
[H⁺] [OH⁻] = 10 ⁻¹⁴
3.16 x 10⁻⁴ × [OH⁻] = 10 ⁻¹⁴
[OH⁻] = 3.12×10⁻¹⁰M
Therefore, 3.12×10⁻¹⁰M is the concentration of OH⁻ ions.
To know more about Concentration, here:
https://brainly.com/question/30862330
#SPJ2
Which metal would cause the greatest increase in the temperature of the water in the calorimeter: the
one with the higher specific heat, or the one with the lower specific heat? Explain.
(THE EXPLANATION IS IMPORTANT)
Answer:
The one with higher specific heat
Explanation:
A metal with the highest specific heat will cause the greatest increase in temperature of water in a calorimeter because the metal would hold more heat, and then transfer it to the water.
Answer:
[tex] \sf \: \fbox{Metal \: with \: the \: higher \: specific \: heat.}[/tex]
Explanation:
HEAT:
In the universe there are only two mods of Transfer of Energy one is Heat and another is Work. That's why Heat and Work are well knowns Path function.
Specific Heat:
The specific Heat of any material is the heat gained or released by the material to raise or fall it's temperature by 1°C per unit mass of the material.
The heat gained or released (Q) is directly proportional to the mass of substance(m) and rise or fall of temp(∆T)
given by the equation,
[tex]\sf \: s = \frac{Q}{m \Delta T} [/tex]
Where S is the proportionality constant also known as specific Heat.
S.I. unit of s is joule/kg-K
C.G.S unit is cal/gm °C.
Specific heat of water: s = 4200 J/kg°C
Coming to the next important term calorimeter,
Calorimeter:
We already knew above that heat is not a form of energy it's a mod of transfer of energy, consider One Energy converted from State A to State B then the total heat(Transferred energy) during the process is measured by a device known as Calorimeter.
Now, coming to your question.
Consider a metal, with lower specific heat (s), the equation we derived above tells that specific heat is directly proportional to energy per unit change in temperature, that means if specific heat will be low, lesser amount of Energy(Heat) will be produced which will cause the minor increase in the temperature.
Which is a contradiction hence the answer would be Metal with the higher specific heat.
This is the final answer!
Thanks for joining brainly community!
What effect would you expect this to have on CO2 levels in the atmosphere?
expect what to have?!?!?!?
The picture compound has which Bond
pls help me with this
Answer:
silver
5/20
=0.25.................
Answer:
C
Explanation:
Aluminum density = 0.5
Iron density = 2
Gold density = 1
Silver density = 0.25
The smallest value is 0.25 hence silver has less density.
Which of the following is the correct definition of nuclear energy? A. energy of an object due to the random motion of its atoms and molecules B. energy an object has because of its motion or position C. energy produced from the splitting of atoms D. energy resulting from the flow of charged particles, such as electrons or ions
Answer:
c. energy from splitting energy
Explanation:
. Define the term Flame?
Answer:
A hot glowing body of ignited gas that is generated by something on fire.
How many grams of CO2 are produced from the burning of 3.0 mol of amyl alcohol?
2C5H11OH + 15O2➡️ 10CO2 + 12H2O
*Please show work
The amount, in grams, of [tex]CO_2[/tex] that would be produced from the burning of 3.0 mol amyl alcohol would be 660.15 grams
Stoichiometric calculationFrom the equation of the reaction:
[tex]2C_5H_1_1OH + 15O2 ---- > 10CO_2 + 12H_2O[/tex]
The mole ratio of amyl alcohol to the [tex]CO_2[/tex] produced is 2:10.
Thus, for 3.0 mol of amyl alcohol, 15 mol of [tex]CO_2[/tex] would be produced.
Mass of 15 mol [tex]CO_2[/tex] = 15 x 44.01 = 660.15 grams
More on stoichiometric calculations can be found here: https://brainly.com/question/8062886
H2O2_H2O+O2 balance the equation using inspection
Answer:
2H2O2 → 2H2O + O2
A sample of methane gas contains 3.62x10^29 atoms of hydrogen. What is the mass of the sample?
