1. Before starting, make a prediction: If substances B and C are both in the gas phase and are at the same energy level, which of the two substances will need to have more energy transferred out in order to change to the liquid phase? Substance B or substance C? Explain your answer.

Answer:

Atmosphere

Explanation:

Natural gas is mainly hydrocarbons like C3H8 and that has hydrogens, water is H2O and had hydrogens, mines have it in the minerals.

We can describe a positive energetic process as any process which increases the internal energy of the system.

A positive energetic reaction or process is often referred to as being Endothermic. This means that the system which is performing the process absorbs energy. Some examples include:

etc

Therefore, we can confirm that a positive energetic process is one in which the system in question absorbs energy, thus increasing its internal energy.

Since I could not locate the options online, I have provided a general explanation of the concept coupled with a few examples.

To learn more visit:

https://brainly.com/question/4345448?referrer=searchResults

Molecular substances tend to be gases because the intermolecular forces of attraction are comparatively weak. You don't have to break any covalent bonds in order to melt or boil a molecular substance.

The longest intermolecular separation and hence the strongest intermolecular pressure of attraction can be found in the gaseous state of matter.

Although solids' intermolecular interactions were sufficient to maintain themselves in locked places, gases often have weak intermolecular forces that cause them to remain considerably separated. The gases possess greater intermolecular space than solids as a result of these weak forces.

To know more about molecular forces:

https://brainly.com/question/21826959

#SPJ1

[tex]\huge \bf༆ Answer ༄[/tex]

The element having valency of 1 is ~

Answer: Pretty sure this is d.) sodium

Explanation:

Answer:

self-pollination.

Explanation:

When the pollen of the flower is transferred to the stigma of the same flower, it is called self-pollination. Cross-pollination occurs when pollen is transferred from one flower to another flower on the same plant, or another plant.

Answer:

the answer is NO or nitric oxide.

hope this helps, love. have a good day

Explanation:

Empirical formula is the simplest whole number ration of elements in a compound. Molecular formula is n times the empirical formula, where n is integers 1,2,... Therefore, the empirical formula is NO[tex]_2[/tex].

Empirical formula gives the proportion of the element that is present in a compound. It does not give information about the actual number or the arrangements of the atoms.

The relation between molecular formula and empirical formula can be given as

n= molecular formula÷ empirical formula

Number of gram atoms in compound and divide by smallest Number of gram atoms in compound

N=(25.94%)÷14=1.85/1.85=1

O=( 74.06% )÷16=4.62/1.85=2

The atomic ratio is 1:2

Whole number N:O is1:2

Empirical formula corresponding to this whole number is NO[tex]_2[/tex].

Therefore, the empirical formula is NO[tex]_2[/tex].

To know more about empirical formula, here:

https://brainly.com/question/21743699

#SPJ2

Answer:

Covalent bonds usually occur between nonmetals. For example, in water (H2O) each hydrogen (H) and oxygen (O) share a pair of electrons to make a molecule of two hydrogen atoms single bonded to a single oxygen atom. In general, ionic bonds occur between elements that are far apart on the periodic table.

A. Sodium bicarbonate is a water treatment method used to soften water (removing calcium and magnesium impurities from it) in older water softener systems. The process uses a chemical reaction to convert the calcium hydroxide (or magnesium hydroxide) into calcium carbonate, which isn't water soluble.

B. Alum, also known as potassium aluminum sulfate, can be used to purify water. ... Add 1.4 ounces of alum powder to the contaminated water in the reaction vessel and carefully stir the mixture with the stirring stick for at least five minutes. Sediment will form as the phosphorous in the water binds with the alum powder.

C. If Copper sulphate crystals are added to water it is called 'hydrated copper sulphate solution'.

If it is added to cold water then:-

it is more saturated

but if it is added to warm water then:-

it is unsaturated

and it turns bluish in colour in dissolving in water

D.  Sodium hydroxide is used in the treatment of drinking water to raise the pH of the water to a level that minimizes the corrosion. Raising the pH remains one of the most effective methods for reducing lead corrosion and minimizing lead levels in drinking water.

Answer:

1. melting

2boiling

3. freezing

4. condesation

Explanation:

Answer:

3rd  lawl

Explanation:

a rifle kick is when you fire a projectile and you feel a force pushing against your hand. Rifles normally have heavier projectiles so there is more force pushing back against you. example, if you were sitting on a spinny chair with wheeles and your friend is sitting on another, and you push each other while on the chair, you will both go backward, but the lighter person will go back more. for every action, there is an equal and opposite reaction

that is the third law, also said as: "When one body exerts a force on a second body, the second body simultaneously exerts a force equal in magnitude and opposite in direction on the first body."

