The detection time when an industrial process wastewater contains a mixture of metal fragments and sand is 1392.8 seconds.
How to calculate the detection time?From the information regarding the industrial process wastewater, the settling velocity for the sand particles will be:
= 9.81/[18(1.002 × 10^-6] × (2.65 - 1) × (0.04 × 10^-³)²
= 0.001435
Therefore, the detection time will be:
t = 2/0.001435
t = 1392.8 seconds.
The detection time is 1392.8 seconds.
Learn more about time on:
https://brainly.com/question/2854969
#SPJ1
Stages of elution and regeneration
The resin may be regenerated by washing it again with water and making it safe for use again.
What is elution and regeneration ?Elution and regeneration are important processes in the treatment of water. The waste water is eluted through an ion exchange resin in which exchange of ions takes place.
The resin may be regenerated by washing it again with water and making it safe for use again.
Learn more about ion exchange resin:https://brainly.com/question/21794387
#SPJ1
If 22.5L of nitrogen at 0.98 atm is compressed to 0.95 atm,what is the new volume?
At constant temperature, if the pressure is compressed to the given value, the volume of the nitrogen gas increases to 23.2L.
What is Boyle's law?Boyle's law simply states that "the volume of any given quantity of gas is inversely proportional to its pressure as long as temperature remains constant.
Boyle's law is expressed as;
P₁V₁ = P₂V₂
Where P₁ is Initial Pressure, V₁ is Initial volume, P₂ is Final Pressure and V₂ is Final volume.
Given that;
Initial volume of the gas V₁ = 22.5LInitial pressure of the gas P₁ = 0.98atmFinal pressure of the gas P₂ = 0.95atmFinal volume of the gas V₂ = ?P₁V₁ = P₂V₂
V₂ = P₁V₁ / P₂
V₂ = (0.98atm × 22.5L) / 0.95atm
V₂ = 22.05Latm / 0.95atm
V₂ = 23.2L
Therefore, at constant temperature, if the pressure is compressed to the given value, the volume of the nitrogen gas increases to 23.2L.
Learn more about Boyle's law here: brainly.com/question/1437490
#SPJ1
If you had 1 mol of Cr7(PO4)3 how many moles of Cr would there be?
What is the pH of a 4.2 x 10^-3 solution of HCl?
Answer:
pH = 2.38
Explanation:
Recall that HCl is a strong acid and hence dissociates completely into H⁺ and Cl⁻ ions. Thus, the solution's H⁺ concentration is equivalent to the acid concentration. That is, [H⁺] = 4.2 × 10⁻³ M.
Therefore, the pH of the solution is:
[tex]\displaystyle \begin{aligned}\text{pH} & = -\log[\text{H}^+] \\ \\ & = -\log (4.2\times 10^{-3}) \\ \\ & = 2.38\end{aligned}[/tex]
Answer:
HCl + H[tex]\\ 2[/tex]O —> Cl- + H[tex]\\ 3[/tex]O+
pH = -log [H[tex]\\ 3[/tex]O+] = -log [4.2 x 10^-3] = 2.38
—
We assume that hydrochloric acid will undergo complete dissociation in water to give stoichiometric H3O+ ion, according to the given reaction.
—
Have a nice day!!
Please help!!! Only one try. Explain why the answer is the right answer
Which equation is an example of artificial transmutation
Answer:Nitrogen can be transformed into oxygen by bombarding an alpha particle into the nucleus of nitrogen. An atom of hydrogen is produced as part of the transformation. Aluminum is transformed into phosphorous by combining the nucleus with an alpha particle
Explanation:
How Is Your Mind Related to Your Body
Answer:
The brain and body are connected through neural pathways made up of neurotransmitters, hormones and chemicals. These pathways transmit signals between the body and the brain to control our everyday functions, from breathing, digestion and pain sensations to movement, thinking and feeling.
if 14.0 g of sodium sulfide are reacting how many molecules of sodium chloride will be produced
Explanation:
If 14.0 g of sodium sulfide are reacting, how many molecules of sodium chloride will be produced?
3 Na₂S + 2 AICI36 NaCl + Al2S3
1.08 x 10^23
2.16 x 10^23
2.16 x 10^-23
5.97 x 10^-25
will favor dissolution and
will favor crystallization in a saturated solution of table sugar.
a. cooling, heating
b. heating, cooling
C. evaporation, heating
d. cooling, evaporation
Answer:
b) heating, cooling
Explanation:
Heating will favour dissolution (it helps dissolving faster).
Cooling helps in crystallization.