The mass of the sample to methane that contains 3.62×10²⁹ atoms of hydrogen is 4810631.24 g
Avogadro's hypothesis6.02×10²³ atoms = 1 mole of Hydrogen
How to determine the mass of Hydrogen1 mole of Hydrogen = 2 g
Thus,
6.02×10²³ atoms = 2 g of Hydrogen
Therefore,
3.62×10²⁹ atoms = (3.62×10²⁹ × 2) / 6.02×10²³
3.62×10²⁹ atoms = 1202657.81 g of Hydrogen
How to determine the mass of methane 1 mole of methane, CH₄ = 12 + (4×1) = 16 gMass of H in 16 g of CH₄ = 4 × 1 = 4 gThus,
4 g of Hydrogen is present in 16 g of methane.
Therefore,
1202657.81 g of Hydrogen will be present in = (1202657.81 × 16) / 4 = 4810631.24 g of methane
Thus, we can conclude that the mass of the sample of methane is 4810631.24 g
Learn more about Avogadro's number:
https://brainly.com/question/26141731
Scenario A: 100 g of glucose in the presence of unlimited oxygen is metabolized through aerobic respiration.
Scenario B: 100 g of glucose in the absence of oxygen is metabolized through anaerobic respiration.
Would the mass of products produced in Scenario A be greater than, less than, or equal to the mass of products produced in Scenario B? Justify your answer.
2KBr + Cl₂ → 2KCI + Br₂
What type of chemical reaction is this?
Answer:
Displacement reaction
Explanation:
A displacement reaction is a reaction where a more reactive halogen will displace a less reactive one.
Reactivity decreases down group 17. So Chlorine, being the more reactive halogen, substitutes in the place of Br which is less reactive.
About how many centimeters will make an inch?
A)5
B)2+
C) 200
D)10
Answer: B) 2+
Explanation:
There are exactly 2.54 centimeters in an inch, the closest option is:
B) 2+
Answer:
2.54 centimetres
Explanation:
Ur options are wrong
How many milliliters of a 1 M nitric acid solution are required to prepare 60 mL of 0.15 M solution?
Select the correct answer below:
400 mL
O 9 mL
O 0.25 mL
none of the above
9 mL of a 1 M nitric acid solution are required to prepare 60 mL of 0.15 M solution. Therefore, the correct option is option A.
What is volume?A measurement of three-dimensional space is volume. It is frequently expressed quantitatively using SI-derived units, as well as several imperial or US-standard units. Volume and the notion of length are connected. A container's capacity is typically thought of as being represented by its volume.
Rather considering how much space the container takes up, think about how much fluid it could hold. Volume was initially measured using naturally occurring vessels of a comparable shape and then with standardised containers. Arithmetic formulas can be used to quickly calculate the volume of several straightforward three-dimensional shapes.
V1= m2×v2/m1 = 60 x 0.15 /1 = 9 mL
Therefore, the correct option is option A.
To know more about volume, here:
https://brainly.com/question/23477586
#SPJ2
345.50 grams of C6 H12 O6 = how many mol C6H12O6 ? - (MM=180.16g/mol).
100.0grams of O2 = how many mol O2? - (MM=32.00g/mol).
14.37 moles of AgNO3 = how many grams AgNO3? - (MM= 169.87g/mol).
Answer:
0.56 M
Explanation:
We are given;
Mass of glucose solute is 50.50 g
Volume of solution is 500 mL
We are required to calculate the concentration of glucose.
We need to know that, molarity is the concentration of a solution in moles per liter.
Molarity = Number of moles ÷ Molar mass
what were possible experimental reasons for error in determining the neutralizing power of antacids ?
1000*
Explanation:
the deter monagex has to neutralize power because of the error and that leads to 1000*
An empty beaker has a measured mass of 27.234 g. When some salt is added to the beaker, the combined mass is 35.9564 g. Calculate the mass of the salt only (show work), reporting your answer to the correct number of significant figures.
The mass of the salt only if 35.9564g is the combined mass of the beaker and the salt is 8.7224g
How to calculate mass?According to this question, an empty beaker has a measured mass of 27.234g. However, when some salt is added to the beaker, the combined mass is 35.9564g.
This means that to calculate the mass of the salt in the beaker, we have to subtract the mass of the empty beaker from the combined mass as follows:
mass of salt only = 35.9564g - 27.234g
mass of salt only = 8.7224g
Therefore, the mass of the salt only if 35.9564g is the combined mass of the beaker and the salt is 8.7224g.
Learn more about mass at: https://brainly.com/question/19694949
A firework is fired from the ground straight up on a planet with an acceleration due to gravity of 6.82 m/s/s. The firework will not explode until the moment where it would have started to move back down again. The initial speed of the firework is 69.5 m/s. Use this information to find the height at which the firework explodes and the time it will be traveling upward.
Answer:
h = 384.4 m
t = 8.5 s
Explanation:
The firework will explode at the highest point. Because it would start to move downward at the highest point. Using 3rd equation of motion:
2ah = Vf² - Vi²
where,
a = acceleration due to gravity at that planet = -10.56 m/s²
h = maximum height = ?
Vf = Final velocity = 0 m/s (since, firework stops at highest point)
Vi = Initial Velocity = 90.1 m/s
Therefore,
2(-10.56 m/s²)(h) = (0 m/s)² - (90.1 m/s)²
h = 384.4 m
Now, we use 1st equation of motion:
Vf = Vi + at
0 m/s = 90.1 m/s + (-10.56 m/s²)(t)
t = 8.5 ss
When .080 moles of propane burn at STP, what volume of carbon dioxide is produced?
The answer is 5.4 L (I NEED THE STEPS)
Taking into account the reaction stoichiometry and the definition of STP, 5.4 L of carbon dioxide is produced.
Reaction stoichiometryIn first place, the balanced reaction is:
C₃H₈ + 5 O₂ → 3 CO₂ + 4 H₂O
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
C₃H₈: 1 mole O₂: 5 moles CO₂: 3 moles H₂O: 4 molesMoles of CO₂ formedThe following rule of three can be applied: if by reaction stoichiometry 1 mole of C₃H₈ form 3 moles of CO₂, 0.080 moles of C₃H₈ form how many moles of CO₂?
[tex]amount of moles of CO_{2} =\frac{0.080 moles of C_{3} H_{8}x3 moles of CO_{2} }{1 mole of C_{3} H_{8} }[/tex]
amount of moles of CO₂= 0.24 moles
Definition of STP conditionThe STP conditions refer to the standard temperature and pressure. Pressure values at 1 atmosphere and temperature at 0 ° C are used and are reference values for gases. And in these conditions 1 mole of any gas occupies an approximate volume of 22.4 liters.
Volume of CO₂ producedYou can apply the following rule of three: If by definition of STP 1 mole of CO₂ occupies 22.4 L, 0.24 moles of CO₂ how much volume does it occupy?
[tex]volume of CO_{2} =\frac{0.24 molesx22.4 L}{1 mole}[/tex]
volume of CO₂= 5.376 L ≅ 5.4 L
Finally, 5.4 L of carbon dioxide is produced.
Learn more about
the reaction stoichiometry:
brainly.com/question/24741074
brainly.com/question/24653699
STP conditions:
brainly.com/question/26364483
brainly.com/question/8846039
brainly.com/question/1186356
6Li + N2 → 2Li3N chemical word equation
Answer:
this is an Oxidation-reduction
Explanation:
like is w reducing agent, N2 is an oxidizing agent
.
A species is a group of organisms that closely resemble each other in physical appearance and behavior and can mate and produce young that can also mate and produce young. True or false?
false
true
Answer:
True
Explanation:
It's a true statement
Answer:
True
Explanation:
A species is a group of similar organisms that can breed with one another to produce fertile offspring. For example, humans are one species and dogs are another species. Individuals of the same species can reproduce to make more individuals of the same species.
What’s the answer?????? I accidentally clicked the 1st one.
Answer:
its the 1st one at the top
Calculate the specific heat in J/(g·ºC) of an unknown substance if a 2.50-g sample releases 12.0 cal as its temperature changes from 25.0ºC to 20.0ºC. _________J/(g·°C)
Answer:
[tex]\fbox{c = - 4.01 \: joule/g°C}[/tex]
Step by step explanation:
Given:
Mass of given sample (m) = 2.50 g
Initial temperature (T1) = 25°C
Final temperature (T2) = 20°C
Heat Energy Q = 12 cal
To find:
[tex]Specific \: Heat \: c = \: ?[/tex]
Solution:
We know that,
Specific heat of any substance is directly proportional to the mass and change in temperature.
Represented by equation,
[tex]Q = mc \triangle T[/tex]
Where,
Q = Heat Energy
m = mass of given sample
c = specific heat
∆T = change in temperature
Substituting corresponding values,
[tex]Q = mc \triangle T \\ 12 = 2.5\times c \times (20-25) \\ c = \frac{12}{2.5 \times ( - 5)} \\ c = - 0.96 \: cal/g°C \\ [/tex]
We also know that,
[tex]1 \: cal = 4.184 \: joules[/tex]
multiplying above answer by 4.184,
[tex]c = - 0.96 \times 4.184 \\ \fbox{c = - 4.01 \: joule/g°C}[/tex]
Thanks for joining brainly community!
2. If you were to take a radio to the moon, which of the following would
correctly describe the changes to its mass and weight?
A. Its mass and weight would not change.
B. Its mass would increase, and its weight would remain the same
C. Its weight would increase, and its mass would remain the same
D. Its weight would decrease, and its mass would remain the sam
An electromagnet _____________
A. is stronger than a permanent magnet
B. points north
C. can be turned on and off
D. makes noise
I need the answer fast PLS
Answer:
C. can be turned on and off
Explanation:
An electromagnet becomes magnetic when it is part of a complete electric circuit. A switch is a part of an electric circuit that completes or break the circuit turning the circuit on and off.
(*) Sorry for my late answer but I hope this helps others that are looking for this.
I got 100% ;)
How many atoms are in 0.560 moles of iron?
Answer:
3.37 × 10²³ atoms
Explanation:
Number of atoms = number of moles × 6.02 × 10²³
Number of atoms = 0.560 × 6.02 × 10²³
Number of atoms = 3.37 × 10²³ atoms
Which 2 elements has reactivity that is similar to chlorine?
An old 0.500 L lecture bottle of triethylamine (N(CH₂CH₃)₃) was found in a lab and needed for a synthesis reaction. A pressure regulator indicated a pressure of 27.0 psi, and the lab was at room temperature (25.0°C). What mass of vaporized triethylamine in grams was left in the lecture bottle?
Answer:
About 3.81 grams.
Explanation:
We can use the ideal gas law. Recall that:
[tex]\displaystyle PV = nRT[/tex]
Note that the universal gas constant R has the value 0.08206 L-atm/mol-K.
Hence, convert the measured pressure to atms (1 atm = 14.7 psi):
[tex]\displaystyle 27.0\text{ psi} \cdot \frac{1\text{ atm}}{14.7\text{ psi}} = 1.84\text{ atm}[/tex]
Rearrange the equation to solve for n, the number of moles of vaporized triethylamine and evaluate. The temperature is (25.0 + 273.15 ) K = 298.2 K:
[tex]\displaystyle \begin{aligned} n& = \frac{PV}{RT} \\ \\ & = \frac{(1.84\text{ atm})(0.500\text{ L})}{\left(\dfrac{0.08206\text{ L - atm}}{\text{mol-K}}\right)(273.2\text{ K})} \\ \\ &= 0.0376\text{ mol N(CH$_2$CH$_3$)$_3$}\end{aligned}[/tex]
Convert from moles to grams:
[tex]\displaystyle 0.0376\text{ mol N(CH$_2$CH$_3$)$_3$} \cdot \frac{101.22\text{ g N(CH$_2$CH$_3$)$_3$}}{1\text{ mol N(CH$_2$CH$_3$)$_3$}} = 3.81\text{ g N(CH$_2$CH$_3$)$_3$}}[/tex]
In conclusion, there is about 3.81 grams of vaporized triethylamine in the lecture bottle.
What are two relatively unique physical properties of water? What impact do these properties have on life on Earth?
Answer:
Polar molecule. A neutral, or uncharged molecule that has an asymmetric internal distribution of charge, leading to partially positive and partially negative regions
Cohesion The attraction of molecules for other molecules of the same kind
Adhesion The attraction of molecules for other molecules of a different kind
Density The mass per unit volume of a substance
Specific heat capacity The amount of heat needed to raise the temperature of one gram of a substance by one degree Celsius
Heat of vaporization The amount of energy needed to change one gram of a liquid substance to a gas at constant temperature
Polar substance. a molecule that is neutral or uncharged but has an asymmetric internal charge distribution that produces both positive and negative regions.
What are Physical properties ?Cohesion molecules' attraction to other molecules of the same sort. Adhesion the pull of certain molecules toward others of a different type
Density a substance's mass per unit volume particular heat capacity The amount of heat required to increase a substance's temperature by one degree Celsius in one gram
Vaporization-related heat energy required to convert one gram of a liquid material into a gas at a fixed temperature.
Therefore, Polar substance. a molecule that is neutral or uncharged but has an asymmetric internal charge distribution that produces both positive and negative regions.
To learn more about Physical property, refer to the link:
https://brainly.com/question/31131341
#SPJ2