Total mass of carbon must be decreasing in different step of carbon cycle because matter is conserved in the processes and reactions of carbon cycle. Carbon is a matter and it is the major constituent of living organisms.

Carbon cycle refers to processes where carbon move from the atmosphere to the biosphere and Earth and then back to the atmosphere.

It involves processes of using and reusing carbon again and again and it's conservation.

Carbon is an organic matter found in living organisms and total mass of carbon reduces because it is a matter that is conserved.

Carbon is released from that atmosphere, use for photosynthesis, plants and animals consume the plants. They defecate , respirate and carbondioxide is released during respiration.

Therefore,Total mass of carbon must be decreasing in different step of carbon cycle because because matter is conserved in the processes and reactions of carbon cycle. Carbon is a matter and it is the major constituent of living organisms.

Learn more about Carbon cycle from the link below.

https://brainly.com/question/20830841

The binary salt among the given salts is CaCl₂. The correct option is d,CaCl₂

From the question,

We are to identify the binary salt among the given salts.

First, we will define the term binary salt

A binary salt is a chemical compound that is formed from the mixture of a metal and a non-metal.

Among the given options, CaCl₂ is the salt formed from the mixture of a metal and a non-metal.

The metal is Calcium (Ca)

and the non-metal is Chlorine (Cl)

Hence, the binary salt among the given salts is CaCl₂. The correct option is d,CaCl₂

Learn more here: https://brainly.com/question/3103303

Answer:

Meteorology

Explanation:

Meteorology focuses on Earth's atmosphere and, especially, how changes in the atmosphere affect weather and climate on Earth's surface.

Answer:

It’s in the photo, sorry if it’s really messy!

Explanation:

Please ask if you have any questions!

cyanoacrylate

When cyanoacrylate polymerizes, the cyanoacrylate sticks together on an atomic level, and it becomes solid. Super Glue solidifies in all the microscopic crevices of an object that it moved into when it was a liquid, and it can form chemical bonds with any anions in the object.

Answer:  no

Explanation:

Atoms are not and have never been alive so they can't be considered dead. they simply do not meet any reasonable of life, primarily because they are not complex.

There are 0.566 moles of carbonate in sodium carbonate.

Learn more about number of moles at: https://brainly.com/question/1542846

600 kg·m/s

Mass = 200 kg

Velocity = 3 m/s

Power = Mass * Velocity = 200 kg * 3 m/s = 600 kg·m/s

Answer:

d. 10

Explanation:

The 24 means the atomic mass and twelve means the number of electrons. You subtract the number of electrons from the atomic mass. 24-12=12

Then, since there's +2, you subtract 2 from 12 which equals 10 which means there are 10 electrons now.

The confusing thing is that + means subtract and - means add here.

Hope this helps.

Answer:

igneous

Explanation:

key word: melt, cool. igneous rocks are when lava is melted then cooled off, then becoming a igneous rock.

Answer:

Personally, I use Superglue

Explanation:

Answer:

[tex]1.51 \times 1024 \: \: molecules[/tex]

Explanation:

There are 1.51 x 1024 molecules of carbon dioxide in 2.50 moles of carbon dioxide.

Answer:

9.17 g

Explanation:

1) Calculate mols of PCl5

PCl5 (aq) + 4H2O (l) ⟶ H3PO4 (aq) + 5HCl (aq)

Mass of PCl5: 26.5g

Molar Mass of PCl5 208.24g/mol

Mol of PCl5 = Mass PCl5 /Molar mass PCl5  = 26.5g / (208.24g/mol) = 0.127257011 mol

2) Calculate mols of water needed to react

Mols of H2O per 1 Mols of PCl5 = 4 (because 4 water is needed to Phosphorus pentachloride).

Mols of H2O = Mol of PCl5 * 4 = 0.127257011 * 4 = 0.509028044 mols

3) Calculate Grams of water needed to react

Mols of H2O = 0.509028044 mols

Molar Mass of H2O = 18.015 g/mol

Mass of H2O = Mols of H2O * Molar Mass of H2O

= 0.509028044 mols* 18.015 g/mol = 9.17014021 g

sf = 3

9.17 g

Answer:

D — All of them

Explanation:

The activation energy in a reaction is the minimum amount of energy required for a chemical reaction to take place. Since all the options are processes in a chemical reaction, D should be the answer.

Answer:

1. any class of adhesives, plastics, or other materials that are polymers of epoxies.

2. something like glue or resin

Explanation:

that's the dictionary definition of epoxy.

Answer: The statement that correctly describes a physical change is may involve a change in phase but does not involve a change in the molecular structure. The answer is letter B.

Explanation: trust me

Explanation:

OA- because there is breakdown of chemical bonds