Which part of the heart takes blood from the veins and pumps it into a ventricle?
arteries
ventricles
valves
atria
Answer:
Atria
Explanation:
The part of the heart takes blood from the veins and pumps it into ventricle is called atria
Describe the population density located along the tectonic plate boundary known as the Ring of Fire and the potential effect that earthquakes or volcanic
activity can have in this area.
(Pls no links)
Population density is the number of specific organisms living in a particular area. The tectonic plate movements in the Ring of Fire area can cause volcanic eruptions and earthquakes.
What are tectonic plates?Tectonic plates are the parts of the crust and the mantle of the earth layer that is also called the lithosphere plate. They are not stationary and have slight movements on the mantle which comprises the hot lava.
The movement of these tectonic plates in the area of the Ring of fire causes the eruption of the lava and disrupts the crust causing an earthquake. This consequence affects the life habiting them.
Learn more about tectonic plates here:
https://brainly.com/question/11840787
#SPJ1
Answer:
im pretty sure because the plates move which causes these natural disasters
Explanation:
Which explanation describes the last part of a chemical reaction?
Reactants collide to form a transition state.
Transition state falls apart to form products.
Products collide to form reactants.
Reactants collide to form products.
I am not sure between Reactants collide to form a transition state and Transition state falls apart to form products. please put an explanation.
Answer:
Transition state falls apart to form products.
Explanation:
Reactants collide to form a transition state is actually the initial step (not the last step) because reactants have react with each other. Transition state is the middle stage, once this stage falls or passes, you get products. I have attached an example reaction scheme to better understand.
The density of methane at 0 degree Celsius and 1 atm pressure is 0.668g/L. If 1 lb is equal to 454 grams, 1 L is equal to 1000cm3 and 1 inch is equal to 2.54 cm, what is the density in pounds per cubic inch
The value of density in the required units is [tex]\rm \rho = 2.4\times 10^{-5} lb/in^{3}[/tex]
What is Density ?Density, mass of a unit volume of a material substance. The formula for density is
d = M/V
where d is density, M is mass, and V is volume.
Density is commonly expressed in units of grams per cubic centimetre.
In the given question
Density given is 0.668 g/L
1 lb = 454grams.
1L = 1000 cm³
1 inch = 2.54 cm
Density in pounds per cubic inch =
[tex]\rm \rho = 0.668 \times \dfrac{(1 \;lb)(1 grams)}{454\; grams}\times \dfrac{(1 L)(2.54)^{3}(1 cm^{3})}{1000cm^{3}(1\;L)(1 in^{3})}[/tex]
[tex]\rm \rho = 2.4\times 10^{-5} lb/in^{3}[/tex]
Therefore the value of density in the required units is [tex]\rm \rho = 2.4\times 10^{-5} lb/in^{3}[/tex].
To know more about density
https://brainly.com/question/15164682
#SPJ1
Which substance is completely consumed in a chemical reaction?
product
reactant
limiting reactant
Answer:
Limiting reactant
Explanation:
In a chemical reaction is the substance that is totally consumed when the chemical reaction is complete.
Calculate the [H+], given the pH is 2.5
a
0.31 M
b
0.25 M
c
0.50 M
d
0.003 M
Answer:
D. 0.003
Explanation:
To find [H+] given pH, you do 10^-[pH]
10^-2.5 = 0.003
Three elements, A, Q, and Z, have the molar masses indicated in the table below. Given a compound with a composition of 15.66% A and 84.34% Z by mass, what is the empirical formula of this compound?
element symbol molar mass
A 15.45 g/mol
Q 20.05 g/mol
Z 41.62 g/mol
Answer:
AZ₂
Explanation:
The formed compound will not contain Q because mass percentages, %A and %B, form 100% of the compound.
Steps
Change % of each element into grams.Convert grams of each element into moles by dividing grams by molar mass.Divide all moles by the smallest number of moles.If the moles are all whole numbers, then you’re done and that’s your empirical formula.If not, multiply all moles by number such that everything is a whole number.Solving
We have 15.66g of A and 84.34g of ZMoles of A, n(A) = 15.66/15.45 = 1.01 molesMoles of Z, n(Z) = 84.34/41.62 = 2.02 molesA = 1.01/1.01 = 1 and Z = 2.02/1.01 = 2Therefore, the empirical formula is AZ₂1. Which substance dissolves in water to give a solution with a pH greater
than 7?
A Sulphur dioxide
B Sodium oxide
С Sodium chloride
D Carbon dioxide
Answer: sulphur dioxide
Explanation:
# 1083 of LethalDose
Concentrated hydrochloric acid is 38%, by mass, HCI in water. How
many grams of HCI are there in 25.0 g concentrated hydrochloric acid?
Select one:
O a. 38.0 g
O b.
25.0 g
O c. 16.5 g
O d. 12.0 g
O e. 9.50 g
The amount, in grams, of HCl that are in 25.0 grams of concentrated hydrochloric acid will be 9.5 grams
Percentage contentEvery concentrated HCl contains 38% HCl by mass. This means that 38 grams of HCl would be in every 100 grams of concentrated HCl.
There, for 25.0 grams concentrated HCl, the amount of HCl can be calculated as:
38/100 x 25.0 = 9.5 grams
More on percentage constituents can be found here: https://brainly.com/question/26100988
#SPJ1
Which one of the following statements about nuclear reactions is false?
(a) Particles within the nucleus are involved.
(b) No new elements can be produced.
(c) Rate of reaction is independent of the presence of a catalyst.
(d) Rate of reaction is independent of temperature.
(e) They are often accompanied by the release of enormous amounts of energy.
The statement 'No new elements can be produced' about nuclear reactions is false (Option b).
What are nuclear reactions?Nuclear reactions are specific reactions that involve atomic nuclei such as fusion reactions and fision reactions.
The atomic nuclei are composed of particles that can react to form new atoms (i.e., protons and neutrons).
In conclusion, the statement 'No new elements can be produced' about nuclear reactions is false (Option b).
Learn more about nuclear reactions here:
https://brainly.com/question/984564
#SPJ1
help for this practice work
Answer:
It's the third option.
Explanation:
In order for the chemical equation to be correctly it needs the same number of atoms of each element on both sides of the equal sign
CCC Matter and Energy The dashed curve shows
the average amount of radiation emitted by each
square meter of Earth's surface. On its way up,
some of that energy is absorbed or scattered by
the atmosphere. The solid curve shows the amount
that would be observed looking down from the
"top of the atmosphere" (TOA). Explain why there
are "dips" in that curve.
The amount of absorption force is not same at all time and at all where .
It has difference at different time periods
So during those the curve goes up and down and repeat this flow
So there are dips
According to one acid base theory the water acts as ?
Determine the amount of energy required to heat 4.00 grams of H₂O (t) at 60°C to H₂O (t) at 85°C.
Answer: See attached image
Explanation:
the answer to 54.34g-45.6g has how many significant figures
How much of a 14.0 M HNO3 solution should you use to make 840.0 mL of a 0.300 M HNO3 HNO3 solution?
39200 mL of a 14.0 M [tex]HNO_3[/tex] solution should you use to make 840.0 mL of a 0.300 M [tex]HNO_3[/tex] solution.
What are moles?The mole is the amount of substance of a system which contains as many elementary entities as there are atoms in 0.012 kilograms of carbon 12; its symbol is “mol”.
Solution:
[tex]M_1V_1 = M_2V_2[/tex]
In this case, [tex]M_1[/tex] = 840.0 mL, [tex]V_1[/tex]= 14.0 M , [tex]M_2[/tex]= 0.300 M
Substituting the value in the equation:
[tex]V_2[/tex] = [tex]\frac{840.0 X 14.0}{0.300}[/tex]
= 39200 mL
Learn about moles here:
ps://brainly.com/question/15209553
#SPJ1
Which reason explains why the boiling point of water (H2O) is higher than the boiling point of hydrogen sulfide(H2S)
Options:
Ionic bonding
Covalent bonding
Hydrogen bonding
London dispersion forced
When did Stone become interested in caving?
As a child
In high school
During college
After he was 30 years old
Answer:
William Stone (American Caver) became interested in caving in High school .
water comes from different a.levels b.phases c.sources d.stages
Answer:
C. sources
Explanation:
How does soil convert the organic matter back to co2
A gas has a volume of 1400 mL at a temperature of 20.00 K and a pressure
of 101.3 kPa. What will be the new volume when the temperature is
changed to 40.00 K and the pressure is changed to 50.65 kPa?
The question is Given:Gas×Temperature×Pressure
Gas=1400ml
Temperature=20.00K
Pressure=101.3kpa
140ml×20.00K×101.3 K Pa
total =6,00.00
and when the volume of temperature changed to 40.00 K and the pressure is changed to 50.65 kPa.
Solution will 40.00 K× 50.65 kPa
total of the changes is 200.
3. Determine the amount of energy required to heat 3.50 moles of water vapor from 107°C to 13
4. How much energy is needed to heat a 27.50 grams of H₂O (s) at -20°C to H₂O (l) at 0°C?
Answer: See attached image
Explanation:
